#include <GeRay3d.h>

Inheritance diagram for OdGeRay3d:

Public Member Functions
	OdGeRay3d ()

	OdGeRay3d (const OdGeRay3d &line)

	OdGeRay3d (const OdGePoint3d &point, const OdGeVector3d &vect)

	OdGeRay3d (const OdGePoint3d &point1, const OdGePoint3d &point2)

OdGeRay3d &	set (const OdGePoint3d &point, const OdGeVector3d &vect)

OdGeRay3d &	set (const OdGePoint3d &point1, const OdGePoint3d &point2)

OdGeRay3d &	operator= (const OdGeRay3d &line)

Public Member Functions inherited from OdGeLinearEnt3d
bool	intersectWith (const OdGeLinearEnt3d &line, OdGePoint3d &intPt, const OdGeTol &tol=OdGeContext::gTol) const

bool	intersectWith (const OdGePlanarEnt &plane, OdGePoint3d &intPnt, const OdGeTol &tol=OdGeContext::gTol) const

bool	projIntersectWith (const OdGeLinearEnt3d &line, const OdGeVector3d &projDir, OdGePoint3d &pntOnThisLine, OdGePoint3d &pntOnOtherLine, const OdGeTol &tol=OdGeContext::gTol) const

bool	overlap (const OdGeLinearEnt3d &line, OdGeLinearEnt3d *&overlap, const OdGeTol &tol=OdGeContext::gTol) const

	TD_USING (OdGeCurve3d::isOn)

bool	isOn (const OdGePlane &plane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isParallelTo (const OdGeLinearEnt3d &line, const OdGeTol &tol=OdGeContext::gTol) const

bool	isParallelTo (const OdGePlanarEnt &plane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isPerpendicularTo (const OdGeLinearEnt3d &line, const OdGeTol &tol=OdGeContext::gTol) const

bool	isPerpendicularTo (const OdGePlanarEnt &plane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isColinearTo (const OdGeLinearEnt3d &line, const OdGeTol &tol=OdGeContext::gTol) const

void	getPerpPlane (const OdGePoint3d &point, OdGePlane &plane) const

OdGePoint3d	pointOnLine () const

OdGeVector3d	direction () const

void	getLine (OdGeLine3d &line) const

OdGeLinearEnt3d &	operator= (const OdGeLinearEnt3d &line)

Public Member Functions inherited from OdGeCurve3d
void	getInterval (OdGeInterval &interval) const

void	getInterval (OdGeInterval &interval, OdGePoint3d &start, OdGePoint3d &end) const

OdGeCurve3d &	reverseParam ()

OdGeCurve3d &	setInterval ()

bool	setInterval (const OdGeInterval &interval)

double	distanceTo (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

double	distanceTo (const OdGeCurve3d &curve, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	closestPointTo (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	closestPointTo (const OdGeCurve3d &curve, OdGePoint3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	closestPointTo (const OdGePoint3d &point, double &param, const OdGeInterval *range, const OdGeTol &tol=OdGeContext::gTol) const

void	getClosestPointTo (const OdGePoint3d &point, OdGePointOnCurve3d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getClosestPointTo (const OdGeCurve3d &curve, OdGePointOnCurve3d &pntOnThisCrv, OdGePointOnCurve3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	projClosestPointTo (const OdGePoint3d &point, const OdGeVector3d &projectDirection, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	projClosestPointTo (const OdGeCurve3d &curve, const OdGeVector3d &projectDirection, OdGePoint3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getProjClosestPointTo (const OdGePoint3d &point, const OdGeVector3d &projectDirection, OdGePointOnCurve3d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getProjClosestPointTo (const OdGeCurve3d &curve, const OdGeVector3d &projectDirection, OdGePointOnCurve3d &pntOnThisCrv, OdGePointOnCurve3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

bool	getNormalPoint (const OdGePoint3d &point, OdGePointOnCurve3d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const

OdGeBoundBlock3d	boundBlock () const

OdGeBoundBlock3d	boundBlock (const OdGeInterval &range) const

OdGeBoundBlock3d	orthoBoundBlock () const

OdGeBoundBlock3d	orthoBoundBlock (const OdGeInterval &range) const

OdGeExtents3d	getGeomExtents (const OdGeInterval &range=OdGeInterval(), const OdGeMatrix3d *coordSystem=NULL) const

