CFx SDK Documentation 2024 SP0
Loading...
Searching...
No Matches
Protected Member Functions | List of all members
OdGiPlineContourCalcSimplifierInheritance< SimplClass > Class Template Reference

#include <GiPlineContour.h>

Inheritance diagram for OdGiPlineContourCalcSimplifierInheritance< SimplClass >:
OdGiGeometrySimplifier OdGiConveyorGeometry

Protected Member Functions

void setPlineCalcInterface (OdGiPlineContourCalcSimplifierInterface *pInterface)
 
virtual void generateShellWires (OdInt32 faceListSize, const OdInt32 *faceList, const OdGiEdgeData *pEdgeData=0, const OdGiFaceData *pFaceData=0)
 
void plineCalcRedirectGenerateShellWires (OdInt32 faceListSize, const OdInt32 *faceList, const OdGiEdgeData *pEdgeData, const OdGiFaceData *pFaceData)
 
OdGiGeometrySimplifier * plineCalcSimplifier ()
 
- Protected Member Functions inherited from OdGiGeometrySimplifier
void drawTypedArc (OdGiArcType arcType, const OdGePoint3d &center, OdGePoint3dArray &points, const OdGeVector3d *pNormal, const OdGeVector3d *pExtrusion)
 
double deviation (const OdGiDeviationType deviationType, const OdGePoint3d &pointOnCurve) const
 
bool fillMode ()
 
bool fillMode (bool &drawEdges)
 
bool fillMode (bool &drawEdges, bool &secColor)
 
bool circleArcFillMode ()
 
bool shmFillMode (bool &drawEdges)
 
bool shmFillMode (bool &drawEdges, bool &secColor)
 
bool processingText () const
 
bool silhouettesProcessingInEyeSpace () const
 
void enableSilhouettesProcessingInEyeSpace (bool bEnable)
 
OdGiContext & giCtx () const
 
virtual bool plineArcSegmentsAsArcProc (OdUInt32 drawContextFlags) const
 
bool jointLineWithArc (const OdGiPolyline &lwBuf, OdInt32 LineSegNo, OdInt32 ArcSegNo, OdGePoint3dArray &points)
 
bool jointLineWithLine (const OdGiPolyline &lwBuf, OdInt32 LineSegNo1, OdInt32 LineSegNo2, OdGePoint3dArray &points)
 
bool jointArcWithLine (const OdGiPolyline &lwBuf, OdGeCircArc2d &arc, OdInt32 arcSegNo, OdInt32 lineSegNo, OdGePoint3d &point1, OdGePoint3d &point2)
 
bool isMeshRequireVertexNormals (const OdGiVertexData *pVertexData)
 
void generateMeshVertexNormals (OdInt32 numRows, OdInt32 numCols, const OdGePoint3d *pVertexList, const OdGiVertexData *pVertexData, OdGiVertexData &vertexData, OdGeVector3dArray &normals)
 
void polylineOut (OdInt32 numPoints, const OdInt32 *vertexIndexList, const OdGiEdgeData *pEdgeData, OdInt32 nEdgeIndex)
 
OdGeLineSeg2d & tmpLineSeg2d ()
 
OdGeLineSeg2d & tmpLineSeg2dEx (int n)
 
OdGeLine2d & tmpLine2dEx (int n)
 
OdGeCircArc2d & tmpCircArc2d ()
 
OdGeCircArc3d & tmpCircArc3d ()
 
OdGeEllipArc3d & tmpEllipArc3d ()
 
OdGePoint3dArray & tmpPoints3d (int nLevel)
 

Additional Inherited Members

- Public Types inherited from OdGiConveyorGeometry
enum  ETtfCharProcFlags { kTtfCharProcEnable = 1 , kTtfCharProcBoundBlock = 2 }
 
enum  EConveyorBoundaryInfoFlags {
  kBoundaryProcXform = 1 , kBoundaryProcXformNonUni = 2 , kBoundaryProcProjection = 4 , kBoundaryProcClip = 8 ,
  kBoundaryProcClipFull = 16
}
 
- Public Member Functions inherited from OdGiGeometrySimplifier
 OdGiGeometrySimplifier ()
 
