#include <GeLineSeg3d.h>

Inheritance diagram for OdGeLineSeg3d:

Public Member Functions
	OdGeLineSeg3d ()

	OdGeLineSeg3d (const OdGeLineSeg3d &source)

	OdGeLineSeg3d (const OdGePoint3d &point, const OdGeVector3d &vect)

	OdGeLineSeg3d (const OdGePoint3d &point1, const OdGePoint3d &point2)

void	getBisector (OdGePlane &plane) const

OdGePoint3d	baryComb (double blendCoeff) const

OdGePoint3d	startPoint () const

OdGePoint3d	midPoint () const

OdGePoint3d	endPoint () const

OdGeLineSeg3d &	set (const OdGePoint3d &point, const OdGeVector3d &vect)

OdGeLineSeg3d &	set (const OdGePoint3d &point1, const OdGePoint3d &point2)

OdGeLineSeg3d &	set (const OdGeCurve3d &curve1, const OdGeCurve3d &curve2, double &param1, double &param2, bool &success)

OdGeLineSeg3d &	set (const OdGeCurve3d &curve, const OdGePoint3d &point, double &param, bool &success)

OdGeLineSeg3d &	operator= (const OdGeLineSeg3d &line)

double	getDistanceToVector (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

Public Member Functions inherited from OdGeLinearEnt3d
bool	intersectWith (const OdGeLinearEnt3d &line, OdGePoint3d &intPt, const OdGeTol &tol=OdGeContext::gTol) const

bool	intersectWith (const OdGePlanarEnt &plane, OdGePoint3d &intPnt, const OdGeTol &tol=OdGeContext::gTol) const

bool	projIntersectWith (const OdGeLinearEnt3d &line, const OdGeVector3d &projDir, OdGePoint3d &pntOnThisLine, OdGePoint3d &pntOnOtherLine, const OdGeTol &tol=OdGeContext::gTol) const

bool	overlap (const OdGeLinearEnt3d &line, OdGeLinearEnt3d *&overlap, const OdGeTol &tol=OdGeContext::gTol) const

	TD_USING (OdGeCurve3d::isOn)

bool	isOn (const OdGePlane &plane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isParallelTo (const OdGeLinearEnt3d &line, const OdGeTol &tol=OdGeContext::gTol) const

bool	isParallelTo (const OdGePlanarEnt &plane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isPerpendicularTo (const OdGeLinearEnt3d &line, const OdGeTol &tol=OdGeContext::gTol) const

bool	isPerpendicularTo (const OdGePlanarEnt &plane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isColinearTo (const OdGeLinearEnt3d &line, const OdGeTol &tol=OdGeContext::gTol) const

void	getPerpPlane (const OdGePoint3d &point, OdGePlane &plane) const

OdGePoint3d	pointOnLine () const

OdGeVector3d	direction () const

void	getLine (OdGeLine3d &line) const

OdGeLinearEnt3d &	operator= (const OdGeLinearEnt3d &line)

Public Member Functions inherited from OdGeCurve3d
void	getInterval (OdGeInterval &interval) const

void	getInterval (OdGeInterval &interval, OdGePoint3d &start, OdGePoint3d &end) const

OdGeCurve3d &	reverseParam ()

OdGeCurve3d &	setInterval ()

bool	setInterval (const OdGeInterval &interval)

double	distanceTo (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

double	distanceTo (const OdGeCurve3d &curve, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	closestPointTo (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	closestPointTo (const OdGeCurve3d &curve, OdGePoint3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getClosestPointTo (const OdGePoint3d &point, OdGePointOnCurve3d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getClosestPointTo (const OdGeCurve3d &curve, OdGePointOnCurve3d &pntOnThisCrv, OdGePointOnCurve3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	projClosestPointTo (const OdGePoint3d &point, const OdGeVector3d &projectDirection, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	projClosestPointTo (const OdGeCurve3d &curve, const OdGeVector3d &projectDirection, OdGePoint3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getProjClosestPointTo (const OdGePoint3d &point, const OdGeVector3d &projectDirection, OdGePointOnCurve3d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getProjClosestPointTo (const OdGeCurve3d &curve, const OdGeVector3d &projectDirection, OdGePointOnCurve3d &pntOnThisCrv, OdGePointOnCurve3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

bool	getNormalPoint (const OdGePoint3d &point, OdGePointOnCurve3d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const

