#include <GiConveyorGeometry.h>

Inheritance diagram for OdGiConveyorGeometry:

Public Types
enum	ETtfCharProcFlags { kTtfCharProcEnable = 1, kTtfCharProcBoundBlock = 2 }

enum	EConveyorBoundaryInfoFlags { kBoundaryProcXform = 1, kBoundaryProcXformNonUni = 2, kBoundaryProcProjection = 4, kBoundaryProcClip = 8, kBoundaryProcClipFull = 16 }

Public Member Functions
virtual	~OdGiConveyorGeometry ()

virtual void	plineProc (const OdGiPolyline &polyline, const OdGeMatrix3d *pXfm=0, OdUInt32 fromIndex=0, OdUInt32 numSegs=0)=0

virtual void	polylineProc (OdInt32 numPoints, const OdGePoint3d vertexList, const OdGeVector3d pNormal=0, const OdGeVector3d *pExtrusion=0, OdGsMarker baseSubEntMarker=-1)=0

virtual void	polygonProc (OdInt32 numPoints, const OdGePoint3d vertexList, const OdGeVector3d pNormal=0, const OdGeVector3d *pExtrusion=0)=0

virtual void	xlineProc (const OdGePoint3d &firstPoint, const OdGePoint3d &secondPoint)=0

virtual void	rayProc (const OdGePoint3d &basePoint, const OdGePoint3d &throughPoint)=0

virtual void	meshProc (OdInt32 numRows, OdInt32 numColumns, const OdGePoint3d vertexList, const OdGiEdgeData pEdgeData=0, const OdGiFaceData pFaceData=0, const OdGiVertexData pVertexData=0)=0

virtual void	shellProc (OdInt32 numVertices, const OdGePoint3d vertexList, OdInt32 faceListSize, const OdInt32 faceList, const OdGiEdgeData pEdgeData=0, const OdGiFaceData pFaceData=0, const OdGiVertexData *pVertexData=0)=0

virtual void	circleProc (const OdGePoint3d &center, double radius, const OdGeVector3d &normal, const OdGeVector3d *pExtrusion=0)=0

virtual void	circleProc (const OdGePoint3d &firstPoint, const OdGePoint3d &secondPoint, const OdGePoint3d &thirdPoint, const OdGeVector3d *pExtrusion=0)=0

virtual void	circularArcProc (const OdGePoint3d &center, double radius, const OdGeVector3d &normal, const OdGeVector3d &startVector, double sweepAngle, OdGiArcType arcType=kOdGiArcSimple, const OdGeVector3d *pExtrusion=0)=0

virtual void	circularArcProc (const OdGePoint3d &firstPoint, const OdGePoint3d &secondPoint, const OdGePoint3d &thirdPoint, OdGiArcType arcType=kOdGiArcSimple, const OdGeVector3d *pExtrusion=0)=0

virtual void	ellipArcProc (const OdGeEllipArc3d &ellipArc, const OdGePoint3d endPointOverrides=0, OdGiArcType arcType=kOdGiArcSimple, const OdGeVector3d pExtrusion=0)=0

virtual void	nurbsProc (const OdGeNurbCurve3d &nurbsCurve)=0

virtual void	textProc (const OdGePoint3d &position, const OdGeVector3d &direction, const OdGeVector3d &upVector, const OdChar msg, OdInt32 numBytes, bool raw, const OdGiTextStyle pTextStyle, const OdGeVector3d *pExtrusion=0)=0

virtual void	textProc2 (const OdGePoint3d &position, const OdGeVector3d &direction, const OdGeVector3d &upVector, const OdChar msg, OdInt32 numBytes, bool raw, const OdGiTextStyle pTextStyle, const OdGeVector3d pExtrusion=0, const OdGeExtents3d =0)

virtual void	shapeProc (const OdGePoint3d &position, const OdGeVector3d &direction, const OdGeVector3d &upVector, int shapeNumber, const OdGiTextStyle pTextStyle, const OdGeVector3d pExtrusion=0)=0

