#include <GsExtAccum.h>

Inheritance diagram for OdGsExtAccum:

Public Member Functions
	ODRX_DECLARE_MEMBERS (OdGsExtAccum)

OdGiConveyorGeometry *	optionalGeometry ()

OdGiExtAccum *	giExtAccum ()

const OdGiExtAccum *	giExtAccum () const

virtual void	setBaseView (OdGsViewImpl *pBaseVV)

OdGsViewImpl *	baseView ()

virtual void	setDrawContext (OdGiConveyorContext *pDrawContext)

virtual OdGiConveyorGeometry &	geometry ()

virtual bool	getExtents (OdGeExtents3d &extents) const

virtual void	resetExtents (const OdGeExtents3d &newExtents=OdGeExtents3d())

virtual void	addExtents (const OdGeExtents3d &extents)

virtual bool	plineContainBulges () const

virtual void	setDeviation (const OdGeDoubleArray &deviations)

virtual void	setDeviation (const OdGiDeviation *pDeviation)

OdDb::LineWeight	getLineweight () const

void	addLineweight (OdDb::LineWeight lwd)

virtual OdGiConveyorInput &	input ()

virtual OdGiConveyorOutput &	output ()

virtual void	plineProc (const OdGiPolyline &polyline, const OdGeMatrix3d *pXfm=0, OdUInt32 fromIndex=0, OdUInt32 numSegs=0)

virtual void	polylineProc (OdInt32 numPoints, const OdGePoint3d vertexList, const OdGeVector3d pNormal=0, const OdGeVector3d *pExtrusion=0, OdGsMarker baseSubEntMarker=-1)

virtual void	polygonProc (OdInt32 numPoints, const OdGePoint3d vertexList, const OdGeVector3d pNormal=0, const OdGeVector3d *pExtrusion=0)

virtual void	xlineProc (const OdGePoint3d &firstPoint, const OdGePoint3d &secondPoint)

virtual void	rayProc (const OdGePoint3d &basePoint, const OdGePoint3d &throughPoint)

virtual void	meshProc (OdInt32 numRows, OdInt32 numColumns, const OdGePoint3d vertexList, const OdGiEdgeData pEdgeData=0, const OdGiFaceData pFaceData=0, const OdGiVertexData pVertexData=0)

virtual void	shellProc (OdInt32 numVertices, const OdGePoint3d vertexList, OdInt32 faceListSize, const OdInt32 faceList, const OdGiEdgeData pEdgeData=0, const OdGiFaceData pFaceData=0, const OdGiVertexData *pVertexData=0)

virtual void	circleProc (const OdGePoint3d &center, double radius, const OdGeVector3d &normal, const OdGeVector3d *pExtrusion=0)

virtual void	circleProc (const OdGePoint3d &firstPoint, const OdGePoint3d &secondPoint, const OdGePoint3d &thirdPoint, const OdGeVector3d *pExtrusion=0)

virtual void	circularArcProc (const OdGePoint3d &center, double radius, const OdGeVector3d &normal, const OdGeVector3d &startVector, double sweepAngle, OdGiArcType arcType=kOdGiArcSimple, const OdGeVector3d *pExtrusion=0)

virtual void	circularArcProc (const OdGePoint3d &firstPoint, const OdGePoint3d &secondPoint, const OdGePoint3d &thirdPoint, OdGiArcType arcType=kOdGiArcSimple, const OdGeVector3d *pExtrusion=0)

virtual void	ellipArcProc (const OdGeEllipArc3d &ellipArc, const OdGePoint3d endPointOverrides=0, OdGiArcType arcType=kOdGiArcSimple, const OdGeVector3d pExtrusion=0)

virtual void	nurbsProc (const OdGeNurbCurve3d &nurbsCurve)

virtual void	textProc (const OdGePoint3d &position, const OdGeVector3d &direction, const OdGeVector3d &upVector, const OdChar msg, OdInt32 numBytes, bool raw, const OdGiTextStyle pTextStyle, const OdGeVector3d *pExtrusion=0)

virtual void	textProc2 (const OdGePoint3d &position, const OdGeVector3d &direction, const OdGeVector3d &upVector, const OdChar msg, OdInt32 numBytes, bool raw, const OdGiTextStyle pTextStyle, const OdGeVector3d pExtrusion=0, const OdGeExtents3d extentsBox=0)

virtual void	shapeProc (const OdGePoint3d &position, const OdGeVector3d &direction, const OdGeVector3d &upVector, int shapeNumber, const OdGiTextStyle pTextStyle, const OdGeVector3d pExtrusion=0)

virtual void	rasterImageProc (const OdGePoint3d &origin, const OdGeVector3d &u, const OdGeVector3d &v, const OdGiRasterImage pImage, const OdGePoint2d uvBoundary, OdUInt32 numBoundPts, bool transparency=false, double brightness=50.0, double contrast=50.0, double fade=0.0)

virtual void	metafileProc (const OdGePoint3d &origin, const OdGeVector3d &u, const OdGeVector3d &v, const OdGiMetafile *pMetafile, bool dcAligned=true, bool allowClipping=false)