 ~OdGiGeometrySimplifier ()
 
void setDeviation (const OdGeDoubleArray &deviations)
 
void setDeviation (const OdGiDeviation *pDeviation)
 
OdGsView::RenderMode renderMode ()
 
void setDrawContext (OdGiConveyorContext *pDrawCtx)
 
OdGiConveyorContext * drawContext ()
 
const OdGiConveyorContext * drawContext () const
 
virtual void polylineOut (OdInt32 numPoints, const OdGePoint3d *vertexList)
 
virtual void polygonOut (OdInt32 numPoints, const OdGePoint3d *vertexList, const OdGeVector3d *pNormal=0)
 
void setVertexData (OdInt32 numVertices, const OdGePoint3d *vertexList, const OdGiVertexData *pVertexData=0)
 
OdInt32 vertexDataCount () const
 
const OdGePoint3d * vertexDataList () const
 
const OdGiVertexData * vertexData () const
 
OdGsMarker baseSubEntMarker () const
 
OdGiVisibility polylineOutEdgeVisibility () const
 
virtual void plineProc (const OdGiPolyline &polyline, const OdGeMatrix3d *pXfm=0, OdUInt32 fromIndex=0, OdUInt32 numSegs=0)
 
virtual void polylineProc (OdInt32 numPoints, const OdGePoint3d *vertexList, const OdGeVector3d *pNormal=0, const OdGeVector3d *pExtrusion=0, OdGsMarker baseSubEntMarker=-1)
 
virtual void polygonProc (OdInt32 numPoints, const OdGePoint3d *vertexList, const OdGeVector3d *pNormal=0, const OdGeVector3d *pExtrusion=0)
 
virtual void xlineProc (const OdGePoint3d &firstPoint, const OdGePoint3d &secondPoint)
 
virtual void rayProc (const OdGePoint3d &basePoint, const OdGePoint3d &throughPoint)
 
virtual void meshProc (OdInt32 numRows, OdInt32 numColumns, const OdGePoint3d *vertexList, const OdGiEdgeData *pEdgeData=0, const OdGiFaceData *pFaceData=0, const OdGiVertexData *pVertexData=0)
 
virtual void generateMeshWires (OdInt32 numRows, OdInt32 numColumns, const OdGiEdgeData *pEdgeData, const OdGiFaceData *pFaceData)
 
virtual void generateMeshFaces (OdInt32 numRows, OdInt32 numColumns, const OdGiFaceData *pFaceData)
 
virtual void meshFaceOut (const OdInt32 *faceList, const OdGeVector3d *pNormal)
 
virtual void filledShellProc (const OdGePoint3d *vertexList, OdInt32 faceListSize, const OdInt32 *faceList, const OdGiEdgeData *pEdgeData=0, const OdGiFaceData *pFaceData=0)
 
virtual void shellProc (OdInt32 numVertices, const OdGePoint3d *vertexList, OdInt32 faceListSize, const OdInt32 *faceList, const OdGiEdgeData *pEdgeData=0, const OdGiFaceData *pFaceData=0, const OdGiVertexData *pVertexData=0)
 
virtual void generateShellWires (OdInt32 faceListSize, const OdInt32 *faceList, const OdGiEdgeData *pEdgeData=0, const OdGiFaceData *pFaceData=0)
 
virtual void generateShellFaces (OdInt32 faceListSize, const OdInt32 *faceList, const OdGiEdgeData *pEdgeData=0, const OdGiFaceData *pFaceData=0)
 
virtual void shellFaceOut (OdInt32 faceListSize, const OdInt32 *faceList, const OdGeVector3d *pNormal)
 
virtual void triangleOut (const OdInt32 *vertices, const OdGeVector3d *pNormal)
 
virtual void generateShellFacets (OdInt32 faceListSize, const OdInt32 *faceList, const OdGiFaceData *pFaceData=0, OdInt32 maxFacetSize=3)
 
virtual void facetOut (const OdInt32 *faceList, const OdInt32 *edgeIndices, const OdGeVector3d *pNormal)
 