virtual void	rasterImageProc (const OdGePoint3d &origin, const OdGeVector3d &u, const OdGeVector3d &v, const OdGiRasterImage pImage, const OdGePoint2d uvBoundary, OdUInt32 numBoundPts, bool transparency=false, double brightness=50.0, double contrast=50.0, double fade=0.0)=0

virtual void	metafileProc (const OdGePoint3d &origin, const OdGeVector3d &u, const OdGeVector3d &v, const OdGiMetafile *pMetafile, bool dcAligned=true, bool allowClipping=false)=0

virtual void	xlineProc2 (const OdGePoint3d &basePoint, const OdGeVector3d &direction)

virtual void	rayProc2 (const OdGePoint3d &basePoint, const OdGeVector3d &direction)

virtual void	setExtentsProc (const OdGePoint3d *, bool=true)

virtual int	ttfCharProcFlags () const

virtual bool	ttfCharProc (OdChar, const OdGePoint3d &, const OdGeBoundBlock3d *)

virtual void	ttfPolyDrawProc (OdInt32 numVertices, const OdGePoint3d vertexList, OdInt32 faceListSize, const OdInt32 faceList, const OdUInt8 , const OdGiFaceData pFaceData=0)

virtual void	conveyorBoundaryInfoProc (const OdGeBoundBlock3d &, OdUInt32 &)

void	polypointProc2 (OdGiConveyorContext pContext, OdInt32 numPoints, const OdGePoint3d vertexList, const OdCmEntityColor pColors=0, const OdCmTransparency pTransparency=0, const OdGeVector3d pNormals=0, const OdGeVector3d pExtrusions=0, const OdGsMarker *pSubEntMarkers=0, OdInt32 nPointSize=0)

void	rowOfDotsProc2 (OdInt32 numPoints, const OdGePoint3d &startPoint, const OdGeVector3d &dirToNextPoint)

virtual void	polypointProc (OdInt32 numPoints, const OdGePoint3d vertexList, const OdCmEntityColor pColors, const OdCmTransparency pTransparency=0, const OdGeVector3d pNormals=0, const OdGeVector3d pExtrusions=0, const OdGsMarker pSubEntMarkers=0, OdInt32 nPointSize=0)=0

virtual void	rowOfDotsProc (OdInt32 numPoints, const OdGePoint3d &startPoint, const OdGeVector3d &dirToNextPoint)=0

virtual void	edgeProc (const OdGiEdge2dArray &edges, const OdGeMatrix3d *pXform=0)=0

Detailed Description

This class defines the interface through which nodes in the Teigha vectorization pipeline transfer geometric data.

See also: TD_Gi <group OdGi_Classes>

Definition at line 269 of file GiConveyorGeometry.h.

Member Enumeration Documentation

◆ EConveyorBoundaryInfoFlags

enum OdGiConveyorGeometry::EConveyorBoundaryInfoFlags

Enumerator
kBoundaryProcXform
kBoundaryProcXformNonUni
kBoundaryProcProjection
kBoundaryProcClip
kBoundaryProcClipFull

Definition at line 657 of file GiConveyorGeometry.h.

◆ ETtfCharProcFlags

enum OdGiConveyorGeometry::ETtfCharProcFlags

Enumerator
kTtfCharProcEnable
kTtfCharProcBoundBlock

Definition at line 640 of file GiConveyorGeometry.h.

Constructor & Destructor Documentation

◆ ~OdGiConveyorGeometry()

virtual OdGiConveyorGeometry::~OdGiConveyorGeometry ( )

inlinevirtual

Definition at line 272 of file GiConveyorGeometry.h.

Member Function Documentation

◆ circleProc() [1/2]

virtual void OdGiConveyorGeometry::circleProc	(	const OdGePoint3d &	center,
		double	radius,
		const OdGeVector3d &	normal,
		const OdGeVector3d *	pExtrusion = `0`
	)

pure virtual

Process circle data.

Parameters

center	[in] Center point.
radius	[in] Radius.
normal	[in] Normal vector.
pExtrusion	[in] Pointer to the extrusion vector.

Remarks: The extrusion vector specifies the direction and distance of the extrusion.

