#include <GeExternalBoundedSurface.h>

Inheritance diagram for OdGeExternalBoundedSurface:

Public Member Functions
	OdGeExternalBoundedSurface ()

	OdGeExternalBoundedSurface (void *pSurfaceDef, OdGe::ExternalEntityKind surfaceKind, bool makeCopy=true)

	OdGeExternalBoundedSurface (const OdGeExternalBoundedSurface &source)

OdGe::ExternalEntityKind	externalSurfaceKind () const

bool	isDefined () const

void	getExternalSurface (void *&pSurfaceDef) const

void	getBaseSurface (OdGeSurface *&pSurfaceDef) const

void	getBaseSurface (OdGeExternalSurface &unboundedSurfaceDef) const

bool	isPlane () const

bool	isSphere () const

bool	isCylinder () const

bool	isCone () const

bool	isEllipCylinder () const

bool	isEllipCone () const

bool	isTorus () const

bool	isNurbs () const

bool	isExternalSurface () const

int	numContours () const

void	getContours (int &numContours, OdGeCurveBoundary *&contours) const

OdGeExternalBoundedSurface &	set (void *pSurfaceDef, OdGe::ExternalEntityKind surfaceKind, bool makeCopy=true)

bool	isOwnerOfSurface () const

OdGeExternalBoundedSurface &	setToOwnSurface ()

OdGeExternalBoundedSurface &	operator= (const OdGeExternalBoundedSurface &extBoundSurf)

Public Member Functions inherited from OdGeSurface
OdGePoint2d	paramOf (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

	TD_USING (OdGeEntity3d::isOn)

bool	isOn (const OdGePoint3d &point, OdGePoint2d &paramPoint, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	closestPointTo (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

void	getClosestPointTo (const OdGePoint3d &point, OdGePointOnSurface &pntOnSurface, const OdGeTol &tol=OdGeContext::gTol) const

double	distanceTo (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

bool	isNormalReversed () const

OdGeSurface &	reverseNormal ()

void	getEnvelope (OdGeInterval &intrvlU, OdGeInterval &intrvlV) const

bool	isClosedInU (const OdGeTol &tol=OdGeContext::gTol) const

bool	isClosedInV (const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	evalPoint (const OdGePoint2d &param) const

OdGePoint3d	evalPoint (const OdGePoint2d &param, int numDeriv, OdGeVector3dArray &derivatives) const

OdGePoint3d	evalPoint (const OdGePoint2d &param, int numDeriv, OdGeVector3dArray &derivatives, OdGeVector3d &normal) const

OdGeSurface &	operator= (const OdGeSurface &surf)

bool	project (const OdGePoint3d &p, OdGePoint3d &projP, const OdGeTol &tol=OdGeContext::gTol) const

bool	getReparameterization (bool &swapUV, double &uCoeffA, double &vCoeffA, double &uCoeffB, double &vCoeffB) const

void	setReparameterization (bool swapUV=false, double uCoeffA=1., double vCoeffA=1., double uCoeffB=0., double vCoeffB=0.)

void	getImplicitEnvelope (OdGeInterval &implicitIntrvlU, OdGeInterval &implicitIntrvlV) const

bool	setEnvelope (const OdGeInterval &realIntrvlU, const OdGeInterval &realIntrvlV)

void	getEnvelope (OdGeUvBox &uvbox) const

void	evaluate (const OdGePoint2d &param, int numDeriv, OdGeVector3d values, OdGeVector3d normal=NULL) const

OdGeExtents3d	getGeomExtents (const OdGeUvBox &range=OdGeUvBox(), const OdGeMatrix3d *coordSystem=NULL) const

OdGePoint2d	paramOf (const OdGePoint3d &point, const OdGeUvBox *uvBox, const OdGeTol &tol=OdGeContext::gTol) const

OdGeCurve3d *	makeIsoparamCurve (bool byU, double param) const

OdGeCurve3d *	makeIsoparamCurve (bool byU, double param, const OdGeInterval &interval) const

bool	getPoles (OdGeDoubleArray uParams, OdGeDoubleArray vParams, OdGePoint3dArray uPoints, OdGePoint3dArray vPoints, double tol=1e-13) const

Public Member Functions inherited from OdGeEntity3d
	ODRX_HEAP_OPERATORS ()

