#include <GeBoundBlock3d.h>

Inheritance diagram for OdGeBoundBlock3d:

Public Member Functions
	OdGeBoundBlock3d ()

	OdGeBoundBlock3d (const OdGePoint3d &base, const OdGeVector3d &side1, const OdGeVector3d &side2, const OdGeVector3d &side3)

	OdGeBoundBlock3d (const OdGePoint3d &point1, const OdGePoint3d &point2)

	OdGeBoundBlock3d (const OdGeBoundBlock3d &source)

void	getMinMaxPoints (OdGePoint3d &p1, OdGePoint3d &p2) const

void	get (OdGePoint3d &base, OdGeVector3d &side1, OdGeVector3d &side2, OdGeVector3d &side3) const

OdGeBoundBlock3d &	set (const OdGePoint3d &p1, const OdGePoint3d &p2)

OdGeBoundBlock3d &	set (const OdGePoint3d &base, const OdGeVector3d &side1, const OdGeVector3d &side2, const OdGeVector3d &side3)

OdGeBoundBlock3d &	extend (const OdGePoint3d &point)

OdGeBoundBlock3d &	swell (double distance)

bool	contains (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

bool	isDisjoint (const OdGeBoundBlock3d &block, const OdGeTol &tol=OdGeContext::gTol) const

bool	isBox () const

OdGeBoundBlock3d &	setToBox (bool toBox)

OdGeBoundBlock3d &	operator= (const OdGeBoundBlock3d &block)

OdGePoint3d	minPoint () const

OdGePoint3d	maxPoint () const

OdGePoint3d	center () const

void	setToBoxOrtho (const OdGeVector3d &dir1, const OdGeVector3d &dir2, const OdGeVector3d &dir3)

void	setToBoxOrtho ()

Public Member Functions inherited from OdGeEntity3d
	ODRX_HEAP_OPERATORS ()

	~OdGeEntity3d ()

bool	isKindOf (OdGe::EntityId entType) const

OdGe::EntityId	type () const

OdGeEntity3d *	copy () const

OdGeEntity3d &	operator= (const OdGeEntity3d &entity)

bool	operator== (const OdGeEntity3d &entity) const

bool	operator!= (const OdGeEntity3d &entity) const

bool	isEqualTo (const OdGeEntity3d &object, const OdGeTol &tol=OdGeContext::gTol) const

OdGeEntity3d &	transformBy (const OdGeMatrix3d &xfm)

OdGeEntity3d &	translateBy (const OdGeVector3d &translateVec)

OdGeEntity3d &	rotateBy (double angle, const OdGeVector3d &vect, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)

OdGeEntity3d &	mirror (const OdGePlane &plane)

OdGeEntity3d &	scaleBy (double scaleFactor, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)

bool	isOn (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

Additional Inherited Members
Protected Member Functions inherited from OdGeEntity3d
	OdGeEntity3d ()

	OdGeEntity3d (const OdGeEntity3d &)

void	connectTo (OdGeEntity3dImpl *)

Detailed Description

This class implements 3D bounding volumes.

Corresponding C++ library: TD_Ge

See also: <link ge_OdGeBoundBlock3D.html, Working with Bounding Blocks>

Definition at line 42 of file GeBoundBlock3d.h.

Constructor & Destructor Documentation

◆ OdGeBoundBlock3d() [1/4]

OdGeBoundBlock3d::OdGeBoundBlock3d ( )

Parameters

point1	[in] First point of a coordinate-aligned block.
point2	[in] Second point of a coordinate-aligned block.
base	[in] Base of parallelepiped bounding block.
side1	[in] First side of parallelepiped bounding block.
side2	[in] Second side of parallelepiped bounding block.
side3	[in] Third side of parallelepiped bounding block.
source	[in] Object to be cloned.

Remarks: The default constructor constructs a parallelepiped reduced to the coordinate origin.

A parallelepiped is a parallelogram extruded in an arbitrary direction.

◆ OdGeBoundBlock3d() [2/4]

OdGeBoundBlock3d::OdGeBoundBlock3d	(	const OdGePoint3d &	base,
		const OdGeVector3d &	side1,
		const OdGeVector3d &	side2,
		const OdGeVector3d &	side3
	)

◆ OdGeBoundBlock3d() [3/4]

OdGeBoundBlock3d::OdGeBoundBlock3d	(	const OdGePoint3d &	point1,
		const OdGePoint3d &	point2
	)

◆ OdGeBoundBlock3d() [4/4]

OdGeBoundBlock3d::OdGeBoundBlock3d ( const OdGeBoundBlock3d & source )

Member Function Documentation

◆ center()

OdGePoint3d OdGeBoundBlock3d::center ( ) const

Returns the center of the bounding block.

