#include <GiBaseVectorizerImpl.h>
Protected Types | |
| enum | Flags { kFillPlaneSet = OdGiBaseVectorizer::kLastFlag << 1 , kLinetypeContinuous = OdGiBaseVectorizer::kLastFlag << 2 , kModelCache = OdGiBaseVectorizer::kLastFlag << 3 , kHighlighted = OdGiBaseVectorizer::kLastFlag << 4 , kDontAbortRegen = OdGiBaseVectorizer::kLastFlag << 5 , kCheckLinePattern = OdGiBaseVectorizer::kLastFlag << 6 , kBreakSelection = OdGiBaseVectorizer::kLastFlag << 7 , kSuppressOutput = OdGiBaseVectorizer::kLastFlag << 8 , kSelectionGeometry = OdGiBaseVectorizer::kLastFlag << 9 , kSelectionDisabled = OdGiBaseVectorizer::kLastFlag << 10 , kObjectToDeviceValid = OdGiBaseVectorizer::kLastFlag << 11 , kDisableInfiniteGeomExtents = OdGiBaseVectorizer::kLastFlag << 12 , kSectionableGeomExtentsOnly = OdGiBaseVectorizer::kLastFlag << 13 , kDisableSection = OdGiBaseVectorizer::kLastFlag << 14 , kSectionForegroundGeometry = OdGiBaseVectorizer::kLastFlag << 15 , kInitGsState = OdGiBaseVectorizer::kLastFlag << 16 , kSetVpLtypeScaleMult = OdGiBaseVectorizer::kLastFlag << 17 , kSetVpFilterFunction = OdGiBaseVectorizer::kLastFlag << 18 , kLineweightOverride = OdGiBaseVectorizer::kLastFlag << 19 , kLinestyleOverride = OdGiBaseVectorizer::kLastFlag << 20 , kLastOptionFlag = kLinestyleOverride } |
| enum | ImplFlags { kFirstImplFlag = 1 , kSectionableGeomEnabled = kFirstImplFlag << 0 , kLastImplFlag = kSectionableGeomEnabled } |
 Protected Types inherited from OdGiBaseVectorizer | |
| enum | Flags { kFirstFlag = 1 , kSuppressViewportDraw = kFirstFlag << 0 , kDrawInvisibleEnts = kFirstFlag << 1 , kDrawLayerOff = kFirstFlag << 2 , kDrawLayerFrozen = kFirstFlag << 3 , kIgnoreFillPlane = kFirstFlag << 4 , kSelectionMode = kFirstFlag << 5 , kAttributesSegment = kFirstFlag << 6 , kXrefOverride = kFirstFlag << 7 , kLastFlag = kXrefOverride } |
| typedef OdGiTraitsCache< OdGiMaterialTraitsData, OdGiMaterialTraitsTaker, OdGiMaterialTraits::kByBlock|OdGiMaterialTraits::kByLayer > | OdGiMaterialTraitsCache |
Additional Inherited Members | |
| Public Types inherited from OdGiSubEntityTraits | |
| enum | DrawFlags { kNoDrawFlags = 0x0000 , kDrawBackfaces = 0x0001 , kDrawHatchGroup = 0x0002 , kDrawFrontfacesOnly = 0x0004 , kDrawGradientFill = 0x0008 , kDrawSolidFill = 0x0010 , kDrawNoLineWeight = 0x0020 , kDrawNoPlotstyle = 0x0080 , kDrawContourFill = 0x08000 , kDisableLayoutCache = 0x10000 , kDrawBoundaryForClipping = 0x20000 , kDrawBoundaryForClippingDrw = 0x40000 , kClipSetIsEmpty = 0x80000 , kInternalDrawFlags = kDisableLayoutCache | kClipSetIsEmpty , kDrawPolygonFill = 0x100000 , kExcludeFromViewExt = 0x200000 , kDrawDgLsPolyWithoutBreaks = 0x400000 , kPolygonProcessing = 0x800000 , kDisableAutoGenerateNormals = 0x1000000 , kDisableFillModeCheck = 0x2000000 , kDrawUnderlayReference = 0x4000000 , kFxNoFillOnSelect = 0x08000000 , kInheritableDrawFlags } |
| enum | ShadowFlags { kShadowsCastAndReceive = 0 , kShadowsDoesNotCast = 1 , kShadowsDoesNotReceive = 2 , kShadowsIgnore = kShadowsDoesNotCast | kShadowsDoesNotReceive } |