OdGeBoundBlock3d	boundBlock () const

OdGeBoundBlock3d	boundBlock (const OdGeInterval &range) const

OdGeBoundBlock3d	orthoBoundBlock () const

OdGeBoundBlock3d	orthoBoundBlock (const OdGeInterval &range) const

OdGeEntity3d *	project (const OdGePlane &projectionPlane, const OdGeVector3d &projectDirection, const OdGeTol &tol=OdGeContext::gTol) const

OdGeEntity3d *	orthoProject (const OdGePlane &projectionPlane, const OdGeTol &tol=OdGeContext::gTol) const

	TD_USING (OdGeEntity3d::isOn)

bool	isOn (const OdGePoint3d &point, double &param, const OdGeTol &tol=OdGeContext::gTol) const

bool	isOn (double param, const OdGeTol &tol=OdGeContext::gTol) const

double	paramOf (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

void	getTrimmedOffset (double distance, const OdGeVector3d &planeNormal, OdGeCurve3dPtrArray &offsetCurveList, OdGe::OffsetCrvExtType extensionType=OdGe::kFillet, const OdGeTol &tol=OdGeContext::gTol) const

bool	isClosed (const OdGeTol &tol=OdGeContext::gTol) const

bool	isPlanar (OdGePlane &plane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isLinear (OdGeLine3d &line, const OdGeTol &tol=OdGeContext::gTol) const

bool	isCoplanarWith (const OdGeCurve3d &curve, OdGePlane &plane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isPeriodic (double &period) const

double	length (double fromParam, double toParam, double tol=OdGeContext::gTol.equalPoint()) const

double	length (double tol=OdGeContext::gTol.equalPoint()) const

double	paramAtLength (double datumParam, double length, bool posParamDir=true, double tol=OdGeContext::gTol.equalPoint()) const

bool	area (double startParam, double endParam, double &value, const OdGeTol &tol=OdGeContext::gTol) const

bool	isDegenerate (OdGe::EntityId &degenerateType, const OdGeTol &tol=OdGeContext::gTol) const

bool	isDegenerate (OdGeEntity3d *&pConvertedEntity, const OdGeTol &tol=OdGeContext::gTol) const

void	getSplitCurves (double param, OdGeCurve3d &piece1, OdGeCurve3d &piece2) const

bool	explode (OdGeCurve3dPtrArray &explodedCurves, OdGeIntArray &newExplodedCurves, const OdGeInterval *pInterval=NULL) const

void	getLocalClosestPoints (const OdGePoint3d &point, OdGePointOnCurve3d &approxPntOnThisCrv, const OdGeInterval *pInterval1=NULL, const OdGeTol &tol=OdGeContext::gTol) const

void	getLocalClosestPoints (const OdGeCurve3d &curve, OdGePointOnCurve3d &approxPntOnThisCrv, OdGePointOnCurve3d &approxPntOnOtherCrv, const OdGeInterval pInterval1=NULL, const OdGeInterval pInterval2=NULL, const OdGeTol &tol=OdGeContext::gTol) const

bool	hasStartPoint (OdGePoint3d &startPoint) const

bool	hasEndPoint (OdGePoint3d &endPoint) const

OdGePoint3d	evalPoint (double param) const

OdGePoint3d	evalPoint (double param, int numDeriv, OdGeVector3dArray &derivatives) const

void	getSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray &paramArray, bool forceResampling=false) const

void	getSamplePoints (int numSample, OdGePoint3dArray &pointArray) const

void	getSamplePoints (int numSample, OdGePoint3dArray &pointArray, OdGeDoubleArray &paramArray) const