virtual void	setExtentsProc (const OdGePoint3d *pPoints, bool bTransform=true)

virtual void	polypointProc (OdInt32 numPoints, const OdGePoint3d vertexList, const OdCmEntityColor pColors, const OdCmTransparency pTransparency=0, const OdGeVector3d pNormals=0, const OdGeVector3d pExtrusions=0, const OdGsMarker pSubEntMarkers=0, OdInt32 nPointSize=0)

virtual void	rowOfDotsProc (OdInt32 numPoints, const OdGePoint3d &startPoint, const OdGeVector3d &dirToNextPoint)

virtual void	pointCloudProc (const OdGiPointCloud &pCloud, const OdGiPointCloudFilter *pFilter=NULL)

void	edgeProc (const OdGiEdge2dArray &edges, const OdGeMatrix3d *pXform=0)

Public Member Functions inherited from OdGiExtAccum
	ODRX_DECLARE_MEMBERS (OdGiExtAccum)

virtual void	setDrawContext (OdGiConveyorContext *pDrawContext)=0

virtual void	setDeviation (const OdGeDoubleArray &deviations)=0

virtual void	setDeviation (const OdGiDeviation *pDeviation)=0

virtual OdGiConveyorGeometry &	geometry ()=0

virtual bool	getExtents (OdGeExtents3d &extents) const =0

virtual void	resetExtents (const OdGeExtents3d &newExtents=OdGeExtents3d())=0

virtual void	addExtents (const OdGeExtents3d &extents)=0

virtual bool	plineContainBulges () const =0

Public Member Functions inherited from OdGiConveyorNode
	ODRX_DECLARE_MEMBERS (OdGiConveyorNode)

virtual OdGiConveyorInput &	input ()=0

virtual OdGiConveyorOutput &	output ()=0

Public Member Functions inherited from OdRxObject
	ODRX_HEAP_OPERATORS ()

	OdRxObject ()

virtual	~OdRxObject ()

virtual OdRxObject *	queryX (const OdRxClass *pClass) const

virtual OdRxObject *	x (const OdRxClass *pClass) const

virtual OdRxClass *	isA () const

virtual void	addRef ()=0

virtual void	release ()=0

virtual long	numRefs () const

bool	isKindOf (const OdRxClass *pClass) const

virtual OdRxObjectPtr	clone () const

virtual void	copyFrom (const OdRxObject *pSource)

virtual OdRx::Ordering	comparedTo (const OdRxObject *pOther) const

virtual bool	isEqualTo (const OdRxObject *pOther) const

Public Member Functions inherited from OdGsConveyorNodeBase
	OdGsConveyorNodeBase ()

void	addSourceNode (OdGiConveyorOutput &sourceNode)

void	removeSourceNode (OdGiConveyorOutput &sourceNode)

void	setDestGeometry (OdGiConveyorGeometry &destGeometry)

OdGiConveyorGeometry &	destGeometry () const

void	updateLink ()

void	updateLink (OdGiConveyorGeometry *pGeometry)

virtual OdGiConveyorGeometry *	optionalGeometry ()=0

virtual	~OdGsConveyorNodeBase ()

Public Member Functions inherited from OdGiConveyorInput
virtual void	addSourceNode (OdGiConveyorOutput &sourceNode)=0

virtual void	removeSourceNode (OdGiConveyorOutput &sourceNode)=0

virtual	~OdGiConveyorInput ()

Public Member Functions inherited from OdGiConveyorOutput
virtual void	setDestGeometry (OdGiConveyorGeometry &destGeometry)=0

virtual OdGiConveyorGeometry &	destGeometry () const =0

virtual	~OdGiConveyorOutput ()

Public Member Functions inherited from OdGiConveyorGeometry
virtual	~OdGiConveyorGeometry ()

virtual void	plineProc (const OdGiPolyline &polyline, const OdGeMatrix3d *pXfm=0, OdUInt32 fromIndex=0, OdUInt32 numSegs=0)=0

virtual void	polylineProc (OdInt32 numPoints, const OdGePoint3d vertexList, const OdGeVector3d pNormal=0, const OdGeVector3d *pExtrusion=0, OdGsMarker baseSubEntMarker=-1)=0

virtual void	polygonProc (OdInt32 numPoints, const OdGePoint3d vertexList, const OdGeVector3d pNormal=0, const OdGeVector3d *pExtrusion=0)=0

virtual void	xlineProc (const OdGePoint3d &firstPoint, const OdGePoint3d &secondPoint)=0

virtual void	rayProc (const OdGePoint3d &basePoint, const OdGePoint3d &throughPoint)=0

virtual void	meshProc (OdInt32 numRows, OdInt32 numColumns, const OdGePoint3d vertexList, const OdGiEdgeData pEdgeData=0, const OdGiFaceData pFaceData=0, const OdGiVertexData pVertexData=0)=0

virtual void	shellProc (OdInt32 numVertices, const OdGePoint3d vertexList, OdInt32 faceListSize, const OdInt32 faceList, const OdGiEdgeData pEdgeData=0, const OdGiFaceData pFaceData=0, const OdGiVertexData *pVertexData=0)=0