| enum | SelectionFlags { kNoSelectionFlags = 0 , kSelectionIgnore = 1 , kHighlightingGeometry = 2 , kFxSubentitySelection = 0x80 } |
| enum | SubEntityHints { kHint2DAttributes = 1 , kHint3DAttributes = 2 , kHintAllAttributes = kHint2DAttributes | kHint3DAttributes , kHintSnapModeOn = 4 , kHintDefaultState = kHintAllAttributes } |
| Public Types inherited from OdGiConveyorContext | |
| enum | ConveyorContextFlags { kSpatialFilterSimplPline = 1 , kSpatialFilterSimplNurbs = 2 , kSpatialFilterSimplText = 4 , kSpatialFilterSimplShape = 8 , kSpatialFilterSimplAll , kEmbranchmentSimplText = 16 , kEmbranchmentSimplNurbs = 32 , kEmbranchmentSimplAll = (kEmbranchmentSimplText | kEmbranchmentSimplNurbs) , kConveyorSimplAll = (kSpatialFilterSimplAll | kEmbranchmentSimplAll) , kPlineMarkers = 64 , kForceMarkersOnModified = 128 , kPolylineMarkers = 256 , kPlineAllowArcProc = 512 , kTestMode = 1024 , kLineTyperAfterMetafile = 2048 } |
| Public Types inherited from OdGiSubEntityTraitsChangedFlags | |
| enum | ChangedTraits { kFirstChangedFlag = 1 , kColorChanged = kFirstChangedFlag << 0 , kLayerChanged = kFirstChangedFlag << 1 , kLineTypeChanged = kFirstChangedFlag << 2 , kFillTypeChanged = kFirstChangedFlag << 3 , kLineWeightChanged = kFirstChangedFlag << 4 , kLineTypeScaleChanged = kFirstChangedFlag << 5 , kThicknessChanged = kFirstChangedFlag << 6 , kPlotStyleChanged = kFirstChangedFlag << 7 , kMaterialChanged = kFirstChangedFlag << 8 , kMapperChanged = kFirstChangedFlag << 9 , kVisualStyleChanged = kFirstChangedFlag << 10 , kTransparencyChanged = kFirstChangedFlag << 11 , kDrawFlagsChanged = kFirstChangedFlag << 12 , kSelectionGeomChanged = kFirstChangedFlag << 13 , kShadowFlagsChanged = kFirstChangedFlag << 14 , kSectionableChanged = kFirstChangedFlag << 15 , kSelectionFlagsChanged = kFirstChangedFlag << 16 , kSecColorChanged = kFirstChangedFlag << 17 , kLSModifiersChanged = kFirstChangedFlag << 18 , kFillChanged = kFirstChangedFlag << 19 , kAwareFlagChanged = kFirstChangedFlag << 20 , kAllChanged = 0x1FFFFF , kSomeChanged = kAllChanged } |
| Static Public Member Functions inherited from OdRxObject | |
| static OdRxObjectPtr | cast (const OdRxObject *pointer) |
| static OdRxClass * | desc () |
| Static Public Member Functions inherited from OdGiWorldDrawImpl | |
| static OdGiContext * | dummyGiContext () |
| Public Attributes inherited from OdGiBaseVectorizer | |
| OdGiDrawableDesc * | m_pDrawableDesc |
| OdUInt32 | m_nDrawableAttributes |
| Static Protected Member Functions inherited from OdGiBaseVectorizer | |
| static OdRxClass * | desc () |
| Static Protected Attributes inherited from OdGiBaseVectorizer | |
| static ODGI_EXPORT_STATIC const OdGiSubEntityTraitsData | g_entityTraitsDataReset |
Detailed Description
Corresponding C++ library: TD_Gs
<group OdGs_Classes>
Definition at line 49 of file GiBaseVectorizerImpl.h.
