#include <GeEllipArc2d.h>

Inheritance diagram for OdGeEllipArc2d:

Public Member Functions
	OdGeEllipArc2d ()

	OdGeEllipArc2d (const OdGeEllipArc2d &ell)

	OdGeEllipArc2d (const OdGeCircArc2d &arc)

	OdGeEllipArc2d (const OdGePoint2d &center, const OdGeVector2d &majorAxis, const OdGeVector2d &minorAxis, double majorRadius, double minorRadius)

	OdGeEllipArc2d (const OdGePoint2d &center, const OdGeVector2d &majorAxis, const OdGeVector2d &minorAxis, double majorRadius, double minorRadius, double startAng, double endAng)

bool	intersectWith (const OdGeLinearEnt2d &line, int &numInt, OdGePoint2d &p1, OdGePoint2d &p2, const OdGeTol &tol=OdGeContext::gTol) const

bool	isCircular (const OdGeTol &tol=OdGeContext::gTol) const

bool	isInside (const OdGePoint2d &point, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint2d	center () const

double	minorRadius () const

double	majorRadius () const

OdGeVector2d	minorAxis () const

OdGeVector2d	majorAxis () const

double	startAng () const

double	endAng () const

OdGePoint2d	startPoint () const

OdGePoint2d	endPoint () const

bool	isClockWise () const

OdGeEllipArc2d &	setCenter (const OdGePoint2d &center)

OdGeEllipArc2d &	setMinorRadius (double rad)

OdGeEllipArc2d &	setMajorRadius (double rad)

OdGeEllipArc2d &	setAxes (const OdGeVector2d &majorAxis, const OdGeVector2d &minorAxis)

OdGeEllipArc2d &	setAngles (double startAng, double endAng)

OdGeEllipArc2d &	set (const OdGePoint2d &center, const OdGeVector2d &majorAxis, const OdGeVector2d &minorAxis, double majorRadius, double minorRadius)

OdGeEllipArc2d &	set (const OdGePoint2d &center, const OdGeVector2d &majorAxis, const OdGeVector2d &minorAxis, double majorRadius, double minorRadius, double startAng, double endAng)

OdGeEllipArc2d &	set (const OdGeCircArc2d &arc)

OdGeEllipArc2d &	operator= (const OdGeEllipArc2d &ell)

void	getGeomExtents (OdGeExtents2d &extents) const

void	inverseTangent (OdGeVector2d tan, OdGeDoubleArray &params) const

Public Member Functions inherited from OdGeCurve2d
void	getInterval (OdGeInterval &interval) const

void	getInterval (OdGeInterval &interval, OdGePoint2d &start, OdGePoint2d &end) const

OdGeCurve2d &	reverseParam ()

OdGeCurve2d &	setInterval ()

bool	setInterval (const OdGeInterval &interval)

double	distanceTo (const OdGePoint2d &point, const OdGeTol &tol=OdGeContext::gTol) const

double	distanceTo (const OdGeCurve2d &otherCur, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint2d	closestPointTo (const OdGePoint2d &point, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint2d	closestPointTo (const OdGeCurve2d &curve2d, OdGePoint2d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getClosestPointTo (const OdGePoint2d &point, OdGePointOnCurve2d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getClosestPointTo (const OdGeCurve2d &curve2d, OdGePointOnCurve2d &pntOnThisCrv, OdGePointOnCurve2d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

bool	getNormalPoint (const OdGePoint2d &point, OdGePointOnCurve2d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const

	TD_USING (OdGeEntity2d::isOn)

bool	isOn (const OdGePoint2d &point, double &param, const OdGeTol &tol=OdGeContext::gTol) const

bool	isOn (double param, const OdGeTol &tol=OdGeContext::gTol) const

double	paramOf (const OdGePoint2d &point, const OdGeTol &tol=OdGeContext::gTol) const

void	getTrimmedOffset (double distance, OdGeCurve2dPtrArray &offsetCurveList, OdGe::OffsetCrvExtType extensionType=OdGe::kFillet, const OdGeTol &tol=OdGeContext::gTol) const

bool	isClosed (const OdGeTol &tol=OdGeContext::gTol) const

bool	isPeriodic (double &period) const

bool	isLinear (OdGeLine2d &line, const OdGeTol &tol=OdGeContext::gTol) const

double	length (double fromParam, double toParam, double tol=OdGeContext::gTol.equalPoint()) const

double	length (double tol=OdGeContext::gTol.equalPoint()) const

double	paramAtLength (double datumParam, double length, bool posParamDir=true, double tol=OdGeContext::gTol.equalPoint()) const

