#include <AECDbStairStyle.h>

Inheritance diagram for AECDbStairStyle:

Public Member Functions
bool	IsAllowVaryComponents () const

void	SetIsAllowVaryComponents (bool bAllow)

bool	IsDisplayRisers () const

void	SetIsDisplayRisers (bool bDisplay)

bool	IsDisplayTreads () const

void	SetIsDisplayTreads (bool bDisplay)

double	GetTreadThickness () const

void	SetTreadThickness (double dThickness)

double	GetRiserThickness () const

void	SetRiserThickness (double dThickness)

double	GetLandingThickness () const

void	SetLandingThickness (double dThickness)

double	GetAdditionalWidth () const

void	SetAdditionalWidth (double dWidth)

double	GetNosingLength () const

void	SetNosingLength (double dLength)

bool	IsSlopingRisers () const

void	SetIsSlopingRisers (bool bSloping)

bool	IsAllowVaryLandingExtensions () const

void	SetIsAllowVaryLandingExtensions (bool bAllow)

double	GetDistanceToFirstTreadUp () const

void	SetDistanceToFirstTreadUp (double dDistance)

double	GetDistanceToFirstTreadDown () const

void	SetDistanceToFirstTreadDown (double dDistance)

bool	IsAddTreadDepthUp () const

void	SetIsAddTreadDepthUp (bool bAdd)

bool	IsAddTreadDepthDown () const

void	SetIsAddTreadDepthDown (bool bAdd)

double	GetLandingLength () const

void	SetLandingLength (double dLength)

AECDefs::StairLandingLocation	GetLandingLocation () const

void	SetLandingLocation (AECDefs::StairLandingLocation eLocation)

bool	IsExtendToMergeStringers () const

void	SetIsExtendToMergeStringers (bool bExtend)

bool	IsExtendToPreventRisersSittingUnderLandings () const

void	SetIsExtendToPreventRisersSittingUnderLandings (bool bExtend)

OdUInt32	GetComponentCount () const

AECStairCompDefSubPtr	GetComponentByIndex (OdUInt32 iIndex) const

AECImpArraySubPtr	GetComponents () const

bool	IsUseRuleBasedCalculator () const

void	SetIsUseRuleBasedCalculator (bool bUse)

double	GetRuleMinLimit () const

void	SetRuleMinLimit (double dLimit)

double	GetRuleMaxLimit () const

void	SetRuleMaxLimit (double dLimit)

double	GetRiserHeightMult () const

void	SetRiserHeightMult (double dMult)

double	GetTreadDepthMult () const

void	SetTreadDepthMult (double dMult)

const OdDbObjectId &	GetTreadMaterial () const

void	SetTreadMaterial (const OdDbObjectId &id)

const OdDbObjectId &	GetRiserMaterial () const

void	SetRiserMaterial (const OdDbObjectId &id)

const OdDbObjectId &	GetLandingMaterial () const

void	SetLandingMaterial (const OdDbObjectId &id)

double	GetMinSlopeRiserHeight () const

void	SetMinSlopeRiserHeight (double dHeight)

double	GetOptSlopeRiserHeight () const

void	SetOptSlopeRiserHeight (double dHeight)

double	GetMaxSlopeRiserHeight () const

void	SetMaxSlopeRiserHeight (double dHeight)

double	GetMinSlopeTreadDepth () const

void	SetMinSlopeTreadDepth (double dDepth)

double	GetOptSlopeTreadDepth () const

void	SetOptSlopeTreadDepth (double dDepth)

double	GetMaxSlopeTreadDepth () const

void	SetMaxSlopeTreadDepth (double dDepth)

Public Member Functions inherited from AECDbDictRecord
const OdString &	GetDictRecordDescription () const

void	SetDictRecordDescription (const OdString &strDescription)

AECClassificationArraySubPtr	GetClassificationArray () const

OdString	GetName () const

Public Member Functions inherited from AECDbObject
virtual void	subClose ()

virtual OdResult	dwgInFields (OdDbDwgFiler *pFiler)

virtual void	dwgOutFields (OdDbDwgFiler *pFiler) const

virtual void	dxfOut (OdDbDxfFiler *pFiler) const

virtual void	audit (OdDbAuditInfo *pAuditInfo)

const OdString &	GetDescription () const

void	SetDescription (const OdString &strDescription)

OdUInt32	GetOverrideCount () const

AECOverrideSubPtr	GetOverrideByIndex (OdUInt32 iIndex) const

AECImpArraySubPtr	GetOverrides ()