Member Enumeration Documentation
◆ Flags
|
protected |
Definition at line 367 of file GiBaseVectorizerImpl.h.
◆ ImplFlags
|
protected |
| Enumerator | |
|---|---|
| kFirstImplFlag | |
| kSectionableGeomEnabled | |
| kLastImplFlag | |
Definition at line 393 of file GiBaseVectorizerImpl.h.
Constructor & Destructor Documentation
◆ OdGiBaseVectorizerImpl()
| OdGiBaseVectorizerImpl::OdGiBaseVectorizerImpl | ( | ) |
Member Function Documentation
◆ acadWindowId()
|
virtual |
Returns the ID for this Viewport object..
- Remarks
- The value returned corresponds to the CVPORT system variable.
Implements OdGiViewport.
◆ affectTraits()
|
protectedvirtual |
OdGiBaseVectorizer methods *
Reimplemented from OdGiBaseVectorizer.
◆ annotationScale()
|
virtual |
Returns current annotationScale value of conveyor context.
Reimplemented from OdGiConveyorContext.
◆ awareFlags() [1/2]
|
inline |
Returns the Aware flags for portion of geometry that had been vectorized since last call resetAwareFlags().
- Remarks
- awareFlags() returns a combination of zero or more of the following:
Value Geometry_depends_on kVpID 0x00000001 viewport Id (OdGiViewport::viewportId()). kVpRegenType 0x00000002 regeneration type (OdGiCommonDraw::regenType()). kVpRenderMode 0x00000004 render mode (OdGsView::mode()). kVpWorldToEye 0x00000008 description to come... kVpPerspective 0x00000010 description to come... kVpResolution 0x00000020 description to come... kVpMaxDevForCircle 0x00000040 description to come... kVpMaxDevForCurve 0x00000080 description to come... kVpMaxDevForBoundary 0x00000100 description to come... kVpMaxDevForIsoline 0x00000200 description to come... kVpMaxDevForFacet 0x00000400 description to come... kVpCamLocation 0x00000800 description to come... kVpCamTarget 0x00001000 description to come... kVpCamUpVector 0x00002000 description to come... kVpCamViewDir 0x00004000 description to come... kVpViewport 0x00008000 description to come... kVpFrontBack 0x00010000 description to come... kVpFrozenLayers 0x00020000 description to come... kVpLtypeScaleMult 0x00040000 description to come... kEntityRegenDraw 0x00080000 description to come... kVpDisableLayoutCache 0x00100000 description to come... kVpModelTf 0x00200000 description to come... kVpExcludeFromExtMinMax 0x00400000 description to come... kSectionable 0x00800000 description to come... kVpRenderModule 0x01000000 description to come... kVpAnnoScale 0x02000000 description to come... kVpFilterFunction 0x04000000 description to come... kVpVisualStyle 0x08000000 description to come... kVpHighlightingGeom 0x10000000 description to come...
- See also
resetAwareFlags
Definition at line 154 of file GiBaseVectorizerImpl.h.
◆ awareFlags() [2/2]
|
inline |
Returns the Aware flags for portion of geometry that had been vectorized since last call resetAwareFlags().