OdGeCurve3d &	operator= (const OdGeCurve3d &curve)

void	getSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray *paramArray=NULL) const

void	getSamplePoints (const OdGeInterval paramInterval, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray pParamArray=NULL) const

void	appendSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray *pParamArray=NULL) const

void	appendSamplePoints (int numSample, OdGePoint3dArray &pointArray, OdGeDoubleArray *pParamArray=NULL) const

void	appendSamplePoints (const OdGeInterval paramInterval, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray pParamArray=NULL) const

Public Member Functions inherited from OdGeEntity3d
	ODRX_HEAP_OPERATORS ()

	~OdGeEntity3d ()

bool	isKindOf (OdGe::EntityId entType) const

OdGe::EntityId	type () const

OdGeEntity3d *	copy () const

OdGeEntity3d &	operator= (const OdGeEntity3d &entity)

bool	operator== (const OdGeEntity3d &entity) const

bool	operator!= (const OdGeEntity3d &entity) const

bool	isEqualTo (const OdGeEntity3d &object, const OdGeTol &tol=OdGeContext::gTol) const

OdGeEntity3d &	transformBy (const OdGeMatrix3d &xfm)

OdGeEntity3d &	translateBy (const OdGeVector3d &translateVec)

OdGeEntity3d &	rotateBy (double angle, const OdGeVector3d &vect, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)

OdGeEntity3d &	mirror (const OdGePlane &plane)

OdGeEntity3d &	scaleBy (double scaleFactor, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)

bool	isOn (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

Additional Inherited Members
Protected Member Functions inherited from OdGeLinearEnt3d
	OdGeLinearEnt3d ()

	OdGeLinearEnt3d (const OdGeLinearEnt3d &source)

Protected Member Functions inherited from OdGeCurve3d
	OdGeCurve3d ()

	OdGeCurve3d (const OdGeCurve3d &source)

Protected Member Functions inherited from OdGeEntity3d
	OdGeEntity3d ()

	OdGeEntity3d (const OdGeEntity3d &)

void	connectTo (OdGeEntity3dImpl *)

Detailed Description

This class represents line segments in 3D space.

Corresponding C++ library: TD_Ge

See also: <link ge_OdGeLineSeg.html, Working with Line Segments>

Definition at line 43 of file GeLineSeg3d.h.

Constructor & Destructor Documentation

◆ OdGeLineSeg3d() [1/4]

OdGeLineSeg3d::OdGeLineSeg3d ( )

Constructs a line segment with start and end points at coordinates origin (0,0,0).

◆ OdGeLineSeg3d() [2/4]

OdGeLineSeg3d::OdGeLineSeg3d ( const OdGeLineSeg3d & source )

Constructs a line segment.

Parameters

source [in] Object to be cloned.

◆ OdGeLineSeg3d() [3/4]

OdGeLineSeg3d::OdGeLineSeg3d	(	const OdGePoint3d &	point,
		const OdGeVector3d &	vect
	)

Constructs a line segment between the points: point and point + vect.

Parameters

point	[in] Any 3D point.
vect	[in] Any 3D vector.

Remarks: vect can have a zero length.

◆ OdGeLineSeg3d() [4/4]

OdGeLineSeg3d::OdGeLineSeg3d	(	const OdGePoint3d &	point1,
		const OdGePoint3d &	point2
	)

Constructs a line segment between the specified points.

Parameters

point1	[in] Any 3D point.
point2	[in] Any 3D point.

Remarks: Points point1 and point2 can be coincident.

Member Function Documentation

◆ baryComb()

OdGePoint3d OdGeLineSeg3d::baryComb ( double blendCoeff ) const

Returns the weighted average of the start point and end point of this line segment.

Parameters

blendCoeff [in] Blend coefficient.

