#include <GeSplineEnt3d.h>

Inheritance diagram for OdGeSplineEnt3d:

Public Member Functions
bool	isRational () const

int	degree () const

int	order () const

int	numKnots () const

const OdGeKnotVector &	knots () const

int	numControlPoints () const

int	continuityAtKnot (int index, const OdGeTol &tol=OdGeContext::gTol) const

double	startParam () const

double	endParam () const

OdGePoint3d	startPoint () const

OdGePoint3d	endPoint () const

bool	hasFitData () const

double	knotAt (int knotIndex) const

OdGeSplineEnt3d &	setKnotAt (int knotIndex, double val)

OdGePoint3d	controlPointAt (int controlPointIndex) const

OdGeSplineEnt3d &	setControlPointAt (int controlPointIndex, const OdGePoint3d &point)

OdGeSplineEnt3d &	operator= (const OdGeSplineEnt3d &spline)

Public Member Functions inherited from OdGeCurve3d
void	getInterval (OdGeInterval &interval) const

void	getInterval (OdGeInterval &interval, OdGePoint3d &start, OdGePoint3d &end) const

OdGeCurve3d &	reverseParam ()

OdGeCurve3d &	setInterval ()

bool	setInterval (const OdGeInterval &interval)

double	distanceTo (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

double	distanceTo (const OdGeCurve3d &curve, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	closestPointTo (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	closestPointTo (const OdGeCurve3d &curve, OdGePoint3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getClosestPointTo (const OdGePoint3d &point, OdGePointOnCurve3d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getClosestPointTo (const OdGeCurve3d &curve, OdGePointOnCurve3d &pntOnThisCrv, OdGePointOnCurve3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	projClosestPointTo (const OdGePoint3d &point, const OdGeVector3d &projectDirection, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	projClosestPointTo (const OdGeCurve3d &curve, const OdGeVector3d &projectDirection, OdGePoint3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getProjClosestPointTo (const OdGePoint3d &point, const OdGeVector3d &projectDirection, OdGePointOnCurve3d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getProjClosestPointTo (const OdGeCurve3d &curve, const OdGeVector3d &projectDirection, OdGePointOnCurve3d &pntOnThisCrv, OdGePointOnCurve3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

bool	getNormalPoint (const OdGePoint3d &point, OdGePointOnCurve3d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const

OdGeBoundBlock3d	boundBlock () const

OdGeBoundBlock3d	boundBlock (const OdGeInterval &range) const

OdGeBoundBlock3d	orthoBoundBlock () const

OdGeBoundBlock3d	orthoBoundBlock (const OdGeInterval &range) const

OdGeEntity3d *	project (const OdGePlane &projectionPlane, const OdGeVector3d &projectDirection, const OdGeTol &tol=OdGeContext::gTol) const

OdGeEntity3d *	orthoProject (const OdGePlane &projectionPlane, const OdGeTol &tol=OdGeContext::gTol) const

	TD_USING (OdGeEntity3d::isOn)

bool	isOn (const OdGePoint3d &point, double &param, const OdGeTol &tol=OdGeContext::gTol) const

bool	isOn (double param, const OdGeTol &tol=OdGeContext::gTol) const

double	paramOf (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

void	getTrimmedOffset (double distance, const OdGeVector3d &planeNormal, OdGeCurve3dPtrArray &offsetCurveList, OdGe::OffsetCrvExtType extensionType=OdGe::kFillet, const OdGeTol &tol=OdGeContext::gTol) const

bool	isClosed (const OdGeTol &tol=OdGeContext::gTol) const

bool	isPlanar (OdGePlane &plane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isLinear (OdGeLine3d &line, const OdGeTol &tol=OdGeContext::gTol) const

bool	isCoplanarWith (const OdGeCurve3d &curve, OdGePlane &plane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isPeriodic (double &period) const

double	length (double fromParam, double toParam, double tol=OdGeContext::gTol.equalPoint()) const

double	length (double tol=OdGeContext::gTol.equalPoint()) const

double	paramAtLength (double datumParam, double length, bool posParamDir=true, double tol=OdGeContext::gTol.equalPoint()) const