virtual void	circleProc (const OdGePoint3d &center, double radius, const OdGeVector3d &normal, const OdGeVector3d *pExtrusion=0)=0

virtual void	circleProc2 (const OdGePoint3d &center, double radius, const OdGeVector3d &normal, const OdGeVector3d &, const OdGeVector3d *pExtrusion=0)

virtual void	circleProc (const OdGePoint3d &firstPoint, const OdGePoint3d &secondPoint, const OdGePoint3d &thirdPoint, const OdGeVector3d *pExtrusion=0)=0

virtual void	circularArcProc (const OdGePoint3d &center, double radius, const OdGeVector3d &normal, const OdGeVector3d &startVector, double sweepAngle, OdGiArcType arcType=kOdGiArcSimple, const OdGeVector3d *pExtrusion=0)=0

virtual void	circularArcProc (const OdGePoint3d &firstPoint, const OdGePoint3d &secondPoint, const OdGePoint3d &thirdPoint, OdGiArcType arcType=kOdGiArcSimple, const OdGeVector3d *pExtrusion=0)=0

virtual void	ellipArcProc (const OdGeEllipArc3d &ellipArc, const OdGePoint3d endPointOverrides=0, OdGiArcType arcType=kOdGiArcSimple, const OdGeVector3d pExtrusion=0)=0

virtual void	nurbsProc (const OdGeNurbCurve3d &nurbsCurve)=0

virtual void	textProc (const OdGePoint3d &position, const OdGeVector3d &direction, const OdGeVector3d &upVector, const OdChar msg, OdInt32 numBytes, bool raw, const OdGiTextStyle pTextStyle, const OdGeVector3d *pExtrusion=0)=0

virtual void	textProc2 (const OdGePoint3d &position, const OdGeVector3d &direction, const OdGeVector3d &upVector, const OdChar msg, OdInt32 numBytes, bool raw, const OdGiTextStyle pTextStyle, const OdGeVector3d pExtrusion=0, const OdGeExtents3d =0)

virtual void	shapeProc (const OdGePoint3d &position, const OdGeVector3d &direction, const OdGeVector3d &upVector, int shapeNumber, const OdGiTextStyle pTextStyle, const OdGeVector3d pExtrusion=0)=0

virtual void	rasterImageProc (const OdGePoint3d &origin, const OdGeVector3d &u, const OdGeVector3d &v, const OdGiRasterImage pImage, const OdGePoint2d uvBoundary, OdUInt32 numBoundPts, bool transparency=false, double brightness=50.0, double contrast=50.0, double fade=0.0)=0

virtual void	metafileProc (const OdGePoint3d &origin, const OdGeVector3d &u, const OdGeVector3d &v, const OdGiMetafile *pMetafile, bool dcAligned=true, bool allowClipping=false)=0

virtual void	xlineProc2 (const OdGePoint3d &basePoint, const OdGeVector3d &direction)

virtual void	rayProc2 (const OdGePoint3d &basePoint, const OdGeVector3d &direction)

virtual void	setExtentsProc (const OdGePoint3d *, bool=true)

virtual int	ttfCharProcFlags () const

virtual bool	ttfCharProc (OdChar, bool, const OdGePoint3d &, const OdGeBoundBlock3d *)

virtual void	ttfPolyDrawProc (OdInt32 numVertices, const OdGePoint3d vertexList, OdInt32 faceListSize, const OdInt32 faceList, const OdUInt8 , const OdGiFaceData pFaceData=0)

virtual void	conveyorBoundaryInfoProc (const OdGeBoundBlock3d &, OdUInt32 &)

void	polypointProc2 (OdGiConveyorContext pContext, OdInt32 numPoints, const OdGePoint3d vertexList, const OdCmEntityColor pColors=0, const OdCmTransparency pTransparency=0, const OdGeVector3d pNormals=0, const OdGeVector3d pExtrusions=0, const OdGsMarker *pSubEntMarkers=0, OdInt32 nPointSize=0)

void	rowOfDotsProc2 (OdInt32 numPoints, const OdGePoint3d &startPoint, const OdGeVector3d &dirToNextPoint)

virtual void	polypointProc (OdInt32 numPoints, const OdGePoint3d vertexList, const OdCmEntityColor pColors, const OdCmTransparency pTransparency=0, const OdGeVector3d pNormals=0, const OdGeVector3d pExtrusions=0, const OdGsMarker pSubEntMarkers=0, OdInt32 nPointSize=0)=0

void	polyPolygonProc2 (OdGiConveyorContext pContext, OdUInt32 numIndices, const OdUInt32 pNumPositions, const OdGePoint3d pPositions, const OdUInt32 pNumPoints, const OdGePoint3d pPoints, const OdCmEntityColor pOutlineColors=NULL, const OdUInt32 pOutlinePsLinetypes=NULL, const OdCmEntityColor pFillColors=NULL, const OdCmTransparency *pFillTransparencies=NULL)

virtual void	rowOfDotsProc (OdInt32 numPoints, const OdGePoint3d &startPoint, const OdGeVector3d &dirToNextPoint)=0

void	pointCloudProc2 (OdGiConveyorContext pContext, const OdGiPointCloud &pCloud, const OdGiPointCloudFilter pFilter)

virtual void	pointCloudProc (const OdGiPointCloud &pCloud, const OdGiPointCloudFilter *pFilter=NULL)=0

virtual void	edgeProc (const OdGiEdge2dArray &edges, const OdGeMatrix3d *pXform=0)=0