virtual void circleProc (const OdGePoint3d &center, double radius, const OdGeVector3d &normal, const OdGeVector3d *pExtrusion=0)
 
void circleProc2 (const OdGePoint3d &center, double radius, const OdGeVector3d &normal, const OdGeVector3d &startVector, const OdGeVector3d *pExtrusion=0)
 
virtual void circleProc (const OdGePoint3d &firstPoint, const OdGePoint3d &secondPoint, const OdGePoint3d &thirdPoint, const OdGeVector3d *pExtrusion=0)
 
virtual void circularArcProc (const OdGePoint3d &center, double radius, const OdGeVector3d &normal, const OdGeVector3d &startVector, double sweepAngle, OdGiArcType arcType=kOdGiArcSimple, const OdGeVector3d *pExtrusion=0)
 
virtual void circularArcProc (const OdGePoint3d &firstPoint, const OdGePoint3d &secondPoint, const OdGePoint3d &thirdPoint, OdGiArcType arcType=kOdGiArcSimple, const OdGeVector3d *pExtrusion=0)
 
virtual void textProc (const OdGePoint3d &position, const OdGeVector3d &u, const OdGeVector3d &v, const OdChar *msg, OdInt32 length, bool raw, const OdGiTextStyle *pTextStyle, const OdGeVector3d *pExtrusion=0)
 
virtual void textProc2 (const OdGePoint3d &position, const OdGeVector3d &u, const OdGeVector3d &v, const OdChar *msg, OdInt32 length, bool raw, const OdGiTextStyle *pTextStyle, const OdGeVector3d *pExtrusion=0, const OdGeExtents3d *extentsBox=0)
 
virtual void shapeProc (const OdGePoint3d &position, const OdGeVector3d &direction, const OdGeVector3d &upVector, int shapeNumber, const OdGiTextStyle *pTextStyle, const OdGeVector3d *pExtrusion=0)
 
virtual void nurbsProc (const OdGeNurbCurve3d &nurbsCurve)
 
virtual void ellipArcProc (const OdGeEllipArc3d &ellipArc, const OdGePoint3d *endPointOverrides=0, OdGiArcType arcType=kOdGiArcSimple, const OdGeVector3d *pExtrusion=0)
 
virtual bool ellipArcProc (const OdGeEllipArc3d &ellipArc, double width)
 
virtual void rasterImageProc (const OdGePoint3d &origin, const OdGeVector3d &u, const OdGeVector3d &v, const OdGiRasterImage *pImage, const OdGePoint2d *uvBoundary, OdUInt32 numBoundPts, bool transparency=false, double brightness=50.0, double contrast=50.0, double fade=0.0)
 
virtual void initTexture (const OdGePoint3d &origin, const OdGeVector3d &u, const OdGeVector3d &v, const OdGiRasterImage *pImage, bool transparency, double brightness, double contrast, double fade)
 
virtual void uninitTexture ()
 
virtual void metafileProc (const OdGePoint3d &origin, const OdGeVector3d &u, const OdGeVector3d &v, const OdGiMetafile *pMetafile, bool dcAligned=true, bool allowClipping=false)
 
virtual void polypointProc (OdInt32 numPoints, const OdGePoint3d *vertexList, const OdCmEntityColor *pColors, const OdCmTransparency *pTransparency=0, const OdGeVector3d *pNormals=0, const OdGeVector3d *pExtrusions=0, const OdGsMarker *pSubEntMarkers=0, OdInt32 nPointSize=0)
 
virtual void rowOfDotsProc (OdInt32 numPoints, const OdGePoint3d &startPoint, const OdGeVector3d &dirToNextPoint)
 
virtual void pointCloudProc (const OdGiPointCloud &pCloud, const OdGiPointCloudFilter *pFilter=NULL)
 
virtual void edgeProc (const OdGiEdge2dArray &edges, const OdGeMatrix3d *pXform=0)
 
virtual void polylineOut (OdInt32 numPoints, const OdInt32 *vertexIndexList)
 
void convertMeshToShell (OdInt32 rows, OdInt32 columns, const OdGePoint3d *pVertexList, const OdGiEdgeData *pEdgeData, const OdGiFaceData *pFaceData, const OdGiVertexData *pVertexData)
 