bool	area (double startParam, double endParam, double &value, const OdGeTol &tol=OdGeContext::gTol) const

bool	isDegenerate (OdGe::EntityId &degenerateType, const OdGeTol &tol=OdGeContext::gTol) const

bool	isDegenerate (OdGeEntity3d *&pConvertedEntity, const OdGeTol &tol=OdGeContext::gTol) const

void	getSplitCurves (double param, OdGeCurve3d &piece1, OdGeCurve3d &piece2) const

bool	explode (OdGeCurve3dPtrArray &explodedCurves, OdGeIntArray &newExplodedCurves, const OdGeInterval *pInterval=NULL) const

void	getLocalClosestPoints (const OdGePoint3d &point, OdGePointOnCurve3d &approxPntOnThisCrv, const OdGeInterval *pInterval1=NULL, const OdGeTol &tol=OdGeContext::gTol) const

void	getLocalClosestPoints (const OdGeCurve3d &curve, OdGePointOnCurve3d &approxPntOnThisCrv, OdGePointOnCurve3d &approxPntOnOtherCrv, const OdGeInterval pInterval1=NULL, const OdGeInterval pInterval2=NULL, const OdGeTol &tol=OdGeContext::gTol) const

bool	hasStartPoint (OdGePoint3d &startPoint) const

bool	hasEndPoint (OdGePoint3d &endPoint) const

OdGePoint3d	evalPoint (double param) const

OdGePoint3d	evalPoint (double param, int numDeriv, OdGeVector3dArray &derivatives) const

void	getSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray &paramArray, bool forceResampling=false) const

void	getSamplePoints (int numSample, OdGePoint3dArray &pointArray) const

void	getSamplePoints (int numSample, OdGePoint3dArray &pointArray, OdGeDoubleArray &paramArray) const

OdGeCurve3d &	operator= (const OdGeCurve3d &curve)

void	getSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray *paramArray=NULL) const

void	getSamplePoints (const OdGeInterval paramInterval, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray pParamArray=NULL) const

void	appendSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray *pParamArray=NULL) const

void	appendSamplePoints (int numSample, OdGePoint3dArray &pointArray, OdGeDoubleArray *pParamArray=NULL) const

void	appendSamplePoints (const OdGeInterval paramInterval, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray pParamArray=NULL) const

Public Member Functions inherited from OdGeEntity3d
	ODRX_HEAP_OPERATORS ()

	~OdGeEntity3d ()

bool	isKindOf (OdGe::EntityId entType) const

OdGe::EntityId	type () const

OdGeEntity3d *	copy () const

OdGeEntity3d &	operator= (const OdGeEntity3d &entity)

bool	operator== (const OdGeEntity3d &entity) const

bool	operator!= (const OdGeEntity3d &entity) const

bool	isEqualTo (const OdGeEntity3d &object, const OdGeTol &tol=OdGeContext::gTol) const

OdGeEntity3d &	transformBy (const OdGeMatrix3d &xfm)

OdGeEntity3d &	translateBy (const OdGeVector3d &translateVec)

OdGeEntity3d &	rotateBy (double angle, const OdGeVector3d &vect, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)

OdGeEntity3d &	mirror (const OdGePlane &plane)

OdGeEntity3d &	scaleBy (double scaleFactor, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)

bool	isOn (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

Protected Member Functions
	OdGeSplineEnt3d ()

	OdGeSplineEnt3d (const OdGeSplineEnt3d &)

Protected Member Functions inherited from OdGeCurve3d
	OdGeCurve3d ()

	OdGeCurve3d (const OdGeCurve3d &source)

Protected Member Functions inherited from OdGeEntity3d
	OdGeEntity3d ()

	OdGeEntity3d (const OdGeEntity3d &)

void	connectTo (OdGeEntity3dImpl *)

Detailed Description

This class represents various spline objects in 3D space. Currently not implemented.

Corresponding C++ library: TD_Ge

Definition at line 39 of file GeSplineEnt3d.h.

