#include <GeBoundedPlane.h>

Inheritance diagram for OdGeBoundedPlane:

Public Member Functions
	OdGeBoundedPlane ()

	OdGeBoundedPlane (const OdGeBoundedPlane &plane)

	OdGeBoundedPlane (const OdGePoint3d &origin, const OdGeVector3d &uAxis, const OdGeVector3d &vAxis)

	OdGeBoundedPlane (const OdGePoint3d &uPnt, const OdGePoint3d &origin, const OdGePoint3d &vPnt)

	TD_USING (OdGePlanarEnt::intersectWith)

bool	intersectWith (const OdGePlane &plane, OdGeLineSeg3d &intLine, const OdGeTol &tol=OdGeContext::gTol) const

bool	intersectWith (const OdGeBoundedPlane &plane, OdGeLineSeg3d &intLine, const OdGeTol &tol=OdGeContext::gTol) const

OdGeBoundedPlane &	set (const OdGePoint3d &origin, const OdGeVector3d &uAxis, const OdGeVector3d &vAxis)

OdGeBoundedPlane &	set (const OdGePoint3d &uPnt, const OdGePoint3d &origin, const OdGePoint3d &vPnt)

OdGeBoundedPlane &	operator= (const OdGeBoundedPlane &plane)

Public Member Functions inherited from OdGePlanarEnt
bool	isOnPlane (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

bool	intersectWith (const OdGeLinearEnt3d &line, OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	closestPointToLinearEnt (const OdGeLinearEnt3d &line, OdGePoint3d &pointOnLine, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	closestPointToPlanarEnt (const OdGePlanarEnt &plane, OdGePoint3d &pointOnOtherPlane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isParallelTo (const OdGeLinearEnt3d &line, const OdGeTol &tol=OdGeContext::gTol) const

bool	isParallelTo (const OdGePlanarEnt &plane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isPerpendicularTo (const OdGeLinearEnt3d &line, const OdGeTol &tol=OdGeContext::gTol) const

bool	isPerpendicularTo (const OdGePlanarEnt &plane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isCoplanarTo (const OdGePlanarEnt &plane, const OdGeTol &tol=OdGeContext::gTol) const

void	get (OdGePoint3d &origin, OdGeVector3d &uAxis, OdGeVector3d &vAxis) const

void	get (OdGePoint3d &uPnt, OdGePoint3d &origin, OdGePoint3d &vPnt) const

OdGePoint3d	pointOnPlane () const

OdGeVector3d	normal () const

void	getCoefficients (double &a, double &b, double &c, double &d) const

void	getCoordSystem (OdGePoint3d &origin, OdGeVector3d &axis1, OdGeVector3d &axis2) const

OdGePlanarEnt &	operator= (const OdGePlanarEnt &plane)

	TD_USING (OdGeSurface::project)

bool	project (const OdGePoint3d &p, const OdGeVector3d &unitDir, OdGePoint3d &projP, const OdGeTol &tol=OdGeContext::gTol) const

Public Member Functions inherited from OdGeSurface
OdGePoint2d	paramOf (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint2d	paramOf (const OdGePoint3d &point, const OdGeUvBox *uvBox, const OdGeTol &tol=OdGeContext::gTol) const

	TD_USING (OdGeEntity3d::isOn)

bool	isOn (const OdGePoint3d &point, OdGePoint2d &paramPoint, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	closestPointTo (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	closestPointTo (const OdGePoint3d &point, OdGePoint2d param, const OdGeUvBox uvBox, const OdGeTol &tol=OdGeContext::gTol) const

void	getClosestPointTo (const OdGePoint3d &point, OdGePointOnSurface &pntOnSurface, const OdGeTol &tol=OdGeContext::gTol) const

double	distanceTo (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

bool	isNormalReversed () const

bool	isLeftHanded () const

OdGeSurface &	reverseNormal ()

void	getEnvelope (OdGeInterval &intrvlU, OdGeInterval &intrvlV) const

void	getEnvelope (OdGeUvBox &uvbox) const

bool	isClosedInU (const OdGeTol &tol=OdGeContext::gTol) const

bool	isClosedInV (const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	evalPoint (const OdGePoint2d &param) const