OdGeEntity3d *	project (const OdGePlane &projectionPlane, const OdGeVector3d &projectDirection, const OdGeTol &tol=OdGeContext::gTol) const

OdGeEntity3d *	orthoProject (const OdGePlane &projectionPlane, const OdGeTol &tol=OdGeContext::gTol) const

	TD_USING (OdGeEntity3d::isOn)

bool	isOn (const OdGePoint3d &point, double &param, const OdGeTol &tol=OdGeContext::gTol) const

bool	isOn (double param, const OdGeTol &tol=OdGeContext::gTol) const

double	paramOf (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

double	paramOf (const OdGePoint3d &point, const OdGeInterval *range, const OdGeTol &tol=OdGeContext::gTol) const

void	getTrimmedOffset (double distance, const OdGeVector3d &planeNormal, OdGeCurve3dPtrArray &offsetCurveList, OdGe::OffsetCrvExtType extensionType=OdGe::kFillet, const OdGeTol &tol=OdGeContext::gTol) const

bool	isClosed (const OdGeTol &tol=OdGeContext::gTol) const

bool	isPlanar (OdGePlane &plane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isLinear (OdGeLine3d &line, const OdGeTol &tol=OdGeContext::gTol) const

bool	isCoplanarWith (const OdGeCurve3d &curve, OdGePlane &plane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isPeriodic (double &period) const

double	length (double fromParam, double toParam, double tol=OdGeContext::gTol.equalPoint()) const

double	length (double tol=OdGeContext::gTol.equalPoint()) const

double	paramAtLength (double datumParam, double length, bool posParamDir=true, double tol=OdGeContext::gTol.equalPoint()) const

bool	area (double startParam, double endParam, double &value, const OdGeTol &tol=OdGeContext::gTol) const

bool	isDegenerate (OdGe::EntityId &degenerateType, const OdGeTol &tol=OdGeContext::gTol) const

bool	isDegenerate (OdGeEntity3d *&pConvertedEntity, const OdGeTol &tol=OdGeContext::gTol) const

void	getSplitCurves (double param, OdGeCurve3d &piece1, OdGeCurve3d &piece2) const

bool	explode (OdGeCurve3dPtrArray &explodedCurves, OdGeIntArray &newExplodedCurves, const OdGeInterval *pInterval=NULL) const

void	getLocalClosestPoints (const OdGePoint3d &point, OdGePointOnCurve3d &approxPntOnThisCrv, const OdGeInterval *pInterval1=NULL, const OdGeTol &tol=OdGeContext::gTol) const

void	getLocalClosestPoints (const OdGeCurve3d &curve, OdGePointOnCurve3d &approxPntOnThisCrv, OdGePointOnCurve3d &approxPntOnOtherCrv, const OdGeInterval pInterval1=NULL, const OdGeInterval pInterval2=NULL, const OdGeTol &tol=OdGeContext::gTol) const

bool	hasStartPoint (OdGePoint3d &startPoint) const

bool	hasEndPoint (OdGePoint3d &endPoint) const

bool	hasMidPoint (OdGePoint3d &point, double coef=0.5) const

OdGePoint3d	midPoint (double coef=0.5) const

OdGePoint3d	evalPoint (double param) const

OdGePoint3d	evalPoint (double param, int numDeriv, OdGeVector3dArray &derivatives) const

void	getSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray &paramArray, bool forceResampling=false) const

void	getSamplePoints (int numSample, OdGePoint3dArray &pointArray) const

void	getSamplePoints (int numSample, OdGePoint3dArray &pointArray, OdGeDoubleArray &paramArray) const

OdGeCurve3d &	operator= (const OdGeCurve3d &curve)

void	getSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray *paramArray=NULL) const

void	getSamplePoints (const OdGeInterval paramInterval, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray pParamArray=NULL) const

void	appendSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray *pParamArray=NULL) const

void	appendSamplePoints (int numSample, OdGePoint3dArray &pointArray, OdGeDoubleArray *pParamArray=NULL) const

void	appendSamplePoints (const OdGeInterval paramInterval, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray pParamArray=NULL) const

OdGeCurve2d *	convertTo2d (const OdGeTol &tol=OdGeContext::gTol, bool sameParametrization=false) const

Public Member Functions inherited from OdGeEntity3d
	ODRX_HEAP_OPERATORS ()