virtual void ttfPolyDrawProc (OdInt32 numVertices, const OdGePoint3d *vertexList, OdInt32 faceListSize, const OdInt32 *faceList, const OdUInt8 *pBezierTypes, const OdGiFaceData *pFaceData=0)
 
void subdivideShellByVertexLimit (OdInt32 numVertices, const OdGePoint3d *vertexList, OdInt32 faceListSize, const OdInt32 *faceList, const OdGiEdgeData *pEdgeData, const OdGiFaceData *pFaceData, const OdGiVertexData *pVertexData, OdUInt32 nLimit)
 
virtual bool generateShellFill (OdGiHatchPatternPtr pHatch, OdDouble &fillDensity, const OdGePoint3d *pVertexList, OdInt32 faceListSize, const OdInt32 *pFaceList, const OdGiFaceData *pFaceData=0, OdGiMapperItemEntry *pMapper=0)
 
- Public Member Functions inherited from OdGiConveyorGeometry
virtual ~OdGiConveyorGeometry ()
 
virtual void plineProc (const OdGiPolyline &polyline, const OdGeMatrix3d *pXfm=0, OdUInt32 fromIndex=0, OdUInt32 numSegs=0)=0
 
virtual void polylineProc (OdInt32 numPoints, const OdGePoint3d *vertexList, const OdGeVector3d *pNormal=0, const OdGeVector3d *pExtrusion=0, OdGsMarker baseSubEntMarker=-1)=0
 
virtual void polygonProc (OdInt32 numPoints, const OdGePoint3d *vertexList, const OdGeVector3d *pNormal=0, const OdGeVector3d *pExtrusion=0)=0
 
virtual void xlineProc (const OdGePoint3d &firstPoint, const OdGePoint3d &secondPoint)=0
 
virtual void rayProc (const OdGePoint3d &basePoint, const OdGePoint3d &throughPoint)=0
 
virtual void meshProc (OdInt32 numRows, OdInt32 numColumns, const OdGePoint3d *vertexList, const OdGiEdgeData *pEdgeData=0, const OdGiFaceData *pFaceData=0, const OdGiVertexData *pVertexData=0)=0
 
virtual void shellProc (OdInt32 numVertices, const OdGePoint3d *vertexList, OdInt32 faceListSize, const OdInt32 *faceList, const OdGiEdgeData *pEdgeData=0, const OdGiFaceData *pFaceData=0, const OdGiVertexData *pVertexData=0)=0
 
virtual void circleProc (const OdGePoint3d &center, double radius, const OdGeVector3d &normal, const OdGeVector3d *pExtrusion=0)=0
 
virtual void circleProc2 (const OdGePoint3d &center, double radius, const OdGeVector3d &normal, const OdGeVector3d &, const OdGeVector3d *pExtrusion=0)
 
virtual void circleProc (const OdGePoint3d &firstPoint, const OdGePoint3d &secondPoint, const OdGePoint3d &thirdPoint, const OdGeVector3d *pExtrusion=0)=0
 
virtual void circularArcProc (const OdGePoint3d &center, double radius, const OdGeVector3d &normal, const OdGeVector3d &startVector, double sweepAngle, OdGiArcType arcType=kOdGiArcSimple, const OdGeVector3d *pExtrusion=0)=0
 
virtual void circularArcProc (const OdGePoint3d &firstPoint, const OdGePoint3d &secondPoint, const OdGePoint3d &thirdPoint, OdGiArcType arcType=kOdGiArcSimple, const OdGeVector3d *pExtrusion=0)=0
 
virtual void ellipArcProc (const OdGeEllipArc3d &ellipArc, const OdGePoint3d *endPointOverrides=0, OdGiArcType arcType=kOdGiArcSimple, const OdGeVector3d *pExtrusion=0)=0
 
virtual void nurbsProc (const OdGeNurbCurve3d &nurbsCurve)=0
 
virtual void textProc (const OdGePoint3d &position, const OdGeVector3d &direction, const OdGeVector3d &upVector, const OdChar *msg, OdInt32 numBytes, bool raw, const OdGiTextStyle *pTextStyle, const OdGeVector3d *pExtrusion=0)=0
 