Implemented in OdGsExtAccum, OdGiGeometrySimplifier, OdGiEmptyGeometry, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ circleProc() [2/2]

virtual void OdGiConveyorGeometry::circleProc	(	const OdGePoint3d &	firstPoint,
		const OdGePoint3d &	secondPoint,
		const OdGePoint3d &	thirdPoint,
		const OdGeVector3d *	pExtrusion = `0`
	)

pure virtual

Process circle data.

Parameters

firstPoint	[in] First point of a 3-point circle.
secondPoint	[in] Second point of a 3-point circle.
thirdPoint	[in] Third point of a 3-point circle.
pExtrusion	[in] Pointer to the extrusion vector.

Remarks: If firstPoint, secondPoint, and thirdPoint are specified, they cannot be colinear and no two can be coincident.

Implemented in OdGsExtAccum, OdGiGeometrySimplifier, OdGiEmptyGeometry, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ circularArcProc() [1/2]

virtual void OdGiConveyorGeometry::circularArcProc	(	const OdGePoint3d &	center,
		double	radius,
		const OdGeVector3d &	normal,
		const OdGeVector3d &	startVector,
		double	sweepAngle,
		OdGiArcType	arcType = `kOdGiArcSimple`,
		const OdGeVector3d *	pExtrusion = `0`
	)

pure virtual

Processes circular arc data.

Parameters

center	[in] Center point.
radius	[in] Radius.
normal	[in] Normal vector.
startVector	[in] Defines the start of this arc.
sweepAngle	[in] Angle that defines the arc.
arcType	[in] Arc type.
pExtrusion	[in] Pointer to the extrusion vector.

Remarks: arcType must be one of the following:

Value Description kOdGiArcSimple 0 Unfilled. kOdGiArcSector 1 Filled area bounded by the arc and its center. kOdGiArcChord 2 Filled area bounded by the arc and its end points

The extrusion vector specifies the direction and distance of the extrusion.

Remarks: All angles are expressed in radians.

Implemented in OdGsExtAccum, OdGiGeometrySimplifier, OdGiEmptyGeometry, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ circularArcProc() [2/2]

virtual void OdGiConveyorGeometry::circularArcProc	(	const OdGePoint3d &	firstPoint,
		const OdGePoint3d &	secondPoint,
		const OdGePoint3d &	thirdPoint,
		OdGiArcType	arcType = `kOdGiArcSimple`,
		const OdGeVector3d *	pExtrusion = `0`
	)

pure virtual

Processes circular arc data.

Parameters

firstPoint	[in] First point of a 3-point arc.
secondPoint	[in] Second point of a 3-point arc.
thirdPoint	[in] Third point of a 3-point arc.
arcType	[in] Arc type.
pExtrusion	[in] Pointer to the extrusion vector.

Remarks: If firstPoint, secondPoint, and thirdPoint are specified, they cannot be colinear and no two can be coincident.

Implemented in OdGsExtAccum, OdGiGeometrySimplifier, OdGiEmptyGeometry, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ conveyorBoundaryInfoProc()

virtual void OdGiConveyorGeometry::conveyorBoundaryInfoProc	(	const OdGeBoundBlock3d &	,
		OdUInt32 &
	)

inlinevirtual

Reimplemented in OdGiConveyorPassingImpl< TThisClass, TBase >.

Definition at line 665 of file GiConveyorGeometry.h.

◆ edgeProc()

virtual void OdGiConveyorGeometry::edgeProc	(	const OdGiEdge2dArray &	edges,
		const OdGeMatrix3d *	pXform = `0`
	)

pure virtual

Processes hatch boundary.

Parameters

edges	[in] 2d curves array.
pXform	[in] Optional boundary transform matrix.

Implemented in OdGsExtAccum, OdGiGeometrySimplifier, OdGiEmptyGeometry, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ ellipArcProc()

virtual void OdGiConveyorGeometry::ellipArcProc	(	const OdGeEllipArc3d &	ellipArc,
		const OdGePoint3d *	endPointOverrides = `0`,
		OdGiArcType	arcType = `kOdGiArcSimple`,
		const OdGeVector3d *	pExtrusion = `0`
	)

pure virtual

Processes OdGeEllipArc3d data.