Protected Member Functions
	OdGsExtAccum ()

Protected Member Functions inherited from OdGiConveyorNode
	OdGiConveyorNode ()

Additional Inherited Members
Public Types inherited from OdGiConveyorGeometry
enum	ETtfCharProcFlags { kTtfCharProcEnable = 1 , kTtfCharProcBoundBlock = 2 }

enum	EConveyorBoundaryInfoFlags { kBoundaryProcXform = 1 , kBoundaryProcXformNonUni = 2 , kBoundaryProcProjection = 4 , kBoundaryProcClip = 8 , kBoundaryProcClipFull = 16 }

Static Public Member Functions inherited from OdGiExtAccum
static void	textExtents (OdGiConveyorContext pDrawContext, const OdGiTextStyle &textStyle, const OdChar pStr, int nLength, OdUInt32 raw, OdGePoint3d &minExt, OdGePoint3d &maxExt, OdGePoint3d pEndPos=NULL, OdGeExtents3d pExactExtents=NULL)

Static Public Member Functions inherited from OdRxObject
static OdRxObjectPtr	cast (const OdRxObject *pointer)

static OdRxClass *	desc ()

Protected Types inherited from OdGsConveyorNodeBase
typedef OdArray< OdGiConveyorOutput , OdMemoryAllocator< OdGiConveyorOutput > >	SourceNodeArray

Protected Attributes inherited from OdGsConveyorNodeBase
SourceNodeArray	m_sources

OdGiConveyorGeometry *	m_pDestGeom

Detailed Description

Wrapper extensions accumulator class adopted for Gs.

Corresponding C++ library: TD_Gs

Definition at line 126 of file GsExtAccum.h.

Constructor & Destructor Documentation

◆ OdGsExtAccum()

OdGsExtAccum::OdGsExtAccum ( )

protected

Member Function Documentation

◆ addExtents()

virtual void OdGsExtAccum::addExtents ( const OdGeExtents3d & extents )

virtual

Adds the specified extents to the the accumulated extents for the OdGiConveyorGeometry object associated with this object.

Parameters

extents [out] Extents to be added.

Implements OdGiExtAccum.

◆ addLineweight()

void OdGsExtAccum::addLineweight ( OdDb::LineWeight lwd )

Replaces lineweight of this object with the passed lineweight if the passed lineweight has greater width.

Parameters

lw	[in] Lineweight.

◆ baseView()

OdGsViewImpl * OdGsExtAccum::baseView ( )

inline

Retrieves a pointer to a base view.

Definition at line 165 of file GsExtAccum.h.

◆ circleProc() [1/2]

virtual void OdGsExtAccum::circleProc	(	const OdGePoint3d &	center,
		double	radius,
		const OdGeVector3d &	normal,
		const OdGeVector3d *	pExtrusion = `0`
	)

virtual

Process circle data.

Parameters

center	[in] Center point.
radius	[in] Radius.
normal	[in] Normal vector.
pExtrusion	[in] Pointer to the extrusion vector.

Remarks: The extrusion vector specifies the direction and distance of the extrusion.

See also: <link tv_geometry_circles.html, Work with Circles>

Implements OdGiConveyorGeometry.

◆ circleProc() [2/2]

virtual void OdGsExtAccum::circleProc	(	const OdGePoint3d &	firstPoint,
		const OdGePoint3d &	secondPoint,
		const OdGePoint3d &	thirdPoint,
		const OdGeVector3d *	pExtrusion = `0`
	)

virtual

Process circle data.

Parameters

firstPoint	[in] First point of a 3-point circle.
secondPoint	[in] Second point of a 3-point circle.
thirdPoint	[in] Third point of a 3-point circle.
pExtrusion	[in] Pointer to the extrusion vector.

Remarks: If firstPoint, secondPoint, and thirdPoint are specified, they cannot be colinear and no two can be coincident.

See also: <link tv_geometry_circles.html, Work with Circles>

Implements OdGiConveyorGeometry.

◆ circularArcProc() [1/2]

virtual void OdGsExtAccum::circularArcProc	(	const OdGePoint3d &	center,
		double	radius,
		const OdGeVector3d &	normal,
		const OdGeVector3d &	startVector,
		double	sweepAngle,
		OdGiArcType	arcType = `kOdGiArcSimple`,
		const OdGeVector3d *	pExtrusion = `0`
	)

virtual

Processes circular arc data.

