#include <GeCurveSurfInt.h>

Inheritance diagram for OdGeCurveSurfInt:

Public Member Functions
	OdGeCurveSurfInt ()

	OdGeCurveSurfInt (const OdGeCurve3d &curve, const OdGeSurface &surface, const OdGeTol &tol=OdGeContext::gTol)

	OdGeCurveSurfInt (const OdGeCurveSurfInt &source)

const OdGeCurve3d *	curve () const

const OdGeSurface *	surface () const

OdGeTol	tolerance () const

int	numIntPoints (OdGeIntersectError &status) const

OdGePoint3d	intPoint (int intNum, OdGeIntersectError &status) const

void	getIntParams (int intNum, double &param1, OdGePoint2d &param2, OdGeIntersectError &status) const

void	getPointOnCurve (int intNum, OdGePointOnCurve3d &intPnt, OdGeIntersectError &status) const

void	getPointOnSurface (int intNum, OdGePointOnSurface &intPnt, OdGeIntersectError &status) const

void	getIntConfigs (int intNum, OdGe::csiConfig &lower, OdGe::csiConfig &higher, bool &smallAngle, OdGeIntersectError &status) const

OdGeCurveSurfInt &	set (const OdGeCurve3d &cvr, const OdGeSurface &surface, const OdGeTol &tol=OdGeContext::gTol)

OdGeCurveSurfInt &	operator= (const OdGeCurveSurfInt &crvSurfInt)

int	numResults (OdGeIntersectError &status) const

int	getDimension (int intNum, OdGeIntersectError &status) const

int	overlapCount (OdGeIntersectError &status) const

void	getOverlapRange (int intNum, OdGeInterval &range, OdGeIntersectError &status) const

OdGeCurve2d *	intParamCurve (int intNum, bool isExternal, OdGeIntersectError &status) const

Public Member Functions inherited from OdGeEntity3d
	ODRX_HEAP_OPERATORS ()

	~OdGeEntity3d ()

bool	isKindOf (OdGe::EntityId entType) const

OdGe::EntityId	type () const

OdGeEntity3d *	copy () const

OdGeEntity3d &	operator= (const OdGeEntity3d &entity)

bool	operator== (const OdGeEntity3d &entity) const

bool	operator!= (const OdGeEntity3d &entity) const

bool	isEqualTo (const OdGeEntity3d &object, const OdGeTol &tol=OdGeContext::gTol) const

OdGeEntity3d &	transformBy (const OdGeMatrix3d &xfm)

OdGeEntity3d &	translateBy (const OdGeVector3d &translateVec)

OdGeEntity3d &	rotateBy (double angle, const OdGeVector3d &vect, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)

OdGeEntity3d &	mirror (const OdGePlane &plane)

OdGeEntity3d &	scaleBy (double scaleFactor, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)

bool	isOn (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

Additional Inherited Members
Protected Member Functions inherited from OdGeEntity3d
	OdGeEntity3d ()

	OdGeEntity3d (const OdGeEntity3d &)

void	connectTo (OdGeEntity3dImpl *)

Detailed Description

This class represents intersections of 3D curves and surfaces. Currently not implemented.

Remarks: The intersection object links to curve and surface objects, but does not contain them. Calculation of the intersection is performed by a calling function, which owns the intersection output.

If one of the objects is deleted, the intersection must be recalculated.

Corresponding C++ library: TD_Ge

Definition at line 55 of file GeCurveSurfInt.h.

Constructor & Destructor Documentation

◆ OdGeCurveSurfInt() [1/3]

OdGeCurveSurfInt::OdGeCurveSurfInt ( )

Parameters

curve	[in] Any 3D curve.
surface	[in] Any surface.
tol	[in] Geometric tolerance.
source	[in] Object to be cloned.

◆ OdGeCurveSurfInt() [2/3]

OdGeCurveSurfInt::OdGeCurveSurfInt	(	const OdGeCurve3d &	curve,
		const OdGeSurface &	surface,
		const OdGeTol &	tol = `OdGeContext::gTol`
	)

◆ OdGeCurveSurfInt() [3/3]

OdGeCurveSurfInt::OdGeCurveSurfInt ( const OdGeCurveSurfInt & source )

Member Function Documentation

◆ curve()

const OdGeCurve3d* OdGeCurveSurfInt::curve ( ) const

Returns the 3D curve.