OdDbObjectId	GetCurrentDispProps (const OdDbObjectId &idDispRep)

OdDbObjectId	OverrideDispProps (const OdDbObjectId &idDispRep, bool bCopyContents=true)

void	RemoveDispProps (const OdDbObjectId &idDispRep)

Public Member Functions inherited from OdDbObject
	ODDB_DECLARE_MEMBERS (OdDbObject)

	~OdDbObject ()

void	addRef ()

void	release ()

long	numRefs () const

OdDbObjectId	objectId () const

OdDbHandle	getDbHandle () const

OdDbHandle	handle () const

OdDbObjectId	ownerId () const

virtual void	setOwnerId (OdDbObjectId ownerId)

OdDbDatabase *	database () const

void	createExtensionDictionary ()

OdDbObjectId	extensionDictionary () const

bool	releaseExtensionDictionary ()

OdDbXrecordPtr	createXrecord (const OdString &xrecordName, OdDb::DuplicateRecordCloning style=OdDb::kDrcIgnore)

void	upgradeOpen ()

void	downgradeOpen ()

void	cancel ()

virtual OdResult	subOpen (OdDb::OpenMode mode)

OdResult	erase (bool eraseIt=true)

virtual OdResult	subErase (bool erasing)

void	handOverTo (OdDbObject *pNewObject, bool keepXData=true, bool keepExtDict=true)

virtual void	subHandOverTo (OdDbObject *pNewObject)

void	swapIdWith (OdDbObjectId otherId, bool swapXdata=false, bool swapExtDict=false)

virtual void	subSwapIdWith (const OdDbObjectId &otherId, bool swapXdata=false, bool swapExtDict=false)

void	dwgIn (OdDbDwgFiler *pFiler)

void	dwgOut (OdDbDwgFiler *pFiler) const

virtual OdResult	dxfIn (OdDbDxfFiler *pFiler)

virtual OdResult	dxfInFields (OdDbDxfFiler *pFiler)

virtual void	dxfOutFields (OdDbDxfFiler *pFiler) const

virtual OdResult	dxfInFields_R12 (OdDbDxfFiler *pFiler)

virtual void	dxfOutFields_R12 (OdDbDxfFiler *pFiler) const

virtual OdDb::DuplicateRecordCloning	mergeStyle () const

virtual OdResBufPtr	xData (const OdString &regappName=OdString::kEmpty) const

virtual void	setXData (const OdResBuf *pRb)

bool	isEraseStatusToggled () const

bool	isErased () const

bool	isReadEnabled () const

bool	isWriteEnabled () const

bool	isNotifyEnabled () const

bool	isModified () const

bool	isModifiedXData () const

bool	isModifiedGraphics () const

bool	isNewObject () const

bool	isNotifying () const

bool	isUndoing () const

bool	isReallyClosing () const

bool	isDBRO () const

void	assertReadEnabled () const

void	assertWriteEnabled (bool autoUndo=true, bool recordModified=true)

void	assertNotifyEnabled () const

void	disableUndoRecording (bool disable)

bool	isUndoRecordingDisabled () const

OdDbDwgFiler *	undoFiler ()

virtual void	applyPartialUndo (OdDbDwgFiler pUndoFiler, OdRxClass pClassObj)

void	addReactor (OdDbObjectReactor *pReactor) const

void	removeReactor (OdDbObjectReactor *pReactor) const

virtual void	addPersistentReactor (const OdDbObjectId &objId)

virtual void	removePersistentReactor (const OdDbObjectId &objId)

bool	hasPersistentReactor (const OdDbObjectId &objId) const

OdDbObjectIdArray	getPersistentReactors () const

OdDbObjectReactorArray	getTransientReactors () const

virtual void	recvPropagateModify (const OdDbObject *pSubObj)

virtual void	xmitPropagateModify () const

ODRX_SEALED_VIRTUAL OdDbObjectPtr	deepClone (OdDbIdMapping &ownerIdMap, OdDbObject *pOwner, bool bPrimary=true) const ODRX_SEALED