OdGePoint3d	evalPoint (const OdGePoint2d &param, int numDeriv, OdGeVector3dArray &derivatives) const

OdGePoint3d	evalPoint (const OdGePoint2d &param, int numDeriv, OdGeVector3dArray &derivatives, OdGeVector3d &normal) const

OdGeSurface &	operator= (const OdGeSurface &surf)

OdGeExtents3d	getGeomExtents (const OdGeUvBox &range=OdGeUvBox(), const OdGeMatrix3d *coordSystem=NULL) const

bool	project (const OdGePoint3d &p, OdGePoint3d &projP, const OdGeTol &tol=OdGeContext::gTol) const

bool	setEnvelope (const OdGeInterval &realIntrvlU, const OdGeInterval &realIntrvlV)

OdGeCurve3d *	makeIsoparamCurve (bool byU, double param) const

OdGeCurve3d *	makeIsoparamCurve (bool byU, double param, const OdGeInterval &interval) const

bool	getPoles (OdGeDoubleArray uParams, OdGeDoubleArray vParams, OdGePoint3dArray uPoints, OdGePoint3dArray vPoints, double tol=1e-13) const

Public Member Functions inherited from OdGeEntity3d
	ODRX_HEAP_OPERATORS ()

	~OdGeEntity3d ()

bool	isKindOf (OdGe::EntityId entType) const

OdGe::EntityId	type () const

OdGeEntity3d *	copy () const

OdGeEntity3d &	operator= (const OdGeEntity3d &entity)

bool	operator== (const OdGeEntity3d &entity) const

bool	operator!= (const OdGeEntity3d &entity) const

bool	isEqualTo (const OdGeEntity3d &object, const OdGeTol &tol=OdGeContext::gTol) const

OdGeEntity3d &	transformBy (const OdGeMatrix3d &xfm)

OdGeEntity3d &	translateBy (const OdGeVector3d &translateVec)

OdGeEntity3d &	rotateBy (double angle, const OdGeVector3d &vect, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)

OdGeEntity3d &	mirror (const OdGePlane &plane)

OdGeEntity3d &	scaleBy (double scaleFactor, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)

bool	isOn (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

Additional Inherited Members
Protected Member Functions inherited from OdGePlanarEnt
	OdGePlanarEnt ()

	OdGePlanarEnt (const OdGePlanarEnt &plane)

Protected Member Functions inherited from OdGeSurface
	OdGeSurface ()

	OdGeSurface (const OdGeSurface &surf)

Protected Member Functions inherited from OdGeEntity3d
	OdGeEntity3d ()

	OdGeEntity3d (const OdGeEntity3d &)

void	connectTo (OdGeEntity3dImpl *)

Detailed Description

This class represents bounded planes in 3D space.

Corresponding C++ library: TD_Ge

See also: <link ge_OdGeBoundedPlane, Working with Bounded Planes>; <link OdGePlanarEnt, OdGePlanarEnt Class>

Definition at line 51 of file GeBoundedPlane.h.

Constructor & Destructor Documentation

◆ OdGeBoundedPlane() [1/4]

OdGeBoundedPlane::OdGeBoundedPlane ( )

The default constructor for the OdGeBoundedPlane class. Constructs an infinite plane coinciding with the XY plane.

◆ OdGeBoundedPlane() [2/4]

OdGeBoundedPlane::OdGeBoundedPlane ( const OdGeBoundedPlane & plane )

Constructor for the OdGeBoundedPlane class.

Parameters

plane [in] A plane to be cloned.

Remarks: Copies the input OdGeBoundedPlane object.