- Remarks
- awareFlags() returns a combination of zero or more of the following:
Value Geometry_depends_on kVpID 0x00000001 viewport Id (OdGiViewport::viewportId()). kVpRegenType 0x00000002 regeneration type (OdGiCommonDraw::regenType()). kVpRenderMode 0x00000004 render mode (OdGsView::mode()). kVpWorldToEye 0x00000008 description to come... kVpPerspective 0x00000010 description to come... kVpResolution 0x00000020 description to come... kVpMaxDevForCircle 0x00000040 description to come... kVpMaxDevForCurve 0x00000080 description to come... kVpMaxDevForBoundary 0x00000100 description to come... kVpMaxDevForIsoline 0x00000200 description to come... kVpMaxDevForFacet 0x00000400 description to come... kVpCamLocation 0x00000800 description to come... kVpCamTarget 0x00001000 description to come... kVpCamUpVector 0x00002000 description to come... kVpCamViewDir 0x00004000 description to come... kVpViewport 0x00008000 description to come... kVpFrontBack 0x00010000 description to come... kVpFrozenLayers 0x00020000 description to come... kVpLtypeScaleMult 0x00040000 description to come... kEntityRegenDraw 0x00080000 description to come... kVpDisableLayoutCache 0x00100000 description to come... kVpModelTf 0x00200000 description to come... kVpExcludeFromExtMinMax 0x00400000 description to come... kSectionable 0x00800000 description to come... kVpRenderModule 0x01000000 description to come... kVpAnnoScale 0x02000000 description to come... kVpFilterFunction 0x04000000 description to come... kVpVisualStyle 0x08000000 description to come... kVpHighlightingGeom 0x10000000 description to come...
- See also
resetAwareFlags
Definition at line 108 of file GiBaseVectorizerImpl.h.
◆ beginViewVectorization()
|
virtual |
OdGiBaseVectorizer methods *
Reimplemented from OdGiBaseVectorizer.
Reimplemented in OdGsBaseVectorizer, and OdGsBaseMaterialVectorizer.
◆ clearLinetypeCache()
| void OdGiBaseVectorizerImpl::clearLinetypeCache | ( | ) |
◆ contextualColors()
|
virtual |
Returns pointer to context-dependent colors storage.
- Remarks
- This pointer could be null if contextual colors doesn't specified by context.
Reimplemented from OdGiViewport.
◆ currentLineweightOverride()
|
inlinevirtual |
Returns current lineweight override (if present).
Reimplemented from OdGiConveyorContext.
Definition at line 616 of file GiBaseVectorizerImpl.h.
◆ deviation()
|
virtual |
OdGiCommonDraw methods *
Reimplemented from OdGiBaseVectorizer.
◆ doInversePerspective()
|
virtual |
Applies the inverse of the current perspective transformation to the specified point.
- Parameters
-
point [in/out] Any 3D point.
- Remarks
- The point is transformed from normalized device coordinates to EyeSpace coordinates
Returns true if and only if the point was transformed; i.e., a perspective transform is active, and the point was neither too close or behind the camera.
- See also
- Coordinate Systems
Implements OdGiViewport.
◆ doPerspective()
|
virtual |
Applies the current perspective transformation to the specified point.
- Parameters
-
point [in/out] Any 3D point.
- Remarks
- The point is transformed from EyeSpace coordinates to normalized device coordinates.
Returns true if and only if the point was transformed; i.e., a perspective transform is active, and the point was neither too close or behind the camera.
- See also
- Coordinate Systems
Implements OdGiViewport.
◆ effectivePlotStyle()
| const OdPsPlotStyleData& OdGiBaseVectorizerImpl::effectivePlotStyle | ( | ) | const |
Returns the effective plot style for this vectorizer object.
◆ endViewVectorization()
|
virtual |
Ends the ViewVectorization process for this Vectorizer object.
Reimplemented from OdGiBaseVectorizer.
Reimplemented in OdGsBaseVectorizer, and OdGsBaseMaterialVectorizer.
◆ getCameraLocation()
|
virtual |
Returns the WCS camera (eye) location for this Viewport object.
Implements OdGiViewport.
◆ getCameraTarget()
|
virtual |
Returns the WCS camera target for this Viewport object.
Implements OdGiViewport.