ODRX_SEALED_VIRTUAL OdDbObjectPtr	wblockClone (OdDbIdMapping &ownerIdMap, OdDbObject *pOwner, bool bPrimary=true) const ODRX_SEALED

virtual void	appendToOwner (OdDbIdPair &idPair, OdDbObject *pOwnerObject, OdDbIdMapping &ownerIdMap)

void	setOdDbObjectIdsInFlux ()

bool	isOdDbObjectIdsInFlux () const

virtual void	copied (const OdDbObject pObject, const OdDbObject pNewObject)

virtual void	erased (const OdDbObject *pObject, bool erasing=true)

virtual void	goodbye (const OdDbObject *pObject)

virtual void	openedForModify (const OdDbObject *pObject)

virtual void	modified (const OdDbObject *pObject)

virtual void	subObjModified (const OdDbObject pObject, const OdDbObject pSubObj)

virtual void	modifyUndone (const OdDbObject *pObject)

virtual void	modifiedXData (const OdDbObject *pObject)

virtual void	unappended (const OdDbObject *pObject)

virtual void	reappended (const OdDbObject *pObject)

bool	isAProxy () const

virtual void	objectClosed (const OdDbObjectId &objectId)

virtual void	modifiedGraphics (const OdDbObject *pObject)

virtual void	copyFrom (const OdRxObject *pSource)

bool	hasSaveVersionOverride () const

void	setHasSaveVersionOverride (bool hasSaveVersionOverride)

virtual OdDb::DwgVersion	getObjectSaveVersion (const OdDbFiler pFiler, OdDb::MaintReleaseVer pMaintVer=0) const

virtual OdDbObjectPtr	decomposeForSave (OdDb::DwgVersion ver, OdDbObjectId &replaceId, bool &exchangeXData)

virtual OdDbObjectPtr	decomposeForSave (OdDb::SaveType format, OdDb::DwgVersion ver, OdDbObjectId &replaceId, bool &exchangeXData)

void	convertForSave (OdDb::DwgVersion ver)

virtual void	composeForLoad (OdDb::SaveType format, OdDb::DwgVersion version, OdDbAuditInfo *pAuditInfo)

virtual OdGiDrawable *	drawable ()

virtual OdUInt32	subSetAttributes (OdGiDrawableTraits *pTraits) const

virtual bool	subWorldDraw (OdGiWorldDraw *pWd) const

virtual void	subViewportDraw (OdGiViewportDraw *pVd) const

virtual bool	isPersistent () const

virtual OdDbStub *	id () const

ODRX_SEALED_VIRTUAL OdResult	getClassID (void *pClsid) const ODRX_SEALED

void	setGsNode (OdGsCache *pNode)

OdGsCache *	gsNode () const

void	xDataTransformBy (const OdGeMatrix3d &xfm)

bool	hasFields () const

OdDbObjectId	getField (const OdString &fieldName) const

OdDbObjectPtr	getField (const OdString &fieldName, OdDb::OpenMode mode) const

virtual OdDbObjectId	setField (const OdString &fieldName, OdDbField *pField)

virtual OdResult	removeField (OdDbObjectId fieldId)

virtual OdDbObjectId	removeField (const OdString &fieldName)

OdDbObjectId	getFieldDictionary () const

OdDbObjectPtr	getFieldDictionary (OdDb::OpenMode mode) const

virtual OdRxClass *	saveAsClass (OdRxClass *pClass) const

Public Member Functions inherited from OdGiDrawable
	ODRX_DECLARE_MEMBERS (OdGiDrawable)

virtual DrawableType	drawableType () const

ODRX_SEALED_VIRTUAL OdUInt32	setAttributes (OdGiDrawableTraits *pTraits) const ODRX_SEALED

ODRX_SEALED_VIRTUAL bool	worldDraw (OdGiWorldDraw *pWd) const ODRX_SEALED

ODRX_SEALED_VIRTUAL void	viewportDraw (OdGiViewportDraw *pVd) const ODRX_SEALED

ODRX_SEALED_VIRTUAL OdUInt32	viewportDrawLogicalFlags (OdGiViewportDraw *pVd) const ODRX_SEALED

virtual OdResult	getGeomExtents (OdGeExtents3d &extents) const

ODRX_SEALED_VIRTUAL OdUInt32	regenSupportFlags () const ODRX_SEALED

Public Member Functions inherited from OdRxObject
	ODRX_HEAP_OPERATORS ()