◆ contains()

bool OdGeBoundBlock3d::contains	(	const OdGePoint3d &	point,
		const OdGeTol &	tol = `OdGeContext::gTol`
	)		const

Returns true if and only if this point is contained in the bounding block.

Parameters

point [in] Any 3D point.

◆ extend()

OdGeBoundBlock3d& OdGeBoundBlock3d::extend ( const OdGePoint3d & point )

Extends the bounding block to contain the specified point.

Parameters

point [in] Any 3D point.

◆ get()

void OdGeBoundBlock3d::get	(	OdGePoint3d &	base,
		OdGeVector3d &	side1,
		OdGeVector3d &	side2,
		OdGeVector3d &	side3
	)		const

Returns base and sides of bounding block.

Parameters

base	[out] Receives the base of the bounding box.
side1	[out] Receives the first side.
side2	[out] Receives the second side.
side3	[out] Receives the third side.

◆ getMinMaxPoints()

void OdGeBoundBlock3d::getMinMaxPoints	(	OdGePoint3d &	p1,
		OdGePoint3d &	p2
	)		const

Returns the extents of the bounding block.

Parameters

p1	[out] Receives the first corner of the extents.
p2	[out] Receives the second corner of the extents.

◆ isBox()

bool OdGeBoundBlock3d::isBox ( ) const

Returns true if and only if this bounding block is a coordinate-aligned box.

◆ isDisjoint()

bool OdGeBoundBlock3d::isDisjoint	(	const OdGeBoundBlock3d &	block,
		const OdGeTol &	tol = `OdGeContext::gTol`
	)		const

Returns true if and only if specified bounding block does not intersect this bounding block.

Parameters

block [in] Any 3D bounding block.

◆ maxPoint()

OdGePoint3d OdGeBoundBlock3d::maxPoint ( ) const

◆ minPoint()

OdGePoint3d OdGeBoundBlock3d::minPoint ( ) const

◆ operator=()

OdGeBoundBlock3d& OdGeBoundBlock3d::operator= ( const OdGeBoundBlock3d & block )

◆ set() [1/2]

OdGeBoundBlock3d& OdGeBoundBlock3d::set	(	const OdGePoint3d &	base,
		const OdGeVector3d &	side1,
		const OdGeVector3d &	side2,
		const OdGeVector3d &	side3
	)

Sets the bounding block to a parallelepiped bounding block.

Parameters

base	[in] Base of parallelepiped bounding block.
side1	[in] First side of parallelepiped bounding block.
side2	[in] Second side of parallelepiped bounding block.
side3	[in] Third side of parallelepiped bounding block.

◆ set() [2/2]

OdGeBoundBlock3d& OdGeBoundBlock3d::set	(	const OdGePoint3d &	p1,
		const OdGePoint3d &	p2
	)

Sets the bounding block to a coordinate-aligned box.

Parameters

p1	[in] First point of a coordinate-aligned box.
p2	[in] Second point of a coordinate-aligned box.

◆ setToBox()

OdGeBoundBlock3d& OdGeBoundBlock3d::setToBox ( bool toBox )

Sets this bounding block to a coordinate-aligned box, or a parallelogram bounding block. Returns a reference to this bounding block.

Parameters

toBox [in] If true, sets this bounding block to a coordinate-aligned otherwise, sets it to a parallelepiped bounding block.

◆ setToBoxOrtho() [1/2]

void OdGeBoundBlock3d::setToBoxOrtho ( )

inline

Call setToBox(true) if axes is parallel to world coordinate space axes.

Definition at line 219 of file GeBoundBlock3d.h.

◆ setToBoxOrtho() [2/2]

void OdGeBoundBlock3d::setToBoxOrtho	(	const OdGeVector3d &	dir1,
		const OdGeVector3d &	dir2,
		const OdGeVector3d &	dir3
	)

inline

Call setToBox(true) if axes is parallel to world coordinate space axes.

Definition at line 201 of file GeBoundBlock3d.h.

◆ swell()

OdGeBoundBlock3d& OdGeBoundBlock3d::swell ( double distance )

Moves the walls of the bounding block the specified distance.

Parameters

distance [in] Distance.

The documentation for this class was generated from the following file:

GeBoundBlock3d.h

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ OdGeBoundBlock3d() [1/4]

◆ OdGeBoundBlock3d() [2/4]

◆ OdGeBoundBlock3d() [3/4]

◆ OdGeBoundBlock3d() [4/4]

Member Function Documentation

◆ center()

◆ contains()

◆ extend()

◆ get()

◆ getMinMaxPoints()

◆ isBox()

◆ isDisjoint()

◆ maxPoint()

◆ minPoint()

◆ operator=()

◆ set() [1/2]

◆ set() [2/2]

◆ setToBox()

◆ setToBoxOrtho() [1/2]

◆ setToBoxOrtho() [2/2]

◆ swell()