Parameters

center	[in] Center point.
radius	[in] Radius.
normal	[in] Normal vector.
startVector	[in] Defines the start of this arc.
sweepAngle	[in] Angle that defines the arc.
arcType	[in] Arc type.
pExtrusion	[in] Pointer to the extrusion vector.

Remarks: arcType must be one of the following:

Value Description kOdGiArcSimple 0 Unfilled. kOdGiArcSector 1 Filled area bounded by the arc and its center. kOdGiArcChord 2 Filled area bounded by the arc and its end points

The extrusion vector specifies the direction and distance of the extrusion.

Remarks: All angles are expressed in radians.

See also: <link tv_geometry_arcs.html, Work with Arcs>

Implements OdGiConveyorGeometry.

◆ circularArcProc() [2/2]

virtual void OdGsExtAccum::circularArcProc	(	const OdGePoint3d &	firstPoint,
		const OdGePoint3d &	secondPoint,
		const OdGePoint3d &	thirdPoint,
		OdGiArcType	arcType = `kOdGiArcSimple`,
		const OdGeVector3d *	pExtrusion = `0`
	)

virtual

Processes circular arc data.

Parameters

firstPoint	[in] First point of a 3-point arc.
secondPoint	[in] Second point of a 3-point arc.
thirdPoint	[in] Third point of a 3-point arc.
arcType	[in] Arc type.
pExtrusion	[in] Pointer to the extrusion vector.

Remarks: If firstPoint, secondPoint, and thirdPoint are specified, they cannot be colinear and no two can be coincident.

See also: <link tv_geometry_arcs.html, Work with Arcs>

Implements OdGiConveyorGeometry.

◆ edgeProc()

void OdGsExtAccum::edgeProc	(	const OdGiEdge2dArray &	edges,
		const OdGeMatrix3d *	pXform = `0`
	)

virtual

Processes hatch boundary.

Parameters

edges	[in] 2d curves array.
pXform	[in] Optional boundary transform matrix.

Implements OdGiConveyorGeometry.

◆ ellipArcProc()

virtual void OdGsExtAccum::ellipArcProc	(	const OdGeEllipArc3d &	ellipArc,
		const OdGePoint3d *	endPointOverrides = `0`,
		OdGiArcType	arcType = `kOdGiArcSimple`,
		const OdGeVector3d *	pExtrusion = `0`
	)

virtual

Processes OdGeEllipArc3d data.

Parameters

ellipArc	[in] Elliptical arc.
endPointOverrides	[in] Array of points to be used as the first and last points of the vectorized arc.
arcType	[in] Arc type.
pExtrusion	[in] Pointer to the extrusion vector.

Remarks: arcType must be one of the following:

Value Description kOdGiArcSimple 0 Unfilled. kOdGiArcSector 1 Filled area bounded by the arc and its center. kOdGiArcChord 3 Filled area bounded by the arc and its end points

The extrusion vector specifies the direction and distance of the extrusion.

See also: <link tv_geometry_arcs.html, Work with Arcs>

Implements OdGiConveyorGeometry.

◆ geometry()

virtual OdGiConveyorGeometry & OdGsExtAccum::geometry ( )

virtual

Returns the OdGiConveyorGeometry object associated with this object.

Returns: a reference to the OdGiConveyorGeometry instance.

Remarks: This instance contains the functions that can be used by an entity to vectorize itself.

Implements OdGiExtAccum.

◆ getExtents()

virtual bool OdGsExtAccum::getExtents ( OdGeExtents3d & extents ) const

virtual

Retrieves the accumulated extents for the OdGiConveyorGeometry object associated with this object.

Parameters

extents [out] Receives the extents.

Returns: true if extents is valid, false otherwise.

Implements OdGiExtAccum.

◆ getLineweight()

OdDb::LineWeight OdGsExtAccum::getLineweight ( ) const

Returns lineweight of this object.

◆ giExtAccum() [1/2]

OdGiExtAccum * OdGsExtAccum::giExtAccum ( )

inline

Retrieves a pointer to the underlying OdGiExtAccum object.

Definition at line 149 of file GsExtAccum.h.

◆ giExtAccum() [2/2]

const OdGiExtAccum * OdGsExtAccum::giExtAccum ( ) const

inline

Retrieves a pointer to the underlying OdGiExtAccum object.

Definition at line 154 of file GsExtAccum.h.

◆ input()

virtual OdGiConveyorInput & OdGsExtAccum::input ( )

virtual

Returns the input from this ConveyorNode object.

Implements OdGiConveyorNode.

◆ meshProc()

virtual void OdGsExtAccum::meshProc	(	OdInt32	numRows,
		OdInt32	numColumns,
		const OdGePoint3d *	vertexList,
		const OdGiEdgeData *	pEdgeData = `0`,
		const OdGiFaceData *	pFaceData = `0`,
		const OdGiVertexData *	pVertexData = `0`
	)

virtual

Processes mesh data.

Parameters

numRows	[in] Number of rows.
numColumns	[in] Number of columns.
vertexList	[in] Array of vertices.
pEdgeData	[in] Pointer to additional edge data.
pFaceData	[in] Pointer to additional face data.
pVertexData	[in] Pointer to additional vertex data.