Constructor & Destructor Documentation

◆ OdGeSplineEnt3d() [1/2]

OdGeSplineEnt3d::OdGeSplineEnt3d ( )

protected

◆ OdGeSplineEnt3d() [2/2]

OdGeSplineEnt3d::OdGeSplineEnt3d ( const OdGeSplineEnt3d & )

protected

Member Function Documentation

◆ continuityAtKnot()

int OdGeSplineEnt3d::continuityAtKnot	(	int	index,
		const OdGeTol &	tol = `OdGeContext::gTol`
	)		const

◆ controlPointAt()

OdGePoint3d OdGeSplineEnt3d::controlPointAt ( int controlPointIndex ) const

Returns the specified control point in the control point array.

Parameters

controlPointIndex [in] Control point index.

Remarks: Currently not implemented.

◆ degree()

int OdGeSplineEnt3d::degree ( ) const

Returns the degree of the spline.

Remarks: Currently not implemented.

◆ endParam()

double OdGeSplineEnt3d::endParam ( ) const

Returns the parameter corresponding to the end point of this spline.

Remarks: Currently not implemented.

◆ endPoint()

OdGePoint3d OdGeSplineEnt3d::endPoint ( ) const

Returns the end point of this spline.

Remarks: Currently not implemented.

◆ hasFitData()

bool OdGeSplineEnt3d::hasFitData ( ) const

Returns true if and only if the spline is constructed using fit points.

Remarks: Currently not implemented.

◆ isRational()

bool OdGeSplineEnt3d::isRational ( ) const

Returns true if and only if the spline is rational or a polynomial.

Remarks: This function is meaningful only for OdGeNurbCurve3d objects derived from OdGeSplineEnt3d.; Currently not implemented.

◆ knotAt()

double OdGeSplineEnt3d::knotAt ( int knotIndex ) const

Returns a knot value for the specified knot.

Parameters

knotIndex [in] Knot index.

Remarks: Currently not implemented.

◆ knots()

const OdGeKnotVector& OdGeSplineEnt3d::knots ( ) const

Returns the knot vector.

Remarks: Currently not implemented.

◆ numControlPoints()

int OdGeSplineEnt3d::numControlPoints ( ) const

Returns the number of points in the control point array.

Remarks: Currently not implemented.

◆ numKnots()

int OdGeSplineEnt3d::numKnots ( ) const

Returns the number of knots in the knot vector.

Remarks: Currently not implemented.

◆ operator=()

OdGeSplineEnt3d& OdGeSplineEnt3d::operator= ( const OdGeSplineEnt3d & spline )

◆ order()

int OdGeSplineEnt3d::order ( ) const

Returns the order of the spline.

Remarks: Currently not implemented.

◆ setControlPointAt()

OdGeSplineEnt3d& OdGeSplineEnt3d::setControlPointAt	(	int	controlPointIndex,
		const OdGePoint3d &	point
	)

Sets the specified control point in the control point array.

Parameters

controlPointIndex [in] Control point index.

Remarks: Currently not implemented.

◆ setKnotAt()

OdGeSplineEnt3d& OdGeSplineEnt3d::setKnotAt	(	int	knotIndex,
		double	val
	)

Sets the knot value for the specified knot.

Parameters

knotIndex	[in] Knot index.
val	[in] The new value for the knot.

Remarks: Currently not implemented.

◆ startParam()

double OdGeSplineEnt3d::startParam ( ) const

Returns the parameter corresponding to the start point of this spline.

Remarks: Currently not implemented.

◆ startPoint()

OdGePoint3d OdGeSplineEnt3d::startPoint ( ) const

Returns the start point of this spline.

Remarks: Currently not implemented.

The documentation for this class was generated from the following file:

GeSplineEnt3d.h

Public Member Functions

Protected Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ OdGeSplineEnt3d() [1/2]

◆ OdGeSplineEnt3d() [2/2]

Member Function Documentation

◆ continuityAtKnot()

◆ controlPointAt()

◆ degree()

◆ endParam()

◆ endPoint()

◆ hasFitData()

◆ isRational()

◆ knotAt()

◆ knots()

◆ numControlPoints()

◆ numKnots()

◆ operator=()

◆ order()

◆ setControlPointAt()

◆ setKnotAt()

◆ startParam()

◆ startPoint()