Parameters

ellipArc	[in] Elliptical arc.
endPointOverrides	[in] Array of points to be used as the first and last points of the vectorized arc.
arcType	[in] Arc type.
pExtrusion	[in] Pointer to the extrusion vector.

Remarks: arcType must be one of the following:

Value Description kOdGiArcSimple 0 Unfilled. kOdGiArcSector 1 Filled area bounded by the arc and its center. kOdGiArcChord 3 Filled area bounded by the arc and its end points

The extrusion vector specifies the direction and distance of the extrusion.

Implemented in OdGiEmptyGeometry, OdGsExtAccum, OdGiGeometrySimplifier, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ meshProc()

virtual void OdGiConveyorGeometry::meshProc	(	OdInt32	numRows,
		OdInt32	numColumns,
		const OdGePoint3d *	vertexList,
		const OdGiEdgeData *	pEdgeData = `0`,
		const OdGiFaceData *	pFaceData = `0`,
		const OdGiVertexData *	pVertexData = `0`
	)

pure virtual

Processes mesh data.

Parameters

numRows	[in] Number of rows.
numColumns	[in] Number of columns.
vertexList	[in] Array of vertices.
pEdgeData	[in] Pointer to additional edge data.
pFaceData	[in] Pointer to additional face data.
pVertexData	[in] Pointer to additional vertex data.

See also: OdGiEdgeData OdGiFaceData OdGiVertexData Vectorization Primitives

Implemented in OdGiEmptyGeometry, OdGsExtAccum, OdGiGeometrySimplifier, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ metafileProc()

virtual void OdGiConveyorGeometry::metafileProc	(	const OdGePoint3d &	origin,
		const OdGeVector3d &	u,
		const OdGeVector3d &	v,
		const OdGiMetafile *	pMetafile,
		bool	dcAligned = `true`,
		bool	allowClipping = `false`
	)

pure virtual

Processes metafile data.

Parameters

origin	[in] Metafile origin.
u	[in] Metafile width vector.
v	[in] Metafile height vector.
pMetafile	[in] Pointer to the metafile object.
dcAligned	[in] reserved.
allowClipping	[in] reserved.

Implemented in OdGsExtAccum, OdGiGeometrySimplifier, OdGiEmptyGeometry, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ nurbsProc()

virtual void OdGiConveyorGeometry::nurbsProc ( const OdGeNurbCurve3d & nurbsCurve )

pure virtual

Processes OdGeNurbCurve3d data.

Parameters

nurbsCurve [in] NURBS curve data.

Implemented in OdGsExtAccum, OdGiGeometrySimplifier, OdGiEmptyGeometry, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ plineProc()

virtual void OdGiConveyorGeometry::plineProc	(	const OdGiPolyline &	polyline,
		const OdGeMatrix3d *	pXfm = `0`,
		OdUInt32	fromIndex = `0`,
		OdUInt32	numSegs = `0`
	)

pure virtual

Processes OdGiPolyline data.

Parameters

polyline	[in] Polyline data to be processed.
pXfm	[in] Pointer to a transformation matrix.
fromIndex	[in] Index of the first segment to be processed.
numSegs	[in] Number of segments to be processed.

Remarks: numSegs == 0 indicates all segments starting at fromIndex are to be processed.

Implemented in OdGiEmptyGeometry, OdGsExtAccum, OdGiGeometrySimplifier, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ polygonProc()

virtual void OdGiConveyorGeometry::polygonProc	(	OdInt32	numPoints,
		const OdGePoint3d *	vertexList,
		const OdGeVector3d *	pNormal = `0`,
		const OdGeVector3d *	pExtrusion = `0`
	)

pure virtual

Processes polygon data.

Parameters

numPoints	[in] Number of points.
vertexList	[in] Array of vertices.
pNormal	[in] Pointer to the normal vector.
pExtrusion	[in] Pointer to the extrusion vector.

Remarks: The extrusion vector specifies the direction and distance of the extrusion.