	~OdGeEntity3d ()

bool	isKindOf (OdGe::EntityId entType) const

OdGe::EntityId	type () const

OdGeEntity3d *	copy () const

OdGeEntity3d &	operator= (const OdGeEntity3d &entity)

bool	operator== (const OdGeEntity3d &entity) const

bool	operator!= (const OdGeEntity3d &entity) const

bool	isEqualTo (const OdGeEntity3d &object, const OdGeTol &tol=OdGeContext::gTol) const

OdGeEntity3d &	transformBy (const OdGeMatrix3d &xfm)

OdGeEntity3d &	translateBy (const OdGeVector3d &translateVec)

OdGeEntity3d &	rotateBy (double angle, const OdGeVector3d &vect, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)

OdGeEntity3d &	mirror (const OdGePlane &plane)

OdGeEntity3d &	scaleBy (double scaleFactor, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)

bool	isOn (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

Additional Inherited Members
Protected Member Functions inherited from OdGeSurface
	OdGeSurface ()

	OdGeSurface (const OdGeSurface &surf)

Protected Member Functions inherited from OdGeEntity3d
	OdGeEntity3d ()

	OdGeEntity3d (const OdGeEntity3d &)

void	connectTo (OdGeEntity3dImpl *)

Detailed Description

This class represents bounded surfaces, whose definitions are external to the OdGe library.

Remarks: Each instance of ns OdGeExternalBoundedSurface is comprosed of an instance of an OdExternalSurface and a collection of instances of OdGeCurveBoundary.

OdGeExternalBoundedSurface instances can be treated as any other OdGeSurface.

You can access the OdGeExternalBoundedSurface as a corresponding native OdGeSurface, if such a corresponding surface exists, or you may (more efficiently) access the external data in its native form.

One example of using OdGeExternalBoundedSurface is to access an ACIS surface.

Corresponding C++ library: TD_Ge

Definition at line 51 of file GeExternalBoundedSurface.h.

Constructor & Destructor Documentation

◆ OdGeExternalBoundedSurface() [1/3]

OdGeExternalBoundedSurface::OdGeExternalBoundedSurface ( )

Parameters

pSurfaceDef	[in] Pointer to the surface definition.
surfaceKind	[in] Information about system that created the surface.
makeCopy	[in] Makes a copy of curveDef.
source	[in] Object to be cloned.

Remarks: Without arguments, the constructor creates an empty instance.

Possible values for surfaceKind:

@untitled table kAcisEntity kExternalEntityUndefined

◆ OdGeExternalBoundedSurface() [2/3]

OdGeExternalBoundedSurface::OdGeExternalBoundedSurface	(	void *	pSurfaceDef,
		OdGe::ExternalEntityKind	surfaceKind,
		bool	makeCopy = `true`
	)

◆ OdGeExternalBoundedSurface() [3/3]

OdGeExternalBoundedSurface::OdGeExternalBoundedSurface ( const OdGeExternalBoundedSurface & source )

Member Function Documentation

◆ externalSurfaceKind()

OdGe::ExternalEntityKind OdGeExternalBoundedSurface::externalSurfaceKind ( ) const

Rerurns information about the system that created the surface.

Remarks: Possible values for externalSurfaceKind:

@untitled table kAcisEntity kExternalEntityUndefined

◆ getBaseSurface() [1/2]

void OdGeExternalBoundedSurface::getBaseSurface ( OdGeExternalSurface & unboundedSurfaceDef ) const

Returns the unbounded surface.

Parameters

unboundedSurfaceDef [out] Receives the unbounded surface definition.

◆ getBaseSurface() [2/2]

void OdGeExternalBoundedSurface::getBaseSurface ( OdGeSurface *& pSurfaceDef ) const

Returns the unbounded surface.

Parameters

pSurfaceDef [out] Receives a pointer to the unbounded surface definition.

Remarks: If called with a pointer to OdGeSurface, the OdExternalSurface will be converted to a native OdGeSurface, if possible.

◆ getContours()

void OdGeExternalBoundedSurface::getContours	(	int &	numContours,
		OdGeCurveBoundary *&	contours
	)		const

Returns an array of the contours on this surface.

Parameters

numContours	[out] Receives the number of contours on this surface.
contours	[out] Receives the array of contours.