◆ getCameraUpVector()
|
virtual |
Returns the WCS camera "up" vector for this Viewport object.
Implements OdGiViewport.
◆ getEyeToModelTransform()
|
virtual |
Returns the transformation matrix from EyeSpace to ModelSpace for this Viewport object.
- See also
- Coordinate Systems
Implements OdGiViewport.
◆ getEyeToWorldTransform()
|
virtual |
Returns the transformation matrix from EyeSpace to WCS for this Viewport object.
- See also
- Coordinate Systems
Implements OdGiViewport.
◆ getFrontAndBackClipValues()
|
virtual |
Returns the front and back clipping parameters for this Viewport object.
- Parameters
-
clipFront [out] Receives true if and only if front clipping is enabled. clipBack [out] Receives true if and only if back clipping is enabled. front [out] Receives the front clipping distance. back [out] Receives the back clipping distance.
- Remarks
- Returns clipFront || clipBack.
front and back are the eye coordinate Z values.
Clipping planes are perpendicular to the view direction.
If the front clipping plane is enabled, geometry in front of it is not displayed.
If the back clipping plane is enabled, geometry in back of it is not displayed.
Implements OdGiViewport.
◆ getModelToEyeTransform()
|
virtual |
OdGiViewport methods *
Implements OdGiViewport.
◆ getModelToWorldTransform()
|
virtual |
Returns the model-to-world coordinate transform matrix for the entity being vectorized.
- Remarks
- This is the inverse of the matrix returned by getWorldToModelTransform().
If an entity is in one or more blocks, this matrix can be used to determine the WCS coordinates of the entity.
Reimplemented from OdGiBaseVectorizer.
◆ getNumPixelsInUnitSquare()
|
virtual |
Returns the display pixel density at the specified point for this Viewport object.
- Parameters
-
point [in] WCS center of the unit square. pixelDensity [out] Receives the pixel density. bUsePerspective [in] Enable perspective inclusion into pixel density calculation.
- Remarks
- Pixel density is measured in pixels per WCS unit.
This function can be used to determine if the geometry generated for an object will be smaller than the size of a pixel.
Implements OdGiViewport.
◆ getRenderMode()
| OdGsView::RenderMode OdGiBaseVectorizerImpl::getRenderMode | ( | ) | const |
◆ getViewportDcCorners()
|
virtual |
Returns lower-left and upper-right corners of this Viewport object in normalized device Coordinates.
- Parameters
-
lowerLeft [out] Receives the lower-left corner. upperRight [out] Receives the upper-right.
- Remarks
- This information lets position items that are fixed in size and/or position with respect to a Viewport.
- See also
- Coordinate Systems
Implements OdGiViewport.
◆ getWorldToEyeTransform()
|
virtual |
Returns the transformation matrix from WCS to EyeSpace for this Viewport object.
- See also
- Coordinate Systems
Implements OdGiViewport.
◆ getWorldToModelTransform()
|
virtual |
Returns the world-to-model coordinate transform matrix for the entity being vectorized.
- Remarks
- This is the inverse of the matrix returned by getModelToWorldTransform().
Reimplemented from OdGiBaseVectorizer.
◆ giViewport()
|
virtual |
OdGiConveyorContext methods *
Reimplemented from OdGiBaseVectorizer.
◆ gsView()
|
virtual |
Returns the OdGsView associated with this ConveyorContext object.
Reimplemented from OdGiBaseVectorizer.
◆ hasLinestyleOverride()
|
inline |
Definition at line 628 of file GiBaseVectorizerImpl.h.
◆ hasLineweightOverride()
|
inline |
Definition at line 623 of file GiBaseVectorizerImpl.h.
◆ isEffectiveLinetypeContinuous()
|
protected |
Returns true if and this if the effective linetype generation is continuous for vectorizer object.
◆ isLinetypesEnabled()
|
inline |
Definition at line 587 of file GiBaseVectorizerImpl.h.