	~OdGeEntity3d ()

bool	isKindOf (OdGe::EntityId entType) const

OdGe::EntityId	type () const

OdGeEntity3d *	copy () const

OdGeEntity3d &	operator= (const OdGeEntity3d &entity)

bool	operator== (const OdGeEntity3d &entity) const

bool	operator!= (const OdGeEntity3d &entity) const

bool	isEqualTo (const OdGeEntity3d &object, const OdGeTol &tol=OdGeContext::gTol) const

OdGeEntity3d &	transformBy (const OdGeMatrix3d &xfm)

OdGeEntity3d &	translateBy (const OdGeVector3d &translateVec)

OdGeEntity3d &	rotateBy (double angle, const OdGeVector3d &vect, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)

OdGeEntity3d &	mirror (const OdGePlane &plane)

OdGeEntity3d &	scaleBy (double scaleFactor, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)

bool	isOn (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

Additional Inherited Members
Protected Member Functions inherited from OdGeLinearEnt3d
	OdGeLinearEnt3d ()

	OdGeLinearEnt3d (const OdGeLinearEnt3d &source)

Protected Member Functions inherited from OdGeCurve3d
	OdGeCurve3d ()

	OdGeCurve3d (const OdGeCurve3d &source)

Protected Member Functions inherited from OdGeEntity3d
	OdGeEntity3d ()

	OdGeEntity3d (const OdGeEntity3d &)

void	connectTo (OdGeEntity3dImpl *)

Detailed Description

This class represents semi-infinite lines in 3D space.

Corresponding C++ library: TD_Ge

See also: <link ge_OdGeRay, Working with Rays>

Definition at line 41 of file GeRay3d.h.

Constructor & Destructor Documentation

◆ OdGeRay3d() [1/4]

OdGeRay3d::OdGeRay3d ( )

Default constructor for the OdGeRay3d class. Constructs a ray from the origin oriented along the X-axis.

◆ OdGeRay3d() [2/4]

OdGeRay3d::OdGeRay3d ( const OdGeRay3d & line )

Copy constructor for the OdGeRay3d class.

Parameters

line	[in] Object to be copied.

◆ OdGeRay3d() [3/4]

OdGeRay3d::OdGeRay3d	(	const OdGePoint3d &	point,
		const OdGeVector3d &	vect
	)

Constructor for the OdGeRay3d class.

Parameters

point	[in] A 3D point from which the ray is casted.
vect	[in] The direction of ray.

Remarks: The constructor constructs a ray that is casted from the specified point to a specified direction.

◆ OdGeRay3d() [4/4]

OdGeRay3d::OdGeRay3d	(	const OdGePoint3d &	point1,
		const OdGePoint3d &	point2
	)

Constructor for the OdGeRay3d class.

Parameters

point1	[in] A 3D point from which the ray is casted.
point2	[in] A 3D point through which the ray passes.

Remarks: The constructor constructs a ray that is casted from the specified point, the ray passes through the point2.

Member Function Documentation

◆ operator=()

OdGeRay3d & OdGeRay3d::operator= ( const OdGeRay3d & line )

Assignment operator for the OdGeRay3d object.

Parameters

line	[in] Ray to assign.

Returns: Reference to this OdGeRay3d object.

◆ set() [1/2]

OdGeRay3d & OdGeRay3d::set	(	const OdGePoint3d &	point,
		const OdGeVector3d &	vect
	)

Sets the parameters for this ray according to the arguments.

Parameters

point	[in] A 3D point from which the ray is casted.
vect	[in] The direction of ray.

Returns: Reference to this ray.

Remarks: point and vect construct a semi-infinite line starting point with a direction of vect. vect cannot have a zero length.

◆ set() [2/2]

OdGeRay3d & OdGeRay3d::set	(	const OdGePoint3d &	point1,
		const OdGePoint3d &	point2
	)

Sets the parameters for this ray according to the arguments.

Parameters

point1	[in] A 3D point from which the ray is casted.
point2	[in] A 3D point through which the ray passes.

Returns: Reference to this ray.

Remarks: point1 and point2 construct a semi-infinite line starting at point1, and passing through point2. The points cannot be coincident.

The documentation for this class was generated from the following file:

GeRay3d.h

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ OdGeRay3d() [1/4]

◆ OdGeRay3d() [2/4]

◆ OdGeRay3d() [3/4]

◆ OdGeRay3d() [4/4]

Member Function Documentation

◆ operator=()

◆ set() [1/2]

◆ set() [2/2]