Implemented in OdGsExtAccum, OdGiGeometrySimplifier, OdGiEmptyGeometry, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ polylineProc()

virtual void OdGiConveyorGeometry::polylineProc	(	OdInt32	numPoints,
		const OdGePoint3d *	vertexList,
		const OdGeVector3d *	pNormal = `0`,
		const OdGeVector3d *	pExtrusion = `0`,
		OdGsMarker	baseSubEntMarker = `-1`
	)

pure virtual

Processes simple polyline data.

Parameters

numPoints	[in] Number of points.
vertexList	[in] Array of vertices.
pNormal	[in] Pointer to the normal vector.
pExtrusion	[in] Pointer to the extrusion vector.
baseSubEntMarker	[in] Currently unused.

Remarks: The extrusion vector specifies the direction and distance of the extrusion.

Implemented in OdGsExtAccum, OdGiSectionGeometryOutput, OdGiGeometrySimplifier, OdGiEmptyGeometry, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ polypointProc()

virtual void OdGiConveyorGeometry::polypointProc	(	OdInt32	numPoints,
		const OdGePoint3d *	vertexList,
		const OdCmEntityColor *	pColors,
		const OdCmTransparency *	pTransparency = `0`,
		const OdGeVector3d *	pNormals = `0`,
		const OdGeVector3d *	pExtrusions = `0`,
		const OdGsMarker *	pSubEntMarkers = `0`,
		OdInt32	nPointSize = `0`
	)

pure virtual

Processes array of points.

Parameters

numPoints	[in] Number of points.
vertexList	[in] Array of vertices.
pNormals	[in] Array of normal vectors.
pExtrusions	[in] Array of extrusion vectors.
pSubEntMarkers	[in] Array of subentity markers.

Remarks: The extrusion vectors specifies the direction and distance of the extrusion.

Implemented in OdGsExtAccum, OdGiGeometrySimplifier, OdGiEmptyGeometry, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ polypointProc2()

void OdGiConveyorGeometry::polypointProc2	(	OdGiConveyorContext *	pContext,
		OdInt32	numPoints,
		const OdGePoint3d *	vertexList,
		const OdCmEntityColor *	pColors = `0`,
		const OdCmTransparency *	pTransparency = `0`,
		const OdGeVector3d *	pNormals = `0`,
		const OdGeVector3d *	pExtrusions = `0`,
		const OdGsMarker *	pSubEntMarkers = `0`,
		OdInt32	nPointSize = `0`
	)

inline

Definition at line 714 of file GiConveyorGeometry.h.

◆ rasterImageProc()

virtual void OdGiConveyorGeometry::rasterImageProc	(	const OdGePoint3d &	origin,
		const OdGeVector3d &	u,
		const OdGeVector3d &	v,
		const OdGiRasterImage *	pImage,
		const OdGePoint2d *	uvBoundary,
		OdUInt32	numBoundPts,
		bool	transparency = `false`,
		double	brightness = `50.0`,
		double	contrast = `50.0`,
		double	fade = `0.0`
	)

pure virtual

Processes raster images data.

Parameters

origin	[in] Lower-left corner.
u	[in] Image width vector.
v	[in] Image height vector.
pImage	[in] Pointer to the RasterImage object.
uvBoundary	[in] Array of image boundary points (may not be null).
numBoundPts	[in] Number of boundary points.
transparency	[in] True if and only if image transparency is on.
brightness	[in] Image brightness [0.0 .. 100.0].
contrast	[in] Image contrast [0.0 .. 100.0].
fade	[in] Image fade value [0.0 .. 100.0].

Implemented in OdGsExtAccum, OdGiGeometrySimplifier, OdGiEmptyGeometry, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ rayProc()

virtual void OdGiConveyorGeometry::rayProc	(	const OdGePoint3d &	basePoint,
		const OdGePoint3d &	throughPoint
	)

pure virtual

Processes Ray data.

Parameters

basePoint	[in] Base point.
throughPoint	[in] Through point

Remarks: A Ray is a semi-infinite line that starts at the basePoint, and passes through the throughPoint.