bool	area (double startParam, double endParam, double &value, const OdGeTol &tol=OdGeContext::gTol) const

bool	isDegenerate (OdGe::EntityId &degenerateType, const OdGeTol &tol=OdGeContext::gTol) const

bool	isDegenerate (OdGeEntity2d *&pConvertedEntity, const OdGeTol &tol=OdGeContext::gTol) const

void	getSplitCurves (double param, OdGeCurve2d &piece1, OdGeCurve2d &piece2) const

bool	explode (OdGeCurve2dPtrArray &explodedCurves, OdGeIntArray &newExplodedCurve, const OdGeInterval *interval=NULL) const

void	getLocalClosestPoints (const OdGePoint2d &point, OdGePointOnCurve2d &approxPnt, const OdGeInterval *nbhd=NULL, const OdGeTol &tol=OdGeContext::gTol) const

void	getLocalClosestPoints (const OdGeCurve2d &otherCurve, OdGePointOnCurve2d &approxPntOnThisCrv, OdGePointOnCurve2d &approxPntOnOtherCrv, const OdGeInterval nbhd1=NULL, const OdGeInterval nbhd2=NULL, const OdGeTol &tol=OdGeContext::gTol) const

OdGeBoundBlock2d	boundBlock () const

OdGeBoundBlock2d	boundBlock (const OdGeInterval &range) const

OdGeBoundBlock2d	orthoBoundBlock () const

OdGeBoundBlock2d	orthoBoundBlock (const OdGeInterval &range) const

bool	hasStartPoint (OdGePoint2d &startPoint) const

bool	hasEndPoint (OdGePoint2d &endPoint) const

OdGePoint2d	evalPoint (double param) const

OdGePoint2d	evalPoint (double param, int numDeriv, OdGeVector2dArray &derivatives) const

void	getSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint2dArray &pointArray, OdGeDoubleArray &paramArray) const

void	getSamplePoints (int numSample, OdGePoint2dArray &pointArray) const

OdGeCurve2d &	operator= (const OdGeCurve2d &curve)

void	getSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint2dArray &pointArray, OdGeDoubleArray *pParamArray=NULL) const

void	appendSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint2dArray &pointArray, OdGeDoubleArray *pParamArray=NULL) const

void	appendSamplePoints (int numSample, OdGePoint2dArray &pointArray) const

Public Member Functions inherited from OdGeEntity2d
	ODRX_HEAP_OPERATORS ()

bool	isKindOf (OdGe::EntityId entType) const

OdGe::EntityId	type () const

OdGeEntity2d *	copy () const

OdGeEntity2d &	operator= (const OdGeEntity2d &entity)

bool	operator== (const OdGeEntity2d &entity) const

bool	operator!= (const OdGeEntity2d &entity) const

bool	isEqualTo (const OdGeEntity2d &other, const OdGeTol &tol=OdGeContext::gTol) const

OdGeEntity2d &	transformBy (const OdGeMatrix2d &xfm)

OdGeEntity2d &	translateBy (const OdGeVector2d &translateVec)

OdGeEntity2d &	rotateBy (double angle, const OdGePoint2d &basePoint=OdGePoint2d::kOrigin)

OdGeEntity2d &	mirror (const OdGeLine2d &line)

OdGeEntity2d &	scaleBy (double scaleFactor, const OdGePoint2d &basePoint=OdGePoint2d::kOrigin)

bool	isOn (const OdGePoint2d &point, const OdGeTol &tol=OdGeContext::gTol) const

	~OdGeEntity2d ()

Additional Inherited Members
Protected Member Functions inherited from OdGeCurve2d
	OdGeCurve2d ()

	OdGeCurve2d (const OdGeCurve2d &source)

Protected Member Functions inherited from OdGeEntity2d
	OdGeEntity2d ()

	OdGeEntity2d (const OdGeEntity2d &)

void	connectTo (OdGeEntity2dImpl *)

Detailed Description

This class represents elliptical arcs and full ellipses in 2D space.

Remarks: The angle of a point on an ellipse is measured by projecting the point along a vector perpendicular to the major axis onto a circle whose center is the center of this ellipse and whose radius is the major radius of this ellipse.

The angle between the major axis of this ellipse, and a vector from the center of this ellipse to the intersection point with the circle, measured counterclockwise, is the angle of this point on the ellipse.

Corresponding C++ library: TD_Ge

\sa

Definition at line 57 of file GeEllipArc2d.h.