◆ getExternalSurface()

void OdGeExternalBoundedSurface::getExternalSurface ( void *& pSurfaceDef ) const

Returns a copy of the raw surface definition.

Parameters

curveDef [out] Receives a pointer to a copy of the raw surface definition.

Remarks: It is up to the caller to delete the memory allocated.

◆ isCone()

bool OdGeExternalBoundedSurface::isCone ( ) const

Return true if and only if the unbounded base surface can be represented as an OdGeCone.

◆ isCylinder()

bool OdGeExternalBoundedSurface::isCylinder ( ) const

Return true if and only if the unbounded base surface can be represented as an OdGeCylinder.

◆ isDefined()

bool OdGeExternalBoundedSurface::isDefined ( ) const

Returns true if and only if the surface is defined (not an empty instance).

◆ isEllipCone()

bool OdGeExternalBoundedSurface::isEllipCone ( ) const

Return true if and only if the unbounded base surface can be represented as an OdGeEllipCone.

◆ isEllipCylinder()

bool OdGeExternalBoundedSurface::isEllipCylinder ( ) const

Return true if and only if the unbounded base surface can be represented as an OdGeEllipCylinder.

◆ isExternalSurface()

bool OdGeExternalBoundedSurface::isExternalSurface ( ) const

Return true if and only if the unbounded base surface cannot be represented as an native OdGeSurface.

◆ isNurbs()

bool OdGeExternalBoundedSurface::isNurbs ( ) const

Return true if and only if the unbounded base surface can be represented as an OdGeNurbSurface.

◆ isOwnerOfSurface()

bool OdGeExternalBoundedSurface::isOwnerOfSurface ( ) const

Returns true if and only if the external surface owns the data.

Remarks: If the external surface owns the data, it will be destroyed when the curve is destroyed.

◆ isPlane()

bool OdGeExternalBoundedSurface::isPlane ( ) const

Return true if and only if the unbounded base surface can be represented as an OdGePlanarEnt.

◆ isSphere()

bool OdGeExternalBoundedSurface::isSphere ( ) const

Return true if and only if the unbounded base surface can be represented as an OdGeSphere.

◆ isTorus()

bool OdGeExternalBoundedSurface::isTorus ( ) const

Return true if and only if the unbounded base surface can be represented as an OdGeTorus.

◆ numContours()

int OdGeExternalBoundedSurface::numContours ( ) const

Returns the number of contours on this surface.

◆ operator=()

OdGeExternalBoundedSurface& OdGeExternalBoundedSurface::operator= ( const OdGeExternalBoundedSurface & extBoundSurf )

◆ set()

OdGeExternalBoundedSurface& OdGeExternalBoundedSurface::set	(	void *	pSurfaceDef,
		OdGe::ExternalEntityKind	surfaceKind,
		bool	makeCopy = `true`
	)

Sets the parameters for this external bound surface according to the arguments, and returns a reference to this external surface.

Parameters

pSurfaceDef	[in] Pointer to the surface definition.
surfaceKind	[in] Information about system that created the surface.
makeCopy	[in] If true, makes a copy of the surface definition.

◆ setToOwnSurface()

OdGeExternalBoundedSurface& OdGeExternalBoundedSurface::setToOwnSurface ( )

Forces this external surface to own the data, and returns a reference to this external surface.

Remarks: If the external surface owns the data, it will be destroyed when the external surface is destroyed.

The documentation for this class was generated from the following file:

GeExternalBoundedSurface.h

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ OdGeExternalBoundedSurface() [1/3]

◆ OdGeExternalBoundedSurface() [2/3]

◆ OdGeExternalBoundedSurface() [3/3]

Member Function Documentation

◆ externalSurfaceKind()

◆ getBaseSurface() [1/2]

◆ getBaseSurface() [2/2]

◆ getContours()

◆ getExternalSurface()

◆ isCone()

◆ isCylinder()

◆ isDefined()

◆ isEllipCone()

◆ isEllipCylinder()

◆ isExternalSurface()

◆ isNurbs()

◆ isOwnerOfSurface()

◆ isPlane()

◆ isSphere()

◆ isTorus()

◆ numContours()

◆ operator=()

◆ set()

◆ setToOwnSurface()