Implemented in OdGsExtAccum, OdGiGeometrySimplifier, OdGiEmptyGeometry, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ rayProc2()

virtual void OdGiConveyorGeometry::rayProc2	(	const OdGePoint3d &	basePoint,
		const OdGeVector3d &	direction
	)

inlinevirtual

Reimplemented in OdGiConveyorPassingImpl< TThisClass, TBase >.

Definition at line 633 of file GiConveyorGeometry.h.

◆ rowOfDotsProc()

virtual void OdGiConveyorGeometry::rowOfDotsProc	(	OdInt32	numPoints,
		const OdGePoint3d &	startPoint,
		const OdGeVector3d &	dirToNextPoint
	)

pure virtual

Processes row of points.

Parameters

numPoints	[in] Number of points.
startPoint	[in] First point to draw.
dirToNextPoint	[in] Offset to next point.

Implemented in OdGsExtAccum, OdGiGeometrySimplifier, OdGiEmptyGeometry, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ rowOfDotsProc2()

void OdGiConveyorGeometry::rowOfDotsProc2	(	OdInt32	numPoints,
		const OdGePoint3d &	startPoint,
		const OdGeVector3d &	dirToNextPoint
	)

inline

Definition at line 743 of file GiConveyorGeometry.h.

◆ setExtentsProc()

virtual void OdGiConveyorGeometry::setExtentsProc	(	const OdGePoint3d *	,
		bool	= `true`
	)

inlinevirtual

Reimplemented in OdGsExtAccum.

Definition at line 638 of file GiConveyorGeometry.h.

◆ shapeProc()

virtual void OdGiConveyorGeometry::shapeProc	(	const OdGePoint3d &	position,
		const OdGeVector3d &	direction,
		const OdGeVector3d &	upVector,
		int	shapeNumber,
		const OdGiTextStyle *	pTextStyle,
		const OdGeVector3d *	pExtrusion = `0`
	)

pure virtual

Processes shape data.

Parameters

position	[in] Position of the shape.
direction	[in] Baseline direction of the shape.
upVector	[in] Up vector for the shape.
shapeNumber	[in] Shape number.
pTextStyle	[in] Pointer to the TextStyle for the shape.
pExtrusion	[in] Pointer to the extrusion vector.

Remarks: The extrusion vector specifies the direction and distance of the extrusion.

Implemented in OdGsExtAccum, OdGiGeometrySimplifier, OdGiEmptyGeometry, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ shellProc()

virtual void OdGiConveyorGeometry::shellProc	(	OdInt32	numVertices,
		const OdGePoint3d *	vertexList,
		OdInt32	faceListSize,
		const OdInt32 *	faceList,
		const OdGiEdgeData *	pEdgeData = `0`,
		const OdGiFaceData *	pFaceData = `0`,
		const OdGiVertexData *	pVertexData = `0`
	)

pure virtual

Processes shell data.

Parameters

numVertices	[in] Number of vertices.
vertexList	[in] Array of vertices.
faceListSize	[in] Number of entries in faceList.
faceList	[in] Array of numbers that define the faces.
pEdgeData	[in] Pointer to additional edge data.
pFaceData	[in] Pointer to additional face data.
pVertexData	[in] Pointer to additional vertex data.

See also: Vectorization Primitives

Implemented in OdGsExtAccum, OdGiSectionGeometryOutput, OdGiGeometrySimplifier, OdGiEmptyGeometry, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ textProc()

virtual void OdGiConveyorGeometry::textProc	(	const OdGePoint3d &	position,
		const OdGeVector3d &	direction,
		const OdGeVector3d &	upVector,
		const OdChar *	msg,
		OdInt32	numBytes,
		bool	raw,
		const OdGiTextStyle *	pTextStyle,
		const OdGeVector3d *	pExtrusion = `0`
	)

pure virtual

Processes text data.

Parameters

position	[in] Position of the text.
direction	[in] Baseline direction of the text.
upVector	[in] Up vector for the text.
msg	[in] Text string.
numBytes	[in] Number of bytes in msg.
raw	[in] If and only if true, escape sequences, such as %P, will not be converted to special characters.
pTextStyle	[in] Pointer to the TextStyle for the text.
pExtrusion	[in] Pointer to the extrusion vector.