Constructor & Destructor Documentation

◆ OdGeEllipArc2d() [1/5]

OdGeEllipArc2d::OdGeEllipArc2d ( )

Parameters

center	[in] The center of this elliptical arc.
majorAxis	[in] The major axis of this elliptical arc.
minorAxis	[in] The minor axis of this elliptical arc.
majorRadius	[in] The major radius of this elliptical arc.
minorRadius	[in] The minor radius of this elliptical arc.
startAng	[in] Starting angle of this elliptical arc.
endAng	[in] Ending angle of this elliptical arc.
source	[in] Object to be cloned.

Remarks: All angles are expressed in radians.

◆ OdGeEllipArc2d() [2/5]

OdGeEllipArc2d::OdGeEllipArc2d ( const OdGeEllipArc2d & ell )

◆ OdGeEllipArc2d() [3/5]

OdGeEllipArc2d::OdGeEllipArc2d ( const OdGeCircArc2d & arc )

◆ OdGeEllipArc2d() [4/5]

OdGeEllipArc2d::OdGeEllipArc2d	(	const OdGePoint2d &	center,
		const OdGeVector2d &	majorAxis,
		const OdGeVector2d &	minorAxis,
		double	majorRadius,
		double	minorRadius
	)

◆ OdGeEllipArc2d() [5/5]

OdGeEllipArc2d::OdGeEllipArc2d	(	const OdGePoint2d &	center,
		const OdGeVector2d &	majorAxis,
		const OdGeVector2d &	minorAxis,
		double	majorRadius,
		double	minorRadius,
		double	startAng,
		double	endAng
	)

Member Function Documentation

◆ center()

OdGePoint2d OdGeEllipArc2d::center ( ) const

Returns the center of this elliptical arc.

◆ endAng()

double OdGeEllipArc2d::endAng ( ) const

Returns the end angle measured from major axis of this elliptical arc.

Remarks: All angles are expressed in radians.

◆ endPoint()

OdGePoint2d OdGeEllipArc2d::endPoint ( ) const

Returns the end point of this elliptical arc.

◆ getGeomExtents()

void OdGeEllipArc2d::getGeomExtents ( OdGeExtents2d & extents ) const

Returns the geometric extents of this elliptical arc.

Parameters

extents [out] Receives the geometric extents.

◆ intersectWith()

bool OdGeEllipArc2d::intersectWith	(	const OdGeLinearEnt2d &	line,
		int &	numInt,
		OdGePoint2d &	p1,
		OdGePoint2d &	p2,
		const OdGeTol &	tol = `OdGeContext::gTol`
	)		const

Determines if the input line intersects the ellipse.

Parameters

line	[in] Input any 2D linear entity
intn	[out] Output number of intersection points
p1	[out] Output first intersection point
p2	[out] Output second intersection point
tol	[in] Output tolerance for tangent intersections

◆ inverseTangent()

void OdGeEllipArc2d::inverseTangent	(	OdGeVector2d	tan,
		OdGeDoubleArray &	params
	)		const

Returns the parameters of the points (if any) on the elliptical arc, whose tangents are parallel to the specified tangent vector.

Parameters

tan	[in] A vector defining the tangent direction.
params	[out] Receives the array of tangent point parameters.

Remarks: The parameters are appended to the specified array. You may wish to initialize the params array with clear().

◆ isCircular()

bool OdGeEllipArc2d::isCircular ( const OdGeTol & tol = OdGeContext::gTol ) const

Determines if an ellipse is a circular arc.

Parameters

tol	[in] Input tolerance

◆ isClockWise()

bool OdGeEllipArc2d::isClockWise ( ) const

Returns true if and only if this elliptical arc is drawn clockwise from start point to end point.

◆ isInside()

bool OdGeEllipArc2d::isInside	(	const OdGePoint2d &	point,
		const OdGeTol &	tol = `OdGeContext::gTol`
	)		const

Returns true if and only if the specified point lies within the full ellipse.

Parameters

point	[in] Any 2D point.
tol	[in] Geometric tolerance.

◆ majorAxis()

OdGeVector2d OdGeEllipArc2d::majorAxis ( ) const

Returns the major axis of this elliptical arc as a unit vector.

◆ majorRadius()

double OdGeEllipArc2d::majorRadius ( ) const

Returns the major radius of this elliptical arc.

◆ minorAxis()

OdGeVector2d OdGeEllipArc2d::minorAxis ( ) const

Returns the minor axis of this elliptical arc as a unit vector.

◆ minorRadius()

double OdGeEllipArc2d::minorRadius ( ) const

Returns the minor radius of this elliptical arc.