◆ isOutputSuppressed()
|
inlineprotected |
Definition at line 576 of file GiBaseVectorizerImpl.h.
◆ isPerspective()
|
virtual |
Returns true if and only if perspective mode is on for this Viewport.
Implements OdGiViewport.
◆ isSupportPlotStyles()
|
inlineprotected |
Definition at line 592 of file GiBaseVectorizerImpl.h.
◆ isValidId()
|
virtual |
- Remarks
- The default implementation of this function always returns false.
Reimplemented from OdGiBaseVectorizer.
◆ layerVisible()
|
virtual |
Reimplemented from OdGiBaseVectorizer.
◆ linetypeGenerationCriteria()
|
virtual |
Returns the dash length below which linetypes are not generated by this Vectorizer object.
Reimplemented from OdGiBaseVectorizer.
◆ linetypeScaleMultiplier()
|
virtual |
Returns a multiplier that is used to scale all linetypes in this Viewport object.
Implements OdGiViewport.
◆ lineweightToPixels() [1/2]
|
inline |
Returns the number of pixels corresponding to the specified lineweight for this view object.
- Parameters
-
lineweight [in] Lineweight.
Definition at line 604 of file GiBaseVectorizerImpl.h.
◆ lineweightToPixels() [2/2]
|
inline |
Returns the number of pixels corresponding to the specified lineweight for this view object.
- Parameters
-
lineweight [in] Lineweight.
Definition at line 597 of file GiBaseVectorizerImpl.h.
◆ lineweightToPixelsOverride() [1/2]
|
protected |
◆ lineweightToPixelsOverride() [2/2]
|
inlineprotected |
Definition at line 611 of file GiBaseVectorizerImpl.h.
◆ lineweightToPixelsOverrideInt()
|
protected |
◆ liveSection()
|
inline |
Definition at line 189 of file GiBaseVectorizerImpl.h.
◆ mesh()
|
virtual |
Introduces a mesh into this vectorization context.
- Parameters
-
numRows [in] Number of rows. numColumns [in] Number of columns. vertexList [in] Array of vertices. pEdgeData [in] Pointer to additional edge data. pFaceData [in] Pointer to additional face data. pVertexData [in] Pointer to additional vertex data.
- Remarks
- A mesh is a surface defined by a grid of vertices, and corresponds to a Polygon Mesh. By default, a mesh takes on the current color. Color, linetype, and and other properties can be controlled supplying the appropriate data for the pEdgeData, pFaceData, and pVertexData arguments.
- vertexList must have numRows × numColumns elements. The arrays in *pEdgeData must be NULL or contain (numRows - 1) × numColumns + numRows × (numColumns -1) elements. The arrays in *pFaceData must be NULL or contain (numRows - 1) × (numColumns - 1) elements. The arrays in *pVertexData must be NULL or contain numRows × numColumns elements.
Reimplemented from OdGiBaseVectorizer.
◆ modelToWorldTransform()
| OdGeMatrix3d OdGiBaseVectorizerImpl::modelToWorldTransform | ( | ) | const |
◆ objectToDeviceMatrix()
|
virtual |
◆ ODRX_USING_HEAP_OPERATORS()
|
protected |
◆ onTraitsModified()
|
virtual |
Notification function called by the vectorization framework whenever the rendering attributes have changed.
- Remarks
- This function is called before sending any geometry through the geometry conveyor.
This function provides a hook for setting rendering attributes for the final geometry handler (e.g. Win GDI device).
Reimplemented from OdGiBaseVectorizer.
Reimplemented in OdGsBaseVectorizer, and OdGsBaseMaterialVectorizer.
◆ popLineweightOverride()
|
virtual |
Pop lineweight scale and style override from lineweight overrides stack.
Reimplemented from OdGiSubEntityTraits.
◆ popModelTransform()
|
virtual |
Removes the top transformation off the current transformation stack.
Reimplemented from OdGiBaseVectorizer.