See also: OdGiEdgeData OdGiFaceData OdGiVertexData Vectorization Primitives; <link tv_geometry_meshes.html, Work with Meshes>

Implements OdGiConveyorGeometry.

◆ metafileProc()

virtual void OdGsExtAccum::metafileProc	(	const OdGePoint3d &	origin,
		const OdGeVector3d &	u,
		const OdGeVector3d &	v,
		const OdGiMetafile *	pMetafile,
		bool	dcAligned = `true`,
		bool	allowClipping = `false`
	)

virtual

Processes metafile data.

Parameters

origin	[in] Metafile origin.
u	[in] Metafile width vector.
v	[in] Metafile height vector.
pMetafile	[in] Pointer to the metafile object.
dcAligned	[in] reserved.
allowClipping	[in] reserved.

Implements OdGiConveyorGeometry.

◆ nurbsProc()

virtual void OdGsExtAccum::nurbsProc ( const OdGeNurbCurve3d & nurbsCurve )

virtual

Processes OdGeNurbCurve3d data.

Parameters

nurbsCurve [in] NURBS curve data.

See also: <link tv_geometry_nurbs.html, Work with NURBS>

Implements OdGiConveyorGeometry.

◆ ODRX_DECLARE_MEMBERS()

OdGsExtAccum::ODRX_DECLARE_MEMBERS ( OdGsExtAccum )

◆ optionalGeometry()

OdGiConveyorGeometry * OdGsExtAccum::optionalGeometry ( )

virtual

Retrieves a pointer to optional geometry.

Implements OdGsConveyorNodeBase.

◆ output()

virtual OdGiConveyorOutput & OdGsExtAccum::output ( )

virtual

Returns the output from this ConveyorNode object.

Implements OdGiConveyorNode.

◆ plineContainBulges()

virtual bool OdGsExtAccum::plineContainBulges ( ) const

virtual

Checks whether pline primitives contain bulges.

Returns: true if any of input pline primitives contain bulges, false otherwise.

Implements OdGiExtAccum.

◆ plineProc()

virtual void OdGsExtAccum::plineProc	(	const OdGiPolyline &	polyline,
		const OdGeMatrix3d *	pXfm = `0`,
		OdUInt32	fromIndex = `0`,
		OdUInt32	numSegs = `0`
	)

virtual

Processes OdGiPolyline data.

Parameters

polyline	[in] Polyline data to be processed.
pXfm	[in] Pointer to a transformation matrix.
fromIndex	[in] Index of the first segment to be processed.
numSegs	[in] Number of segments to be processed.

Remarks: numSegs == 0 indicates all segments starting at fromIndex are to be processed.

See also: <link tv_geometry_lines.html, Work with Lines>

Implements OdGiConveyorGeometry.

◆ pointCloudProc()

virtual void OdGsExtAccum::pointCloudProc	(	const OdGiPointCloud &	pCloud,
		const OdGiPointCloudFilter *	pFilter = `NULL`
	)

virtual

Processes point cloud object.

Parameters

pCloud	[in] Point cloud object.
pFilter	[in] Optional set of point cloud object conveyor filters.

Implements OdGiConveyorGeometry.

◆ polygonProc()

virtual void OdGsExtAccum::polygonProc	(	OdInt32	numPoints,
		const OdGePoint3d *	vertexList,
		const OdGeVector3d *	pNormal = `0`,
		const OdGeVector3d *	pExtrusion = `0`
	)

virtual

Processes polygon data.

Parameters

numPoints	[in] Number of points.
vertexList	[in] Array of vertices.
pNormal	[in] Pointer to the normal vector.
pExtrusion	[in] Pointer to the extrusion vector.

Remarks: The extrusion vector specifies the direction and distance of the extrusion.

See also: <link tv_geometry_polygons.html, Work with Polygons>

Implements OdGiConveyorGeometry.

◆ polylineProc()

virtual void OdGsExtAccum::polylineProc	(	OdInt32	numPoints,
		const OdGePoint3d *	vertexList,
		const OdGeVector3d *	pNormal = `0`,
		const OdGeVector3d *	pExtrusion = `0`,
		OdGsMarker	baseSubEntMarker = `-1`
	)

virtual

Processes simple polyline data.

Parameters

numPoints	[in] Number of points.
vertexList	[in] Array of vertices.
pNormal	[in] Pointer to the normal vector.
pExtrusion	[in] Pointer to the extrusion vector.
baseSubEntMarker	[in] Currently unused.

Remarks: The extrusion vector specifies the direction and distance of the extrusion.

See also: <link tv_geometry_lines.html, Work with Lines>

Implements OdGiConveyorGeometry.

◆ polypointProc()

virtual void OdGsExtAccum::polypointProc	(	OdInt32	numPoints,
		const OdGePoint3d *	vertexList,
		const OdCmEntityColor *	pColors,
		const OdCmTransparency *	pTransparency = `0`,
		const OdGeVector3d *	pNormals = `0`,
		const OdGeVector3d *	pExtrusions = `0`,
		const OdGsMarker *	pSubEntMarkers = `0`,
		OdInt32	nPointSize = `0`
	)

virtual

Processes array of points.