	OdRxObject ()

virtual	~OdRxObject ()

virtual OdRxObject *	queryX (const OdRxClass *pClass) const

virtual OdRxObject *	x (const OdRxClass *pClass) const

virtual OdRxClass *	isA () const

bool	isKindOf (const OdRxClass *pClass) const

virtual OdRxObjectPtr	clone () const

virtual OdRx::Ordering	comparedTo (const OdRxObject *pOther) const

virtual bool	isEqualTo (const OdRxObject *pOther) const

Additional Inherited Members
Public Types inherited from OdGiDrawable
enum	SetAttributesFlags { kDrawableNone = 0 , kDrawableIsAnEntity = 1 , kDrawableUsesNesting = 2 , kDrawableIsCompoundObject = 4 , kDrawableViewIndependentViewportDraw = 8 , kDrawableIsInvisible = 16 , kDrawableHasAttributes = 32 , kDrawableRegenTypeDependantGeometry = 64 , kDrawableIsDimension = (kDrawableIsAnEntity + kDrawableIsCompoundObject + 128) , kDrawableRegenDraw = 256 , kDrawableStandardDisplaySingleLOD = 512 , kDrawableShadedDisplaySingleLOD = 1024 , kDrawableViewDependentViewportDraw = 2048 , kDrawableBlockDependentViewportDraw = 4096 , kDrawableIsExternalReference = 8192 , kDrawableNotPlottable = 16384 , kLastFlag = kDrawableNotPlottable }

enum	DrawableType { kGeometry = 0 , kDistantLight = 1 , kPointLight = 2 , kSpotLight = 3 , kAmbientLight , kSolidBackground , kGradientBackground , kImageBackground , kGroundPlaneBackground , kViewport , kWebLight , kSkyBackground , kImageBasedLightingBackground }

Static Public Member Functions inherited from OdRxObject
static OdRxObjectPtr	cast (const OdRxObject *pointer)

static OdRxClass *	desc ()

Protected Member Functions inherited from OdDbObject
	OdDbObject ()

virtual OdResult	subGetClassID (void *pClsid) const

virtual OdDbObjectPtr	subDeepClone (OdDbIdMapping &ownerIdMap, OdDbObject *pOwner, bool bPrimary) const

virtual OdDbObjectPtr	subWblockClone (OdDbIdMapping &ownerIdMap, OdDbObject *pOwner, bool bPrimary) const

Protected Member Functions inherited from OdGiDrawable
	OdGiDrawable ()

virtual OdUInt32	subViewportDrawLogicalFlags (OdGiViewportDraw *vd) const

virtual OdUInt32	subRegenSupportFlags () const

Protected Attributes inherited from AECDbObject
AECImpObjPtr	m_pImpObject

AECImpArrayPtr	m_pOverrides

Protected Attributes inherited from OdDbObject
OdDbObjectImpl *	m_pImpl

Detailed Description

Stair Style.

Definition at line 39 of file AECDbStairStyle.h.

Member Function Documentation

◆ GetAdditionalWidth()

double AECDbStairStyle::GetAdditionalWidth ( ) const

Returns landing additional width.

◆ GetComponentByIndex()

AECStairCompDefSubPtr AECDbStairStyle::GetComponentByIndex ( OdUInt32 iIndex ) const

Returns component definition by index.

◆ GetComponentCount()

OdUInt32 AECDbStairStyle::GetComponentCount ( ) const

Returns the number of components.

◆ GetComponents()

AECImpArraySubPtr AECDbStairStyle::GetComponents ( ) const

Returns the array of stair components.

◆ GetDistanceToFirstTreadDown()

double AECDbStairStyle::GetDistanceToFirstTreadDown ( ) const

Returns distance to first tread down.

◆ GetDistanceToFirstTreadUp()

double AECDbStairStyle::GetDistanceToFirstTreadUp ( ) const

Returns distance to first tread up.

◆ GetLandingLength()

double AECDbStairStyle::GetLandingLength ( ) const

Returns landing length.

◆ GetLandingLocation()

AECDefs::StairLandingLocation AECDbStairStyle::GetLandingLocation ( ) const

Returns landing location.

◆ GetLandingMaterial()

const OdDbObjectId& AECDbStairStyle::GetLandingMaterial ( ) const

Returns the Object ID of the material definition (AECDbMaterialDef) for landing.

◆ GetLandingThickness()

double AECDbStairStyle::GetLandingThickness ( ) const

Returns landing thickness.

◆ GetMaxSlopeRiserHeight()

double AECDbStairStyle::GetMaxSlopeRiserHeight ( ) const

Returns riser height for maximum slope.

◆ GetMaxSlopeTreadDepth()

double AECDbStairStyle::GetMaxSlopeTreadDepth ( ) const

Returns tread depth for maximum slope. (!) MinTreadDepth and MaxThreadDepth were swapped up to Teigha� Architecture 2.5.1.

◆ GetMinSlopeRiserHeight()

double AECDbStairStyle::GetMinSlopeRiserHeight ( ) const

Returns riser height for minimum slope.

