#include <GeCubicSplineCurve3d.h>

Inheritance diagram for OdGeCubicSplineCurve3d:

Public Member Functions
	OdGeCubicSplineCurve3d ()

	OdGeCubicSplineCurve3d (const OdGeCubicSplineCurve3d &source)

	OdGeCubicSplineCurve3d (const OdGePoint3dArray &fitPnts, const OdGeTol &tol=OdGeContext::gTol)

	OdGeCubicSplineCurve3d (const OdGePoint3dArray &fitPnts, const OdGeVector3d &startDeriv, const OdGeVector3d &endDeriv, const OdGeTol &tol=OdGeContext::gTol)

	OdGeCubicSplineCurve3d (const OdGeCurve3d &curve, double epsilon=OdGeContext::gTol.equalPoint())

	OdGeCubicSplineCurve3d (const OdGeKnotVector &knots, const OdGePoint3dArray &fitPnts, const OdGeVector3dArray &firstDerivs, bool isPeriodic=false)

int	numFitPoints () const

OdGePoint3d	fitPointAt (int fotPointIndex) const

OdGeCubicSplineCurve3d &	setFitPointAt (int fitPointIndex, const OdGePoint3d &point)

OdGeVector3d	firstDerivAt (int fitPointIndex) const

OdGeCubicSplineCurve3d &	setFirstDerivAt (int fitPointIndex, const OdGeVector3d &deriv)

OdGeCubicSplineCurve3d &	operator= (const OdGeCubicSplineCurve3d &spline)

Public Member Functions inherited from OdGeSplineEnt3d
bool	isRational () const

int	degree () const

int	order () const

int	numKnots () const

const OdGeKnotVector &	knots () const

int	numControlPoints () const

int	continuityAtKnot (int index, const OdGeTol &tol=OdGeContext::gTol) const

double	startParam () const

double	endParam () const

OdGePoint3d	startPoint () const

OdGePoint3d	endPoint () const

bool	hasFitData () const

double	knotAt (int knotIndex) const

OdGeSplineEnt3d &	setKnotAt (int knotIndex, double val)

OdGePoint3d	controlPointAt (int controlPointIndex) const

OdGeSplineEnt3d &	setControlPointAt (int controlPointIndex, const OdGePoint3d &point)

OdGeSplineEnt3d &	operator= (const OdGeSplineEnt3d &spline)

Public Member Functions inherited from OdGeCurve3d
void	getInterval (OdGeInterval &interval) const

void	getInterval (OdGeInterval &interval, OdGePoint3d &start, OdGePoint3d &end) const

OdGeCurve3d &	reverseParam ()

OdGeCurve3d &	setInterval ()

bool	setInterval (const OdGeInterval &interval)

double	distanceTo (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

double	distanceTo (const OdGeCurve3d &curve, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	closestPointTo (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	closestPointTo (const OdGeCurve3d &curve, OdGePoint3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getClosestPointTo (const OdGePoint3d &point, OdGePointOnCurve3d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getClosestPointTo (const OdGeCurve3d &curve, OdGePointOnCurve3d &pntOnThisCrv, OdGePointOnCurve3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	projClosestPointTo (const OdGePoint3d &point, const OdGeVector3d &projectDirection, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	projClosestPointTo (const OdGeCurve3d &curve, const OdGeVector3d &projectDirection, OdGePoint3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getProjClosestPointTo (const OdGePoint3d &point, const OdGeVector3d &projectDirection, OdGePointOnCurve3d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getProjClosestPointTo (const OdGeCurve3d &curve, const OdGeVector3d &projectDirection, OdGePointOnCurve3d &pntOnThisCrv, OdGePointOnCurve3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

bool	getNormalPoint (const OdGePoint3d &point, OdGePointOnCurve3d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const

OdGeBoundBlock3d	boundBlock () const

OdGeBoundBlock3d	boundBlock (const OdGeInterval &range) const

OdGeBoundBlock3d	orthoBoundBlock () const

OdGeBoundBlock3d	orthoBoundBlock (const OdGeInterval &range) const

OdGeEntity3d *	project (const OdGePlane &projectionPlane, const OdGeVector3d &projectDirection, const OdGeTol &tol=OdGeContext::gTol) const

OdGeEntity3d *	orthoProject (const OdGePlane &projectionPlane, const OdGeTol &tol=OdGeContext::gTol) const