Remarks

Returns 0 start point 1 end point 0 to 1 point on this line segment < 0 or > 1 point not on this line segment, but colinear with it.

◆ endPoint()

OdGePoint3d OdGeLineSeg3d::endPoint ( ) const

Returns the end point of this line segment.

◆ getBisector()

void OdGeLineSeg3d::getBisector ( OdGePlane & plane ) const

Gets the unbounded perpendicular bisecting plane of this line segment.

Parameters

line	[out] Receives the bisecting plane.

◆ getDistanceToVector()

double OdGeLineSeg3d::getDistanceToVector	(	const OdGePoint3d &	point,
		const OdGeTol &	tol = `OdGeContext::gTol`
	)		const

Returns the distance to vector.

Parameters

point	[in] Any 3D point.
tol	[in] Tolerance.

◆ midPoint()

OdGePoint3d OdGeLineSeg3d::midPoint ( ) const

Returns the midpoint of this line segment.

◆ operator=()

OdGeLineSeg3d& OdGeLineSeg3d::operator= ( const OdGeLineSeg3d & line )

◆ set() [1/4]

OdGeLineSeg3d& OdGeLineSeg3d::set	(	const OdGeCurve3d &	curve,
		const OdGePoint3d &	point,
		double &	param,
		bool &	success
	)

Sets the parameters for this line segment according to the arguments, and returns a reference to this line segment.

Parameters

curve	[in] Any 3D curve.
point	[in] Any 3D point.
param	[in] A point on curve where line segment is tangent to curve.
success	[out] Indicates that tangent line was computed successfully.

Remarks: The point must lie on the plane of the curve and the curve must be planar. If success returns false, the line segment does not change.

◆ set() [2/4]

OdGeLineSeg3d& OdGeLineSeg3d::set	(	const OdGeCurve3d &	curve1,
		const OdGeCurve3d &	curve2,
		double &	param1,
		double &	param2,
		bool &	success
	)

Sets the parameters for this line segment according to the arguments, and returns a reference to this line segment.

Parameters

curve1	[in] Any 3D curve.
curve2	[in] Any 3D curve.
param1	[in] A point on curve1 where line segment is tangent to curve.
param2	[in] A point on curve2 where line segment is tangent to curve.
success	[out] Indicates that tangent line was computed successfully.

Remarks: If success returns false, the line segment does not change.

◆ set() [3/4]

OdGeLineSeg3d& OdGeLineSeg3d::set	(	const OdGePoint3d &	point,
		const OdGeVector3d &	vect
	)

Sets the parameters for this line according to the arguments, and returns a reference to this line.

Parameters

point	[in] Any 3D point.
vect	[in] Any 3D vector.

Remarks: point and vect construct a line segment between the points: point and point + vect. vect can have a zero length.

◆ set() [4/4]

OdGeLineSeg3d& OdGeLineSeg3d::set	(	const OdGePoint3d &	point1,
		const OdGePoint3d &	point2
	)

Sets the parameters for this line according to the arguments, and returns a reference to this line.

Parameters

point1	[in] Any 3D point.
point2	[in] Any 3D point.

Remarks: point1 and point2 construct a line segment between points point1 and point2. The points can be coincident.

◆ startPoint()

OdGePoint3d OdGeLineSeg3d::startPoint ( ) const

Returns the start point of this line segment.

The documentation for this class was generated from the following file:

GeLineSeg3d.h

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ OdGeLineSeg3d() [1/4]

◆ OdGeLineSeg3d() [2/4]

◆ OdGeLineSeg3d() [3/4]

◆ OdGeLineSeg3d() [4/4]

Member Function Documentation

◆ baryComb()

◆ endPoint()

◆ getBisector()

◆ getDistanceToVector()

◆ midPoint()

◆ operator=()

◆ set() [1/4]

◆ set() [2/4]

◆ set() [3/4]

◆ set() [4/4]

◆ startPoint()