◆ GetMinSlopeTreadDepth()

double AECDbStairStyle::GetMinSlopeTreadDepth ( ) const

Returns tread depth for minimum slope. (!) MinTreadDepth and MaxThreadDepth were swapped up to Teigha� Architecture 2.5.1.

◆ GetNosingLength()

double AECDbStairStyle::GetNosingLength ( ) const

Returns nosing length.

◆ GetOptSlopeRiserHeight()

double AECDbStairStyle::GetOptSlopeRiserHeight ( ) const

Returns riser height for optimal slope.

◆ GetOptSlopeTreadDepth()

double AECDbStairStyle::GetOptSlopeTreadDepth ( ) const

Returns tread depth for optimal slope.

◆ GetRiserHeightMult()

double AECDbStairStyle::GetRiserHeightMult ( ) const

Returns multiplier for riser height in rule.

◆ GetRiserMaterial()

const OdDbObjectId& AECDbStairStyle::GetRiserMaterial ( ) const

Returns the Object ID of the material definition (AECDbMaterialDef) for riser.

◆ GetRiserThickness()

double AECDbStairStyle::GetRiserThickness ( ) const

Returns riser thickness.

◆ GetRuleMaxLimit()

double AECDbStairStyle::GetRuleMaxLimit ( ) const

Returns rule maximum limit.

◆ GetRuleMinLimit()

double AECDbStairStyle::GetRuleMinLimit ( ) const

Returns rule minimum limit.

◆ GetTreadDepthMult()

double AECDbStairStyle::GetTreadDepthMult ( ) const

Returns multiplier for tread depth in rule.

◆ GetTreadMaterial()

const OdDbObjectId& AECDbStairStyle::GetTreadMaterial ( ) const

Returns the Object ID of the material definition (AECDbMaterialDef) for tread.

◆ GetTreadThickness()

double AECDbStairStyle::GetTreadThickness ( ) const

Returns tread thickness.

◆ IsAddTreadDepthDown()

bool AECDbStairStyle::IsAddTreadDepthDown ( ) const

Returns whether tread value is added down

◆ IsAddTreadDepthUp()

bool AECDbStairStyle::IsAddTreadDepthUp ( ) const

Returns whether tread value is added up.

◆ IsAllowVaryComponents()

bool AECDbStairStyle::IsAllowVaryComponents ( ) const

Returns whether components may vary for each stair.

◆ IsAllowVaryLandingExtensions()

bool AECDbStairStyle::IsAllowVaryLandingExtensions ( ) const

Returns whether landing extensions may vary for each stair.

◆ IsDisplayRisers()

bool AECDbStairStyle::IsDisplayRisers ( ) const

Retruns whether risers are displayed.

◆ IsDisplayTreads()

bool AECDbStairStyle::IsDisplayTreads ( ) const

Retruns whether treads are displayed.

◆ IsExtendToMergeStringers()

bool AECDbStairStyle::IsExtendToMergeStringers ( ) const

Returns whether landing is extended to merge flight stringers with landing stringers.

◆ IsExtendToPreventRisersSittingUnderLandings()

bool AECDbStairStyle::IsExtendToPreventRisersSittingUnderLandings ( ) const

Returns whether landing is extended to prevent risers and treads sitting under landing.

◆ IsSlopingRisers()

bool AECDbStairStyle::IsSlopingRisers ( ) const

Returns whether risers are sloping.

◆ IsUseRuleBasedCalculator()

bool AECDbStairStyle::IsUseRuleBasedCalculator ( ) const

Returns whether rule for tread / riser relation should be used for stair calculator data.

◆ SetAdditionalWidth()

void AECDbStairStyle::SetAdditionalWidth ( double dWidth )

Sets landing additional width.

◆ SetDistanceToFirstTreadDown()

void AECDbStairStyle::SetDistanceToFirstTreadDown ( double dDistance )

Sets distance to first tread down.

◆ SetDistanceToFirstTreadUp()

void AECDbStairStyle::SetDistanceToFirstTreadUp ( double dDistance )

Sets distance to first tread up.

◆ SetIsAddTreadDepthDown()

void AECDbStairStyle::SetIsAddTreadDepthDown ( bool bAdd )

Sets whether tread value is added down.

◆ SetIsAddTreadDepthUp()

void AECDbStairStyle::SetIsAddTreadDepthUp ( bool bAdd )

Sets whether tread value is added up.

◆ SetIsAllowVaryComponents()

void AECDbStairStyle::SetIsAllowVaryComponents ( bool bAllow )

Sets whether components may vary for each stair.