	TD_USING (OdGeEntity3d::isOn)

bool	isOn (const OdGePoint3d &point, double &param, const OdGeTol &tol=OdGeContext::gTol) const

bool	isOn (double param, const OdGeTol &tol=OdGeContext::gTol) const

double	paramOf (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

void	getTrimmedOffset (double distance, const OdGeVector3d &planeNormal, OdGeCurve3dPtrArray &offsetCurveList, OdGe::OffsetCrvExtType extensionType=OdGe::kFillet, const OdGeTol &tol=OdGeContext::gTol) const

bool	isClosed (const OdGeTol &tol=OdGeContext::gTol) const

bool	isPlanar (OdGePlane &plane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isLinear (OdGeLine3d &line, const OdGeTol &tol=OdGeContext::gTol) const

bool	isCoplanarWith (const OdGeCurve3d &curve, OdGePlane &plane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isPeriodic (double &period) const

double	length (double fromParam, double toParam, double tol=OdGeContext::gTol.equalPoint()) const

double	length (double tol=OdGeContext::gTol.equalPoint()) const

double	paramAtLength (double datumParam, double length, bool posParamDir=true, double tol=OdGeContext::gTol.equalPoint()) const

bool	area (double startParam, double endParam, double &value, const OdGeTol &tol=OdGeContext::gTol) const

bool	isDegenerate (OdGe::EntityId &degenerateType, const OdGeTol &tol=OdGeContext::gTol) const

bool	isDegenerate (OdGeEntity3d *&pConvertedEntity, const OdGeTol &tol=OdGeContext::gTol) const

void	getSplitCurves (double param, OdGeCurve3d &piece1, OdGeCurve3d &piece2) const

bool	explode (OdGeCurve3dPtrArray &explodedCurves, OdGeIntArray &newExplodedCurves, const OdGeInterval *pInterval=NULL) const

void	getLocalClosestPoints (const OdGePoint3d &point, OdGePointOnCurve3d &approxPntOnThisCrv, const OdGeInterval *pInterval1=NULL, const OdGeTol &tol=OdGeContext::gTol) const

void	getLocalClosestPoints (const OdGeCurve3d &curve, OdGePointOnCurve3d &approxPntOnThisCrv, OdGePointOnCurve3d &approxPntOnOtherCrv, const OdGeInterval pInterval1=NULL, const OdGeInterval pInterval2=NULL, const OdGeTol &tol=OdGeContext::gTol) const

bool	hasStartPoint (OdGePoint3d &startPoint) const

bool	hasEndPoint (OdGePoint3d &endPoint) const

OdGePoint3d	evalPoint (double param) const

OdGePoint3d	evalPoint (double param, int numDeriv, OdGeVector3dArray &derivatives) const

void	getSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray &paramArray, bool forceResampling=false) const

void	getSamplePoints (int numSample, OdGePoint3dArray &pointArray) const

void	getSamplePoints (int numSample, OdGePoint3dArray &pointArray, OdGeDoubleArray &paramArray) const

OdGeCurve3d &	operator= (const OdGeCurve3d &curve)

void	getSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray *paramArray=NULL) const

void	getSamplePoints (const OdGeInterval paramInterval, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray pParamArray=NULL) const

void	appendSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray *pParamArray=NULL) const

void	appendSamplePoints (int numSample, OdGePoint3dArray &pointArray, OdGeDoubleArray *pParamArray=NULL) const

void	appendSamplePoints (const OdGeInterval paramInterval, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray pParamArray=NULL) const

double	paramOf (const OdGePoint3d &point, const OdGeInterval *range, const OdGeTol &tol=OdGeContext::gTol) const

OdGeExtents3d	getGeomExtents (const OdGeInterval &range=OdGeInterval(), const OdGeMatrix3d *coordSystem=NULL) const

void	evaluate (double param, int numDeriv, OdGeVector3d *values) const

Public Member Functions inherited from OdGeEntity3d
	ODRX_HEAP_OPERATORS ()

	~OdGeEntity3d ()

bool	isKindOf (OdGe::EntityId entType) const

OdGe::EntityId	type () const

OdGeEntity3d *	copy () const

OdGeEntity3d &	operator= (const OdGeEntity3d &entity)

bool	operator== (const OdGeEntity3d &entity) const

bool	operator!= (const OdGeEntity3d &entity) const

bool	isEqualTo (const OdGeEntity3d &object, const OdGeTol &tol=OdGeContext::gTol) const

OdGeEntity3d &	transformBy (const OdGeMatrix3d &xfm)

OdGeEntity3d &	translateBy (const OdGeVector3d &translateVec)

OdGeEntity3d &	rotateBy (double angle, const OdGeVector3d &vect, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)

OdGeEntity3d &	mirror (const OdGePlane &plane)

OdGeEntity3d &	scaleBy (double scaleFactor, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)

bool	isOn (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

Additional Inherited Members
Protected Member Functions inherited from OdGeSplineEnt3d
	OdGeSplineEnt3d ()

	OdGeSplineEnt3d (const OdGeSplineEnt3d &)

Protected Member Functions inherited from OdGeCurve3d
	OdGeCurve3d ()

	OdGeCurve3d (const OdGeCurve3d &source)

Protected Member Functions inherited from OdGeEntity3d
	OdGeEntity3d ()

	OdGeEntity3d (const OdGeEntity3d &)

void	connectTo (OdGeEntity3dImpl *)

Detailed Description

This class represents 3D interpolation cubic spline curves. Currently not implemented.