◆ operator=()

OdGeEllipArc2d& OdGeEllipArc2d::operator= ( const OdGeEllipArc2d & ell )

◆ set() [1/3]

OdGeEllipArc2d& OdGeEllipArc2d::set ( const OdGeCircArc2d & arc )

Sets the parameters for this elliptical arc according to the arguments, and returns a reference to this elliptical arc.

Parameters

arc	[in] Any 2D circular arc.

◆ set() [2/3]

OdGeEllipArc2d& OdGeEllipArc2d::set	(	const OdGePoint2d &	center,
		const OdGeVector2d &	majorAxis,
		const OdGeVector2d &	minorAxis,
		double	majorRadius,
		double	minorRadius
	)

Sets the parameters for this elliptical arc according to the arguments, and returns a reference to this elliptical arc.

Parameters

center	[in] The center of this elliptical arc.
majorAxis	[in] The major axis of this elliptical arc.
minorAxis	[in] The minor axis of this elliptical arc.
majorRadius	[in] The major radius of this elliptical arc.
minorRadius	[in] The minor radius of this elliptical arc.

◆ set() [3/3]

OdGeEllipArc2d& OdGeEllipArc2d::set	(	const OdGePoint2d &	center,
		const OdGeVector2d &	majorAxis,
		const OdGeVector2d &	minorAxis,
		double	majorRadius,
		double	minorRadius,
		double	startAng,
		double	endAng
	)

Sets the parameters for this elliptical arc according to the arguments, and returns a reference to this elliptical arc.

Parameters

center	[in] The center of this elliptical arc.
majorAxis	[in] The major axis of this elliptical arc.
minorAxis	[in] The minor axis of this elliptical arc.
majorRadius	[in] The major radius of this elliptical arc.
minorRadius	[in] The minor radius of this elliptical arc.
startAng	[in] Starting angle of this elliptical arc.
endAng	[in] Ending angle of this elliptical arc.

Remarks: All angles are expressed in radians.

◆ setAngles()

OdGeEllipArc2d& OdGeEllipArc2d::setAngles	(	double	startAng,
		double	endAng
	)

Sets the starting and ending angles of this elliptical arc.

Parameters

startAng	[in] Starting angle of this elliptical arc.
endAng	[in] Ending angle of this elliptical arc.

Remarks: All angles are expressed in radians.

◆ setAxes()

OdGeEllipArc2d& OdGeEllipArc2d::setAxes	(	const OdGeVector2d &	majorAxis,
		const OdGeVector2d &	minorAxis
	)

Sets the major and minor axes of this elliptical arc.

Parameters

majorAxis	[in] The major axis of this elliptical arc.
minorAxis	[in] The minor axis of this elliptical arc.

◆ setCenter()

OdGeEllipArc2d& OdGeEllipArc2d::setCenter ( const OdGePoint2d & center )

Sets the center of this elliptical arc.

Parameters

center [in] The center of this elliptical arc.

◆ setMajorRadius()

OdGeEllipArc2d& OdGeEllipArc2d::setMajorRadius ( double rad )

Sets the major radius of this elliptical arc.

Parameters

majorRadius [in] The major radius of this elliptical arc.

◆ setMinorRadius()

OdGeEllipArc2d& OdGeEllipArc2d::setMinorRadius ( double rad )

Sets the minor radius of this elliptical arc.

Parameters

minorRadius [in] The minor radius of this elliptical arc.

◆ startAng()

double OdGeEllipArc2d::startAng ( ) const

Returns the start angle measured from major axis of this elliptical arc.

Remarks: All angles are expressed in radians.

◆ startPoint()

OdGePoint2d OdGeEllipArc2d::startPoint ( ) const

Returns the start point of this elliptical arc.

The documentation for this class was generated from the following file:

GeEllipArc2d.h

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ OdGeEllipArc2d() [1/5]

◆ OdGeEllipArc2d() [2/5]

◆ OdGeEllipArc2d() [3/5]

◆ OdGeEllipArc2d() [4/5]

◆ OdGeEllipArc2d() [5/5]

Member Function Documentation

◆ center()

◆ endAng()

◆ endPoint()

◆ getGeomExtents()

◆ intersectWith()

◆ inverseTangent()

◆ isCircular()

◆ isClockWise()

◆ isInside()

◆ majorAxis()

◆ majorRadius()

◆ minorAxis()

◆ minorRadius()

◆ operator=()

◆ set() [1/3]

◆ set() [2/3]

◆ set() [3/3]

◆ setAngles()

◆ setAxes()

◆ setCenter()

◆ setMajorRadius()

◆ setMinorRadius()

◆ startAng()

◆ startPoint()