◆ SetIsAllowVaryLandingExtensions()

void AECDbStairStyle::SetIsAllowVaryLandingExtensions ( bool bAllow )

Sets whether landing extensions may vary for each stair.

◆ SetIsDisplayRisers()

void AECDbStairStyle::SetIsDisplayRisers ( bool bDisplay )

Sets whether risers are displayed.

◆ SetIsDisplayTreads()

void AECDbStairStyle::SetIsDisplayTreads ( bool bDisplay )

Sets whether treads are displayed.

◆ SetIsExtendToMergeStringers()

void AECDbStairStyle::SetIsExtendToMergeStringers ( bool bExtend )

Sets whether landing is extended to merge flight stringers with landing stringers.

◆ SetIsExtendToPreventRisersSittingUnderLandings()

void AECDbStairStyle::SetIsExtendToPreventRisersSittingUnderLandings ( bool bExtend )

Sets whether landing is extended to prevent risers and treads sitting under landing.

◆ SetIsSlopingRisers()

void AECDbStairStyle::SetIsSlopingRisers ( bool bSloping )

Sets whether risers are sloping.

◆ SetIsUseRuleBasedCalculator()

void AECDbStairStyle::SetIsUseRuleBasedCalculator ( bool bUse )

Sets whether rule for tread / riser relation should be used for stair calculator data.

◆ SetLandingLength()

void AECDbStairStyle::SetLandingLength ( double dLength )

Sets landing length.

◆ SetLandingLocation()

void AECDbStairStyle::SetLandingLocation ( AECDefs::StairLandingLocation eLocation )

Sets landing location.

◆ SetLandingMaterial()

void AECDbStairStyle::SetLandingMaterial ( const OdDbObjectId & id )

Sets the Object ID of the material definition (AECDbMaterialDef) for landing.

◆ SetLandingThickness()

void AECDbStairStyle::SetLandingThickness ( double dThickness )

Sets landing thickness.

◆ SetMaxSlopeRiserHeight()

void AECDbStairStyle::SetMaxSlopeRiserHeight ( double dHeight )

Sets riser height for maximum slope.

◆ SetMaxSlopeTreadDepth()

void AECDbStairStyle::SetMaxSlopeTreadDepth ( double dDepth )

Sets tread depth for maximum slope.

◆ SetMinSlopeRiserHeight()

void AECDbStairStyle::SetMinSlopeRiserHeight ( double dHeight )

Sets riser height for minimum slope.

◆ SetMinSlopeTreadDepth()

void AECDbStairStyle::SetMinSlopeTreadDepth ( double dDepth )

Sets tread depth for minimum slope.

◆ SetNosingLength()

void AECDbStairStyle::SetNosingLength ( double dLength )

Sets nosing length.

◆ SetOptSlopeRiserHeight()

void AECDbStairStyle::SetOptSlopeRiserHeight ( double dHeight )

Sets riser height for optimal slope.

◆ SetOptSlopeTreadDepth()

void AECDbStairStyle::SetOptSlopeTreadDepth ( double dDepth )

Sets tread depth for optimal slope.

◆ SetRiserHeightMult()

void AECDbStairStyle::SetRiserHeightMult ( double dMult )

Sets multiplier for riser height in rule.

◆ SetRiserMaterial()

void AECDbStairStyle::SetRiserMaterial ( const OdDbObjectId & id )

Sets the Object ID of the material definition (AECDbMaterialDef) for riser.

◆ SetRiserThickness()

void AECDbStairStyle::SetRiserThickness ( double dThickness )

Sets riser thickness.

◆ SetRuleMaxLimit()

void AECDbStairStyle::SetRuleMaxLimit ( double dLimit )

Sets rule maximum limit.

◆ SetRuleMinLimit()

void AECDbStairStyle::SetRuleMinLimit ( double dLimit )

Sets rule minimum limit.

◆ SetTreadDepthMult()

void AECDbStairStyle::SetTreadDepthMult ( double dMult )

Sets multiplier for tread depth in rule.

◆ SetTreadMaterial()

void AECDbStairStyle::SetTreadMaterial ( const OdDbObjectId & id )

Sets the Object ID of the material definition (AECDbMaterialDef) for tread.

◆ SetTreadThickness()

void AECDbStairStyle::SetTreadThickness ( double dThickness )

Sets tread thickness.

The documentation for this class was generated from the following file:

AECDbStairStyle.h

Public Member Functions

Additional Inherited Members