virtual void textProc2 (const OdGePoint3d &position, const OdGeVector3d &direction, const OdGeVector3d &upVector, const OdChar *msg, OdInt32 numBytes, bool raw, const OdGiTextStyle *pTextStyle, const OdGeVector3d *pExtrusion=0, const OdGeExtents3d *=0)
 
virtual void shapeProc (const OdGePoint3d &position, const OdGeVector3d &direction, const OdGeVector3d &upVector, int shapeNumber, const OdGiTextStyle *pTextStyle, const OdGeVector3d *pExtrusion=0)=0
 
virtual void rasterImageProc (const OdGePoint3d &origin, const OdGeVector3d &u, const OdGeVector3d &v, const OdGiRasterImage *pImage, const OdGePoint2d *uvBoundary, OdUInt32 numBoundPts, bool transparency=false, double brightness=50.0, double contrast=50.0, double fade=0.0)=0
 
virtual void metafileProc (const OdGePoint3d &origin, const OdGeVector3d &u, const OdGeVector3d &v, const OdGiMetafile *pMetafile, bool dcAligned=true, bool allowClipping=false)=0
 
virtual void xlineProc2 (const OdGePoint3d &basePoint, const OdGeVector3d &direction)
 
virtual void rayProc2 (const OdGePoint3d &basePoint, const OdGeVector3d &direction)
 
virtual void setExtentsProc (const OdGePoint3d *, bool=true)
 
virtual int ttfCharProcFlags () const
 
virtual bool ttfCharProc (OdChar, bool, const OdGePoint3d &, const OdGeBoundBlock3d *)
 
virtual void ttfPolyDrawProc (OdInt32 numVertices, const OdGePoint3d *vertexList, OdInt32 faceListSize, const OdInt32 *faceList, const OdUInt8 *, const OdGiFaceData *pFaceData=0)
 
virtual void conveyorBoundaryInfoProc (const OdGeBoundBlock3d &, OdUInt32 &)
 
void polypointProc2 (OdGiConveyorContext *pContext, OdInt32 numPoints, const OdGePoint3d *vertexList, const OdCmEntityColor *pColors=0, const OdCmTransparency *pTransparency=0, const OdGeVector3d *pNormals=0, const OdGeVector3d *pExtrusions=0, const OdGsMarker *pSubEntMarkers=0, OdInt32 nPointSize=0)
 
void rowOfDotsProc2 (OdInt32 numPoints, const OdGePoint3d &startPoint, const OdGeVector3d &dirToNextPoint)
 
virtual void polypointProc (OdInt32 numPoints, const OdGePoint3d *vertexList, const OdCmEntityColor *pColors, const OdCmTransparency *pTransparency=0, const OdGeVector3d *pNormals=0, const OdGeVector3d *pExtrusions=0, const OdGsMarker *pSubEntMarkers=0, OdInt32 nPointSize=0)=0
 
void polyPolygonProc2 (OdGiConveyorContext *pContext, OdUInt32 numIndices, const OdUInt32 *pNumPositions, const OdGePoint3d *pPositions, const OdUInt32 *pNumPoints, const OdGePoint3d *pPoints, const OdCmEntityColor *pOutlineColors=NULL, const OdUInt32 *pOutlinePsLinetypes=NULL, const OdCmEntityColor *pFillColors=NULL, const OdCmTransparency *pFillTransparencies=NULL)
 
virtual void rowOfDotsProc (OdInt32 numPoints, const OdGePoint3d &startPoint, const OdGeVector3d &dirToNextPoint)=0
 
void pointCloudProc2 (OdGiConveyorContext *pContext, const OdGiPointCloud &pCloud, const OdGiPointCloudFilter *pFilter)
 
virtual void pointCloudProc (const OdGiPointCloud &pCloud, const OdGiPointCloudFilter *pFilter=NULL)=0
 
virtual void edgeProc (const OdGiEdge2dArray &edges, const OdGeMatrix3d *pXform=0)=0
 