Parameters

numPoints	[in] Number of points.
vertexList	[in] Array of vertices.
pColors	[in] Pointer to point colors.
pTransparency	[in] Pointer to point transparency.
pNormals	[in] Array of normal vectors.
pExtrusions	[in] Array of vectors that defines extrusions.
pSubEntMarkers	[in] Array of sub-entity markers.
nPointSize	[in] Points size.

Remarks: The extrusion vectors specifies the direction and distance of the extrusion.

Implements OdGiConveyorGeometry.

◆ rasterImageProc()

virtual void OdGsExtAccum::rasterImageProc	(	const OdGePoint3d &	origin,
		const OdGeVector3d &	u,
		const OdGeVector3d &	v,
		const OdGiRasterImage *	pImage,
		const OdGePoint2d *	uvBoundary,
		OdUInt32	numBoundPts,
		bool	transparency = `false`,
		double	brightness = `50.0`,
		double	contrast = `50.0`,
		double	fade = `0.0`
	)

virtual

Processes raster images data.

Parameters

origin	[in] Lower-left corner.
u	[in] Image width vector.
v	[in] Image height vector.
pImage	[in] Pointer to the RasterImage object.
uvBoundary	[in] Array of image boundary points (may not be null).
numBoundPts	[in] Number of boundary points.
transparency	[in] True if and only if image transparency is on.
brightness	[in] Image brightness [0.0 .. 100.0].
contrast	[in] Image contrast [0.0 .. 100.0].
fade	[in] Image fade value [0.0 .. 100.0].

See also: <link tv_geometry_raster_images.html, Work with Raster Image Geometry Data>

Implements OdGiConveyorGeometry.

◆ rayProc()

virtual void OdGsExtAccum::rayProc	(	const OdGePoint3d &	basePoint,
		const OdGePoint3d &	throughPoint
	)

virtual

Processes Ray data.

Parameters

basePoint	[in] Base point.
throughPoint	[in] Through point

Remarks: A Ray is a semi-infinite line that starts at the basePoint, and passes through the throughPoint.

See also: <link tv_geometry_lines.html, Work with Lines>

Implements OdGiConveyorGeometry.

◆ resetExtents()

virtual void OdGsExtAccum::resetExtents ( const OdGeExtents3d & newExtents = OdGeExtents3d() )

virtual

Resets the accumulated extents for the OdGiConveyorGeometry object associated with this object.

Parameters

newExtents [out] New extents.

Implements OdGiExtAccum.

◆ rowOfDotsProc()

virtual void OdGsExtAccum::rowOfDotsProc	(	OdInt32	numPoints,
		const OdGePoint3d &	startPoint,
		const OdGeVector3d &	dirToNextPoint
	)

virtual

Processes a row of points.

Parameters

numPoints	[in] Number of points.
startPoint	[in] First point to draw.
dirToNextPoint	[in] Offset to next point.

Implements OdGiConveyorGeometry.

◆ setBaseView()

virtual void OdGsExtAccum::setBaseView ( OdGsViewImpl * pBaseVV )

virtual

Setup current OdGsViewImpl object for optional use of additional information into extents calculations.

Parameters

pBaseVV [in] Pointer to the view

◆ setDeviation() [1/2]

virtual void OdGsExtAccum::setDeviation ( const OdGeDoubleArray & deviations )

inlinevirtual

Sets max deviation for curve tessellation.

Parameters

deviations [in] Deviation values for curve tessellation.

Implements OdGiExtAccum.

Definition at line 221 of file GsExtAccum.h.

◆ setDeviation() [2/2]

virtual void OdGsExtAccum::setDeviation ( const OdGiDeviation * pDeviation )

inlinevirtual

Sets deviation object to obtain max deviation for curve tessellation.

Parameters

pDeviation [in] Pointer to the deviation object.

Implements OdGiExtAccum.

Definition at line 231 of file GsExtAccum.h.

◆ setDrawContext()

virtual void OdGsExtAccum::setDrawContext ( OdGiConveyorContext * pDrawContext )

virtual

Sets the draw context associated with this object.

Parameters

pDrawContext [in] Pointer to the draw context.

Implements OdGiExtAccum.

◆ setExtentsProc()

virtual void OdGsExtAccum::setExtentsProc	(	const OdGePoint3d *	,
		bool	= `true`
	)

virtual

Sets geometric extents.

Reimplemented from OdGiConveyorGeometry.

◆ shapeProc()

virtual void OdGsExtAccum::shapeProc	(	const OdGePoint3d &	position,
		const OdGeVector3d &	direction,
		const OdGeVector3d &	upVector,
		int	shapeNumber,
		const OdGiTextStyle *	pTextStyle,
		const OdGeVector3d *	pExtrusion = `0`
	)

virtual

Processes shape data.