Remarks: The extrusion vector specifies the direction and distance of the extrusion.

Implemented in OdGiGeometrySimplifier, OdGiEmptyGeometry, OdGsExtAccum, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ textProc2()

virtual void OdGiConveyorGeometry::textProc2	(	const OdGePoint3d &	position,
		const OdGeVector3d &	direction,
		const OdGeVector3d &	upVector,
		const OdChar *	msg,
		OdInt32	numBytes,
		bool	raw,
		const OdGiTextStyle *	pTextStyle,
		const OdGeVector3d *	pExtrusion = `0`,
		const OdGeExtents3d *	= `0`
	)

inlinevirtual

Reimplemented in OdGiGeometrySimplifier, OdGsExtAccum, and OdGiConveyorPassingImpl< TThisClass, TBase >.

Definition at line 550 of file GiConveyorGeometry.h.

◆ ttfCharProc()

virtual bool OdGiConveyorGeometry::ttfCharProc	(	OdChar	,
		const OdGePoint3d &	,
		const OdGeBoundBlock3d *
	)

inlinevirtual

Definition at line 646 of file GiConveyorGeometry.h.

◆ ttfCharProcFlags()

virtual int OdGiConveyorGeometry::ttfCharProcFlags ( ) const

inlinevirtual

Definition at line 645 of file GiConveyorGeometry.h.

◆ ttfPolyDrawProc()

virtual void OdGiConveyorGeometry::ttfPolyDrawProc	(	OdInt32	numVertices,
		const OdGePoint3d *	vertexList,
		OdInt32	faceListSize,
		const OdInt32 *	faceList,
		const OdUInt8 *	,
		const OdGiFaceData *	pFaceData = `0`
	)

inlinevirtual

Reimplemented in OdGiGeometrySimplifier, and OdGiConveyorPassingImpl< TThisClass, TBase >.

Definition at line 649 of file GiConveyorGeometry.h.

◆ xlineProc()

virtual void OdGiConveyorGeometry::xlineProc	(	const OdGePoint3d &	firstPoint,
		const OdGePoint3d &	secondPoint
	)

pure virtual

Processes Xline data.

Parameters

firstPoint	[in] First point.
secondPoint	[in] Second point.

Remarks: An Xline is an infinite line passing through the specified points.

Implemented in OdGsExtAccum, OdGiGeometrySimplifier, OdGiEmptyGeometry, and OdGiConveyorPassingImpl< TThisClass, TBase >.

◆ xlineProc2()

virtual void OdGiConveyorGeometry::xlineProc2	(	const OdGePoint3d &	basePoint,
		const OdGeVector3d &	direction
	)

inlinevirtual

Reimplemented in OdGiConveyorPassingImpl< TThisClass, TBase >.

Definition at line 629 of file GiConveyorGeometry.h.

The documentation for this class was generated from the following file:

GiConveyorGeometry.h

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

◆ EConveyorBoundaryInfoFlags

◆ ETtfCharProcFlags

Constructor & Destructor Documentation

◆ ~OdGiConveyorGeometry()

Member Function Documentation

◆ circleProc() [1/2]

◆ circleProc() [2/2]

◆ circularArcProc() [1/2]

◆ circularArcProc() [2/2]

◆ conveyorBoundaryInfoProc()

◆ edgeProc()

◆ ellipArcProc()

◆ meshProc()

◆ metafileProc()

◆ nurbsProc()

◆ plineProc()

◆ polygonProc()

◆ polylineProc()

◆ polypointProc()

◆ polypointProc2()

◆ rasterImageProc()

◆ rayProc()

◆ rayProc2()

◆ rowOfDotsProc()

◆ rowOfDotsProc2()

◆ setExtentsProc()

◆ shapeProc()

◆ shellProc()

◆ textProc()

◆ textProc2()

◆ ttfCharProc()

◆ ttfCharProcFlags()

◆ ttfPolyDrawProc()

◆ xlineProc()

◆ xlineProc2()