- Protected Types inherited from OdGiGeometrySimplifier
enum  SimplifierFlags {
  kSimplProcessingText = (1 << 0) , kSimplFillModeDisabled = (1 << 1) , kSimplEyeSpaceSilhs = (1 << 2) , kSimplEdgeVisible = (1 << 3) ,
  kSimplEdgeSilhouette = (1 << 4) , kSimplNoFaceNormals = (1 << 5) , kSimplGenTrgNormals = (1 << 6) , kSimplLastFlag = kSimplGenTrgNormals ,
  kZInverted = (1 << 30) , kDiscardBackFaces = (1 << 31)
}
 
- Protected Attributes inherited from OdGiGeometrySimplifier
OdGiConveyorContext * m_pDrawCtx
 
OdGiSubEntityTraits * m_pTraits
 
OdGsMarker m_baseSubEntMarker
 
OdUInt32 m_simplFlags
 
const OdGiDeviation * m_pDeviation
 
OdGeDoubleArray m_deviations
 
OdGsView::RenderMode m_renderMode
 
OdGeLineSeg2d * m_pLineSeg2d
 
OdGeLineSeg2d * m_pLineSeg2dEx [2]
 
OdGeLine2d * m_pLine2dEx [4]
 
OdGeCircArc2d * m_pCircArc2d
 
OdGeCircArc3d * m_pCircArc3d
 
OdGeEllipArc3d * m_pEllipArc3d
 

Detailed Description

template<typename SimplClass = OdGiGeometrySimplifier>
class OdGiPlineContourCalcSimplifierInheritance< SimplClass >

Helper class to provide direct inheritance from OdGiGeometrySimplifier for pline primitive contours calculator. <group OdGi_Classes>

Definition at line 72 of file GiPlineContour.h.

Member Function Documentation

◆ generateShellWires()

template<typename SimplClass = OdGiGeometrySimplifier>
virtual void OdGiPlineContourCalcSimplifierInheritance< SimplClass >::generateShellWires ( OdInt32  faceListSize,
const OdInt32 *  faceList,
const OdGiEdgeData *  pEdgeData = 0,
const OdGiFaceData *  pFaceData = 0 
)
inlineprotectedvirtual

Tessellates a wireframe shell.

Parameters
faceListSize[in] Number of entries in faceList.
faceList[in] List of numbers that define the faces in the shell.
pEdgeData[in] Pointer to additional edge data.
pFaceData[in] Pointer to additional face data.

Reimplemented from OdGiGeometrySimplifier.

Definition at line 88 of file GiPlineContour.h.

◆ plineCalcRedirectGenerateShellWires()

template<typename SimplClass = OdGiGeometrySimplifier>
void OdGiPlineContourCalcSimplifierInheritance< SimplClass >::plineCalcRedirectGenerateShellWires ( OdInt32  faceListSize,
const OdInt32 *  faceList,
const OdGiEdgeData *  pEdgeData,
const OdGiFaceData *  pFaceData 
)
inlineprotected

Redirects generateShellWires call onto geometry simplifier.

Parameters
faceListSize[in] Number of entries in faceList.
faceList[in] List of numbers that define the faces in the shell.
pEdgeData[in] Pointer to additional edge data.
pFaceData[in] Pointer to additional face data.

Definition at line 100 of file GiPlineContour.h.

◆ plineCalcSimplifier()

template<typename SimplClass = OdGiGeometrySimplifier>
OdGiGeometrySimplifier * OdGiPlineContourCalcSimplifierInheritance< SimplClass >::plineCalcSimplifier ( )
inlineprotected

Returns geometry simplifier interface.

Definition at line 108 of file GiPlineContour.h.

◆ setPlineCalcInterface()

template<typename SimplClass = OdGiGeometrySimplifier>
void OdGiPlineContourCalcSimplifierInheritance< SimplClass >::setPlineCalcInterface ( OdGiPlineContourCalcSimplifierInterface *  pInterface)
inlineprotected

Setup pline calculation interface.

Parameters
pInterface[in] Pointer onto pline calculation interface.

Definition at line 80 of file GiPlineContour.h.

The documentation for this class was generated from the following file:
Generated on Wed Apr 5 2023 17:31:19