Parameters

position	[in] Position of the shape.
direction	[in] Baseline direction of the shape.
upVector	[in] Up vector for the shape.
shapeNumber	[in] Shape number.
pTextStyle	[in] Pointer to the TextStyle for the shape.
pExtrusion	[in] Pointer to the extrusion vector.

Remarks: The extrusion vector specifies the direction and distance of the extrusion.

Implements OdGiConveyorGeometry.

◆ shellProc()

virtual void OdGsExtAccum::shellProc	(	OdInt32	numVertices,
		const OdGePoint3d *	vertexList,
		OdInt32	faceListSize,
		const OdInt32 *	faceList,
		const OdGiEdgeData *	pEdgeData = `0`,
		const OdGiFaceData *	pFaceData = `0`,
		const OdGiVertexData *	pVertexData = `0`
	)

virtual

Processes shell data.

Parameters

numVertices	[in] Number of vertices.
vertexList	[in] Array of vertices.
faceListSize	[in] Number of entries in faceList.
faceList	[in] Array of numbers that define the faces.
pEdgeData	[in] Pointer to additional edge data.
pFaceData	[in] Pointer to additional face data.
pVertexData	[in] Pointer to additional vertex data.

See also: Vectorization Primitives; <link tv_geometry_shells.html, Work with Shells>

Implements OdGiConveyorGeometry.

◆ textProc()

virtual void OdGsExtAccum::textProc	(	const OdGePoint3d &	position,
		const OdGeVector3d &	direction,
		const OdGeVector3d &	upVector,
		const OdChar *	msg,
		OdInt32	numBytes,
		bool	raw,
		const OdGiTextStyle *	pTextStyle,
		const OdGeVector3d *	pExtrusion = `0`
	)

virtual

Processes text data.

Parameters

position	[in] Position of the text.
direction	[in] Baseline direction of the text.
upVector	[in] Up vector for the text.
msg	[in] Text string.
numBytes	[in] Number of bytes in msg.
raw	[in] If and only if true, escape sequences, such as %P, will not be converted to special characters.
pTextStyle	[in] Pointer to the TextStyle for the text.
pExtrusion	[in] Pointer to the extrusion vector.

Remarks: The extrusion vector specifies the direction and distance of the extrusion.

See also: <link tv_geometry_text.html, Work with Text>

Implements OdGiConveyorGeometry.

◆ textProc2()

virtual void OdGsExtAccum::textProc2	(	const OdGePoint3d &	position,
		const OdGeVector3d &	direction,
		const OdGeVector3d &	upVector,
		const OdChar *	msg,
		OdInt32	numBytes,
		bool	raw,
		const OdGiTextStyle *	pTextStyle,
		const OdGeVector3d *	pExtrusion = `0`,
		const OdGeExtents3d *	extentsBox = `0`
	)

virtual

Processes text data.

Parameters

position	[in] Position of the text.
direction	[in] Baseline direction of the text.
upVector	[in] Up vector for the text.
msg	[in] Text string.
numBytes	[in] Number of bytes in msg.
raw	[in] Flag that specifies whether escape sequences, such as %P, should not be converted to special characters.
pTextStyle	[in] Pointer to the TextStyle for the text.
pExtrusion	[in] Pointer to the extrusion vector.

Remarks: The extrusion vector specifies the direction and distance of the extrusion.

See also: <link tv_geometry_text.html, Work with Text>

Reimplemented from OdGiConveyorGeometry.

◆ xlineProc()

virtual void OdGsExtAccum::xlineProc	(	const OdGePoint3d &	firstPoint,
		const OdGePoint3d &	secondPoint
	)

virtual

Processes Xline data.

Parameters

firstPoint	[in] First point.
secondPoint	[in] Second point.

Remarks: An Xline is an infinite line passing through the specified points.

See also: <link tv_geometry_lines.html, Work with Lines>

Implements OdGiConveyorGeometry.

The documentation for this class was generated from the following file:

GsExtAccum.h

Public Member Functions

Protected Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ OdGsExtAccum()

Member Function Documentation

◆ addExtents()

◆ addLineweight()

◆ baseView()

◆ circleProc() [1/2]

◆ circleProc() [2/2]

◆ circularArcProc() [1/2]

◆ circularArcProc() [2/2]

◆ edgeProc()

◆ ellipArcProc()

◆ geometry()

◆ getExtents()

◆ getLineweight()

◆ giExtAccum() [1/2]

◆ giExtAccum() [2/2]

◆ input()

◆ meshProc()

◆ metafileProc()

◆ nurbsProc()

◆ ODRX_DECLARE_MEMBERS()

◆ optionalGeometry()

◆ output()

◆ plineContainBulges()

◆ plineProc()

◆ pointCloudProc()

◆ polygonProc()

◆ polylineProc()

◆ polypointProc()

◆ rasterImageProc()

◆ rayProc()

◆ resetExtents()

◆ rowOfDotsProc()

◆ setBaseView()

◆ setDeviation() [1/2]

◆ setDeviation() [2/2]

◆ setDrawContext()

◆ setExtentsProc()

◆ shapeProc()

◆ shellProc()

◆ textProc()

◆ textProc2()

◆ xlineProc()