◆ getDimension()

int OdGeCurveSurfInt::getDimension	(	int	intNum,
		OdGeIntersectError &	status
	)		const

Returns a dimension of the specified intersection, and retrieves the status of the intersection.

Parameters

intNum	[in] The zero-based index of the intersection.
status	[out] Receives the status of the intersection.

Returns: A dimension of the specified intersection as an integer number

Remarks: Possible values for status are as follows:

@untitled table kXXOk kXXIndexOutOfRange kXXWrongDimensionAtIndex kXXUnknown

◆ getIntConfigs()

void OdGeCurveSurfInt::getIntConfigs	(	int	intNum,
		OdGe::csiConfig &	lower,
		OdGe::csiConfig &	higher,
		bool &	smallAngle,
		OdGeIntersectError &	status
	)		const

Returns the configurations on either side of the surface at the intersection.

Parameters

intNum	[in] The zero-based index of the intersection curve to return.
lower	[out] Unknown.
higher	[out] Unknown.
smallAngle	[out] Unknown.
status	[out] Receives the status of the intersection.

Remarks: Possible values for lower and higher are as follows:

@untitled table kXUnknown
kXOut
kXIn
kXTanOut
kXTanIn
kXCoincident
kXCoincidentUnbounded

Possible values for status are as follows:

@untitled table kXXOk kXXIndexOutOfRange kXXWrongDimensionAtIndex kXXUnknown

Remarks: Currently not implemented.

◆ getIntParams()

void OdGeCurveSurfInt::getIntParams	(	int	intNum,
		double &	param1,
		OdGePoint2d &	param2,
		OdGeIntersectError &	status
	)		const

Returns the parameters of the specified intersection point with respect to the curve and surface, and returns the status of the intersection.

Parameters

intNum	[in] The zero-based index of the intersection curve to return.
param1	[out] Receives the parameter of the intersection point with respect to the curve.
param2	[out] Receives the parameter pair of the intersection point with respect to the surface.
status	[out] Receives the status of the intersection.

Remarks: Possible values for status are as follows:

@untitled table kXXOk kXXIndexOutOfRange kXXWrongDimensionAtIndex kXXUnknown

Remarks: Currently not implemented.

◆ getOverlapRange()

void OdGeCurveSurfInt::getOverlapRange	(	int	intNum,
		OdGeInterval &	range,
		OdGeIntersectError &	status
	)		const

Retrieves the range for the curve for the specified overlap, and retrieves the status of the intersection.

Parameters

intNum	[in] The zero-based index of the overlap range to query.
range	[out] Receives the range of the curve for the specified overlap.
status	[out] Receives the status of the intersection.

Remarks: Possible values for status are as follows:

@untitled table kXXOk kXXIndexOutOfRange kXXWrongDimensionAtIndex kXXUnknown

◆ getPointOnCurve()

void OdGeCurveSurfInt::getPointOnCurve	(	int	intNum,
		OdGePointOnCurve3d &	intPnt,
		OdGeIntersectError &	status
	)		const

Returns the intersection point on the curve, and returns the status of the intersection.

Parameters

intNum	[in] The zero-based index of the intersection pooint to return.
intPnt	[out] Receives the specified intersection point on the curve.
status	[out] Receives the status of the intersection.

Remarks: Possible values for status are as follows:

@untitled table kXXOk kXXIndexOutOfRange kXXWrongDimensionAtIndex kXXUnknown

Remarks: Currently not implemented.

◆ getPointOnSurface()

void OdGeCurveSurfInt::getPointOnSurface	(	int	intNum,
		OdGePointOnSurface &	intPnt,
		OdGeIntersectError &	status
	)		const

Returns the intersection point on the surface, and returns the status of the intersection.

Parameters

intNum	[in] The zero-based index of the intersection point to return.
intPnt	[out] Receives the specified intersection point on the surface.
status	[out] Receives the status of the intersection.

Remarks: Possible values for status are as follows:

@untitled table kXXOk kXXIndexOutOfRange kXXWrongDimensionAtIndex kXXUnknown

Remarks: Currently not implemented.