Reimplemented in OdGsBaseVectorizer.
◆ pushLineweightOverride()
|
virtual |
Push lineweight scale and style override into lineweight overrides stack.
- Parameters
-
pOverride [in] New lineweight override.
- Returns
- Returns true in case if lineweight overrides supported by underlying vectorization pipeline.
Reimplemented from OdGiSubEntityTraits.
◆ pushModelTransform() [1/2]
|
virtual |
Specifies a model transformation matrix for the current transformation stack.
- Remarks
- The specified transformation is concatenated to the current model transformation (which is initially the identity transform). The resulting model transformation is subsequently applied to all geometry introduced into this vectorization context, until popModelTransform() is called.
- Parameters
-
xfm [in] Transformation matrix.
Reimplemented from OdGiBaseVectorizer.
Reimplemented in OdGsBaseVectorizer.
◆ pushModelTransform() [2/2]
|
virtual |
◆ ray()
|
virtual |
Introduces a Ray into this vectorization context.
- Remarks
- A Ray is a semi-infinite line that starts at the basePoint, and passes through the throughPoint.
The ray takes on the current color.
- Parameters
-
basePoint [in] Base point. throughPoint [in] Through point
Reimplemented from OdGiBaseVectorizer.
◆ regenType()
|
virtual |
Returns the regeneration type of the current vectorization process.
- Remarks
- regenType() returns one of the following:
Value eOdGiRegenTypeInvalid 0 kOdGiStandardDisplay 2 kOdGiHideOrShadeCommand 3 kOdGiRenderCommand 4 kOdGiForExplode 5 kOdGiSaveWorldDrawForProxy 6 kOdGiForExtents 7
Reimplemented from OdGiBaseVectorizer.
◆ resetAwareFlags()
|
inline |
◆ sequenceNumber()
|
virtual |
OdGiViewportDraw methods *
Reimplemented from OdGiBaseVectorizer.
◆ setExtents()
|
virtual |
OdGiWorldGeometry methods *
Reimplemented from OdGiBaseVectorizer.
◆ setFillPlane()
|
virtual |
OdGiSubEntityTraits methods *
Reimplemented from OdGiSubEntityTraits.
◆ setFillType()
|
virtual |
Sets the current fill type.
- Parameters
-
fillType [in] Fill type.
- Remarks
- fillType must be one of the following:
Value Description kOdGiFillAlways 1 Fill closed graphic primitives. kOdGiFillNever 2 Don't fill closed graphic primitives.
Closed graphic primitives consist of the following: arcs with (OdGiArcType == kOdGiArcSector) || (OdGiArcType == kOdGiArcChord) circles meshes polygons shells
Reimplemented from OdGiBaseVectorizer.
◆ setLinetypesEnabled()
|
inline |
Definition at line 581 of file GiBaseVectorizerImpl.h.
◆ setModelSection()
| void OdGiBaseVectorizerImpl::setModelSection | ( | OdGiDrawable * | pSection, |
| bool | bUseSectionGeometryMap | ||
| ) |
◆ setUp()
|
virtual |
This method is to be called when setting up the vectorizer to work on the given view.
Reimplemented in OdGsBaseVectorizer.
◆ setupForEntity()
|
virtual |
Returns the set of SubEntityHints flags which can be used to provide more flexible tuning of subSetAttributes traits processing.
Reimplemented from OdGiSubEntityTraits.
◆ shell()
|
virtual |
Introduces a shell into this vectorization context.
- Parameters
-
numVertices [in] Number of vertices. vertexList [in] Array of vertices. faceListSize [in] Number of entries in facesList. faceList [in] Array of integers defining faces. pEdgeData [in] Pointer to additional edge data. pFaceData [in] Pointer to additional face data. pVertexData [in] Pointer to additional vertex data.
- Remarks
- A shell is a set of faces that can contain holes, and corresponds to a Polyface mesh.