◆ OdGeBoundedPlane() [3/4]

OdGeBoundedPlane::OdGeBoundedPlane	(	const OdGePoint3d &	origin,
		const OdGeVector3d &	uAxis,
		const OdGeVector3d &	vAxis
	)

Constructor for the OdGeBoundedPlane class.

Parameters

origin	[in] Origin of the bounded plane.
uAxis	[in] U-axis.
vAxis	[in] V-axis.

Remarks: Constructs a plane with the specified parameters.

◆ OdGeBoundedPlane() [4/4]

OdGeBoundedPlane::OdGeBoundedPlane	(	const OdGePoint3d &	uPnt,
		const OdGePoint3d &	origin,
		const OdGePoint3d &	vPnt
	)

Constructor for the OdGeBoundedPlane class.

Parameters

uPnt	[in] A point at the end of the U-axis.
origin	[in] Origin of the bounded plane.
vPnt	[in] A point at the end of the V-axis.

Remarks: Constructs a plane with the specified parameters.

Member Function Documentation

◆ intersectWith() [1/2]

bool OdGeBoundedPlane::intersectWith	(	const OdGeBoundedPlane &	plane,
		OdGeLineSeg3d &	intLine,
		const OdGeTol &	tol = `OdGeContext::gTol`
	)		const

Checks for an intersection with a plane.

Parameters

plane	[in] Input plane that is tested for an intersection.
intLine	[out] A computed line segment of an intersection.
tol	[in] Geometric tolerance.

Returns: Returns a bool value that indicates if an intersection occurred.

Remarks: If this plane intersects with an input plane, the method returns true, otherwise it returns false.

◆ intersectWith() [2/2]

bool OdGeBoundedPlane::intersectWith	(	const OdGePlane &	plane,
		OdGeLineSeg3d &	intLine,
		const OdGeTol &	tol = `OdGeContext::gTol`
	)		const

Checks for an intersection with a plane.

Parameters

plane	[in] Input plane that is tested for an intersection.
intLine	[out] A computed line segment of an intersection.
tol	[in] Geometric tolerance.

Returns: true if this plane intersects with an input plane, otherwise it returns false.

◆ operator=()

OdGeBoundedPlane & OdGeBoundedPlane::operator= ( const OdGeBoundedPlane & plane )

The assignment operator for the OdGeBoundedPlane class.

Parameters

plane [in] Input OdGeBoundedPlane object.

Returns: A reference to this OdGeBoundedPlane object.

◆ set() [1/2]

OdGeBoundedPlane & OdGeBoundedPlane::set	(	const OdGePoint3d &	origin,
		const OdGeVector3d &	uAxis,
		const OdGeVector3d &	vAxis
	)

Sets parameters for this plane according to the arguments, and returns a reference to this plane.

Parameters

origin	[in] The origin of the bounded plane.
uAxis	[in] The U-axis of the plane.
vAxis	[in] The V-axis of the plane.

Returns: Reference to this plane.

◆ set() [2/2]

OdGeBoundedPlane & OdGeBoundedPlane::set	(	const OdGePoint3d &	uPnt,
		const OdGePoint3d &	origin,
		const OdGePoint3d &	vPnt
	)

Sets parameters for this plane according to the arguments, and returns a reference to this plane.

Parameters

origin	[in] The origin of the bounded plane.
uPnt	[in] A point at the end of the U-axis.
vPnt	[in] A point at the end of the V-axis.

Returns: Reference to this plane.

◆ TD_USING()

OdGeBoundedPlane::TD_USING ( OdGePlanarEnt::intersectWith )

The documentation for this class was generated from the following file:

GeBoundedPlane.h

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ OdGeBoundedPlane() [1/4]

◆ OdGeBoundedPlane() [2/4]

◆ OdGeBoundedPlane() [3/4]

◆ OdGeBoundedPlane() [4/4]

Member Function Documentation

◆ intersectWith() [1/2]

◆ intersectWith() [2/2]

◆ operator=()

◆ set() [1/2]

◆ set() [2/2]

◆ TD_USING()