◆ intParamCurve()

OdGeCurve2d* OdGeCurveSurfInt::intParamCurve	(	int	intNum,
		bool	isExternal,
		OdGeIntersectError &	status
	)		const

Returns the 2d curve representing the specified intersection and the status of the intersection.

Parameters

intNum	[in] The zero-based index of the intersection curve to return.
isExternal	[in] If true, returns a pointer of OdGeExternalCurve2d (not implemented).
status	[out] Receives the status of the intersection.

Returns: A pointer to OdGeCurve2d.

Remarks: If the intersection is not a 2d curve, returns NULL. If some intersection is queried more than once, returns NULL and sets status to kXXUnknown.

Possible values for status are as follows:

@untitled table kXXOk kXXIndexOutOfRange kXXWrongDimensionAtIndex kXXUnknown

◆ intPoint()

OdGePoint3d OdGeCurveSurfInt::intPoint	(	int	intNum,
		OdGeIntersectError &	status
	)		const

Returns a 3D point representing the specified intersection, and returns the status of the intersection.

Parameters

intNum	[in] The zero-based index of the intersection curve to return.
status	[out] Receives the status of the intersection.

Returns: Returns NULL if the dimension of this intersection is not 0 (not a 3D point).

Remarks: Possible values for status are as follows:

@untitled table kXXOk kXXIndexOutOfRange kXXWrongDimensionAtIndex kXXUnknown

Remarks: Currently not implemented.

◆ numIntPoints()

int OdGeCurveSurfInt::numIntPoints ( OdGeIntersectError & status ) const

Returns the number of intersections between the curve and the surface, and returns the status of the intersection.

Parameters

status [out] Receives the status of the intersection.

Remarks: Possible values for status are as follows:

@untitled table kXXOk kXXIndexOutOfRange kXXWrongDimensionAtIndex kXXUnknown

Remarks: Currently not implemented.

◆ numResults()

int OdGeCurveSurfInt::numResults ( OdGeIntersectError & status ) const

Returns the number of intersections between the curve and the surface, and retrieves the status of the intersection.

Parameters

status [out] Receives the status of the intersection.

Remarks: Possible values for status are as follows:

@untitled table kXXOk kXXIndexOutOfRange kXXWrongDimensionAtIndex kXXUnknown

◆ operator=()

OdGeCurveSurfInt& OdGeCurveSurfInt::operator= ( const OdGeCurveSurfInt & crvSurfInt )

◆ overlapCount()

int OdGeCurveSurfInt::overlapCount ( OdGeIntersectError & status ) const

Retrieves the number of interval of overlaps between the curve and the surface, and retrieves the status of the intersection.

Parameters

status [out] Receives the status of the intersection.

Remarks: Possible values for status are as follows:

@untitled table kXXOk kXXIndexOutOfRange kXXWrongDimensionAtIndex kXXUnknown

◆ set()

OdGeCurveSurfInt& OdGeCurveSurfInt::set	(	const OdGeCurve3d &	cvr,
		const OdGeSurface &	surface,
		const OdGeTol &	tol = `OdGeContext::gTol`
	)

Specifies the 3D curve, surface, and tolerance for determining intersections.

Parameters

curve	[in] Any 3D curve.
surface	[in] Any surface.
tol	[in] Geometric tolerance.

◆ surface()

const OdGeSurface* OdGeCurveSurfInt::surface ( ) const

Returns the surface.

◆ tolerance()

OdGeTol OdGeCurveSurfInt::tolerance ( ) const

Returns the tolerance for determining intersections.

The documentation for this class was generated from the following file:

GeCurveSurfInt.h

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ OdGeCurveSurfInt() [1/3]

◆ OdGeCurveSurfInt() [2/3]

◆ OdGeCurveSurfInt() [3/3]

Member Function Documentation

◆ curve()

◆ getDimension()

◆ getIntConfigs()

◆ getIntParams()

◆ getOverlapRange()

◆ getPointOnCurve()

◆ getPointOnSurface()

◆ intParamCurve()

◆ intPoint()

◆ numIntPoints()

◆ numResults()

◆ operator=()

◆ overlapCount()

◆ set()

◆ surface()

◆ tolerance()