Corresponding C++ library: TD_Ge

Definition at line 39 of file GeCubicSplineCurve3d.h.

Constructor & Destructor Documentation

◆ OdGeCubicSplineCurve3d() [1/6]

OdGeCubicSplineCurve3d::OdGeCubicSplineCurve3d ( )

Parameters

fitPnts	[in] An array of 3D fit points.
tol	[in] Geometric tolerance.
startDeriv	[in] Starting derivative of the cubic spline curve.
endDeriv	[in] Ending derivative of this cubic spline curve.
curve	[in] A curve to be approximated by this cubic spline curve.
knots	[in] Knot vector.
isPeriodic	[in] True if and only if the cubic spline curve is to be periodic (closed).
firstDerivs	[in] Array of first derivatives at the fit points.
source	[in] Object to be cloned.

Remarks: OdGeCubicCplineCurve3d(fitPnts, tol) constructs a periodic (closed) cubic spline curve. The last fit point must equal the first.; Currently not implemented.

◆ OdGeCubicSplineCurve3d() [2/6]

OdGeCubicSplineCurve3d::OdGeCubicSplineCurve3d ( const OdGeCubicSplineCurve3d & source )

◆ OdGeCubicSplineCurve3d() [3/6]

OdGeCubicSplineCurve3d::OdGeCubicSplineCurve3d	(	const OdGePoint3dArray &	fitPnts,
		const OdGeTol &	tol = `OdGeContext::gTol`
	)

◆ OdGeCubicSplineCurve3d() [4/6]

OdGeCubicSplineCurve3d::OdGeCubicSplineCurve3d	(	const OdGePoint3dArray &	fitPnts,
		const OdGeVector3d &	startDeriv,
		const OdGeVector3d &	endDeriv,
		const OdGeTol &	tol = `OdGeContext::gTol`
	)

◆ OdGeCubicSplineCurve3d() [5/6]

OdGeCubicSplineCurve3d::OdGeCubicSplineCurve3d	(	const OdGeCurve3d &	curve,
		double	epsilon = `OdGeContext::gTol.equalPoint()`
	)

◆ OdGeCubicSplineCurve3d() [6/6]

OdGeCubicSplineCurve3d::OdGeCubicSplineCurve3d	(	const OdGeKnotVector &	knots,
		const OdGePoint3dArray &	fitPnts,
		const OdGeVector3dArray &	firstDerivs,
		bool	isPeriodic = `false`
	)

Member Function Documentation

◆ firstDerivAt()

OdGeVector3d OdGeCubicSplineCurve3d::firstDerivAt ( int fitPointIndex ) const

Returns the first derivative at the specified index.

Parameters

fitPointIndex [in] Fit point index.

Remarks: Currently not implemented.

◆ fitPointAt()

OdGePoint3d OdGeCubicSplineCurve3d::fitPointAt ( int fotPointIndex ) const

Returns the fit point at the specified index.

Parameters

fitPointIndex [in] Fit point index.

Remarks: Currently not implemented.

◆ numFitPoints()

int OdGeCubicSplineCurve3d::numFitPoints ( ) const

Returns the number of fit points.

Remarks: Currently not implemented.

◆ operator=()

OdGeCubicSplineCurve3d& OdGeCubicSplineCurve3d::operator= ( const OdGeCubicSplineCurve3d & spline )

◆ setFirstDerivAt()

OdGeCubicSplineCurve3d& OdGeCubicSplineCurve3d::setFirstDerivAt	(	int	fitPointIndex,
		const OdGeVector3d &	deriv
	)

Sets the first derivative at the specified index, and returns a reference to this curve.

Parameters

fitPointIndex	[in] Fit point index.
deriv	[in] The first derivative at the fit point.

Remarks: Currently not implemented.

◆ setFitPointAt()

OdGeCubicSplineCurve3d& OdGeCubicSplineCurve3d::setFitPointAt	(	int	fitPointIndex,
		const OdGePoint3d &	point
	)

Sets the fit point at the specified index, and returns a reference to this curve.

Parameters

fitPointIndex	[in] Fit point index.
point	[in] Any 3D point.

Remarks: Currently not implemented.

The documentation for this class was generated from the following file:

GeCubicSplineCurve3d.h

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ OdGeCubicSplineCurve3d() [1/6]

◆ OdGeCubicSplineCurve3d() [2/6]

◆ OdGeCubicSplineCurve3d() [3/6]

◆ OdGeCubicSplineCurve3d() [4/6]

◆ OdGeCubicSplineCurve3d() [5/6]

◆ OdGeCubicSplineCurve3d() [6/6]

Member Function Documentation

◆ firstDerivAt()

◆ fitPointAt()

◆ numFitPoints()

◆ operator=()

◆ setFirstDerivAt()

◆ setFitPointAt()