By default, a mesh takes on the current color. Color, linetype, and and other properties can be controlled supplying the appropriate data for the pEdgeData, pFaceData, and pVertexData arguments.
- Remarks
- The arrays in *pEdgeData must be NULL or contain the same number of elements as there are edges. The arrays in *pFaceData must be NULL or contain the same number of elements as there are faces. The arrays in *pVertexData must be NULL or contain numVertices elements.
- See also
- Faces
Reimplemented from OdGiBaseVectorizer.
◆ updateLineweightOverride()
|
protectedvirtual |
◆ useFillPlane()
|
protected |
Returns true if and only if this VectorizeView object is configured to use a fill plane.
◆ view()
|
inline |
Definition at line 63 of file GiBaseVectorizerImpl.h.
◆ viewDir()
|
virtual |
Returns the vector from the camera target to the camera location.
Implements OdGiViewport.
◆ viewport()
|
virtual |
Returns a reference to the OdGiViewport object associated with this object.
- Remarks
- The OdGiViewport contains information specific to the viewport being drawn.
Reimplemented from OdGiBaseVectorizer.
◆ viewportId()
|
virtual |
Returns the OdGi Viewport ID for this Viewport object.
- Remarks
- The value returned has no relationshp to the CVPORT system variable.
Implements OdGiViewport.
◆ viewportObjectId()
|
virtual |
- Remarks
- The default implementation of this function always returns 0.
Reimplemented from OdGiBaseVectorizer.
◆ worldToModelTransform()
| OdGeMatrix3d OdGiBaseVectorizerImpl::worldToModelTransform | ( | ) | const |
◆ xline()
|
virtual |
Introduces an Xline into this vectorization context.
- Remarks
- Xlines are infinite lines passing through two points.
The xline takes on the current color.
- Parameters
-
firstPoint [in] First point. secondPoint [in] Second point.
Reimplemented from OdGiBaseVectorizer.
Member Data Documentation
◆ m_fillPlane
|
protected |
Definition at line 339 of file GiBaseVectorizerImpl.h.
◆ m_implFlags
|
protected |
Definition at line 338 of file GiBaseVectorizerImpl.h.
◆ m_liveSection
|
protected |
Definition at line 348 of file GiBaseVectorizerImpl.h.
◆ m_nAwareFlags
|
mutableprotected |
Definition at line 337 of file GiBaseVectorizerImpl.h.
◆ m_objectToDeviceMatrix
|
mutableprotected |
Definition at line 365 of file GiBaseVectorizerImpl.h.
◆ m_pGsReserved
|
protected |
Definition at line 347 of file GiBaseVectorizerImpl.h.
◆ m_pLinetyper
|
protected |
Definition at line 345 of file GiBaseVectorizerImpl.h.
◆ m_plotStyle
|
mutableprotected |
Definition at line 341 of file GiBaseVectorizerImpl.h.
◆ m_pOutputBranch
|
protected |
Definition at line 346 of file GiBaseVectorizerImpl.h.
◆ m_pstype
|
protected |
Definition at line 340 of file GiBaseVectorizerImpl.h.
◆ m_pXlineNRayClipper
|
protected |
Definition at line 343 of file GiBaseVectorizerImpl.h.
◆ m_pXToLtp
|
protected |
Definition at line 353 of file GiBaseVectorizerImpl.h.
◆ m_sectForegroundEdge
|
protected |
Definition at line 351 of file GiBaseVectorizerImpl.h.
◆ m_sectForegroundFace
|
protected |
Definition at line 350 of file GiBaseVectorizerImpl.h.
◆ m_sectionGeometryMap
|
protected |
Definition at line 349 of file GiBaseVectorizerImpl.h.
◆ m_setAttributesHints
|
protected |
Definition at line 342 of file GiBaseVectorizerImpl.h.
◆ m_xlineNRayEntryPoint
|
protected |
Definition at line 344 of file GiBaseVectorizerImpl.h.
The documentation for this class was generated from the following file: