#include <GeCompositeCurve3d.h>

Inheritance diagram for OdGeCompositeCurve3d:

Public Member Functions
	OdGeCompositeCurve3d ()

	OdGeCompositeCurve3d (const OdGeCompositeCurve3d &source)

	OdGeCompositeCurve3d (const OdGeCurve3dPtrArray &curveList)

	OdGeCompositeCurve3d (const OdGeCurve3d *subCurves, OdUInt32 numSubCurves)

void	getCurveList (OdGeCurve3dPtrArray &curveList) const

OdGeCompositeCurve3d &	setCurveList (const OdGeCurve3dPtrArray &curveList)

OdGeCompositeCurve3d &	setCurveList (const OdGeCurve3d *subCurves, OdUInt32 number)

double	globalToLocalParam (double param, int &crvNum) const

double	localToGlobalParam (double param, int crvNum) const

OdGeCompositeCurve3d &	operator= (const OdGeCompositeCurve3d &compCurve)

Public Member Functions inherited from OdGeCurve3d
void	getInterval (OdGeInterval &interval) const

void	getInterval (OdGeInterval &interval, OdGePoint3d &start, OdGePoint3d &end) const

OdGeCurve3d &	reverseParam ()

OdGeCurve3d &	setInterval ()

bool	setInterval (const OdGeInterval &interval)

double	distanceTo (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

double	distanceTo (const OdGeCurve3d &curve, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	closestPointTo (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	closestPointTo (const OdGeCurve3d &curve, OdGePoint3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getClosestPointTo (const OdGePoint3d &point, OdGePointOnCurve3d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getClosestPointTo (const OdGeCurve3d &curve, OdGePointOnCurve3d &pntOnThisCrv, OdGePointOnCurve3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	projClosestPointTo (const OdGePoint3d &point, const OdGeVector3d &projectDirection, const OdGeTol &tol=OdGeContext::gTol) const

OdGePoint3d	projClosestPointTo (const OdGeCurve3d &curve, const OdGeVector3d &projectDirection, OdGePoint3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getProjClosestPointTo (const OdGePoint3d &point, const OdGeVector3d &projectDirection, OdGePointOnCurve3d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const

void	getProjClosestPointTo (const OdGeCurve3d &curve, const OdGeVector3d &projectDirection, OdGePointOnCurve3d &pntOnThisCrv, OdGePointOnCurve3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const

bool	getNormalPoint (const OdGePoint3d &point, OdGePointOnCurve3d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const

OdGeBoundBlock3d	boundBlock () const

OdGeBoundBlock3d	boundBlock (const OdGeInterval &range) const

OdGeBoundBlock3d	orthoBoundBlock () const

OdGeBoundBlock3d	orthoBoundBlock (const OdGeInterval &range) const

OdGeEntity3d *	project (const OdGePlane &projectionPlane, const OdGeVector3d &projectDirection, const OdGeTol &tol=OdGeContext::gTol) const

OdGeEntity3d *	orthoProject (const OdGePlane &projectionPlane, const OdGeTol &tol=OdGeContext::gTol) const

	TD_USING (OdGeEntity3d::isOn)

bool	isOn (const OdGePoint3d &point, double &param, const OdGeTol &tol=OdGeContext::gTol) const

bool	isOn (double param, const OdGeTol &tol=OdGeContext::gTol) const

double	paramOf (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

void	getTrimmedOffset (double distance, const OdGeVector3d &planeNormal, OdGeCurve3dPtrArray &offsetCurveList, OdGe::OffsetCrvExtType extensionType=OdGe::kFillet, const OdGeTol &tol=OdGeContext::gTol) const

bool	isClosed (const OdGeTol &tol=OdGeContext::gTol) const

bool	isPlanar (OdGePlane &plane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isLinear (OdGeLine3d &line, const OdGeTol &tol=OdGeContext::gTol) const

bool	isCoplanarWith (const OdGeCurve3d &curve, OdGePlane &plane, const OdGeTol &tol=OdGeContext::gTol) const

bool	isPeriodic (double &period) const

double	length (double fromParam, double toParam, double tol=OdGeContext::gTol.equalPoint()) const

double	length (double tol=OdGeContext::gTol.equalPoint()) const

double	paramAtLength (double datumParam, double length, bool posParamDir=true, double tol=OdGeContext::gTol.equalPoint()) const

bool	area (double startParam, double endParam, double &value, const OdGeTol &tol=OdGeContext::gTol) const

bool	isDegenerate (OdGe::EntityId &degenerateType, const OdGeTol &tol=OdGeContext::gTol) const

bool	isDegenerate (OdGeEntity3d *&pConvertedEntity, const OdGeTol &tol=OdGeContext::gTol) const

void	getSplitCurves (double param, OdGeCurve3d &piece1, OdGeCurve3d &piece2) const

bool	explode (OdGeCurve3dPtrArray &explodedCurves, OdGeIntArray &newExplodedCurves, const OdGeInterval *pInterval=NULL) const

void	getLocalClosestPoints (const OdGePoint3d &point, OdGePointOnCurve3d &approxPntOnThisCrv, const OdGeInterval *pInterval1=NULL, const OdGeTol &tol=OdGeContext::gTol) const

void	getLocalClosestPoints (const OdGeCurve3d &curve, OdGePointOnCurve3d &approxPntOnThisCrv, OdGePointOnCurve3d &approxPntOnOtherCrv, const OdGeInterval pInterval1=NULL, const OdGeInterval pInterval2=NULL, const OdGeTol &tol=OdGeContext::gTol) const

bool	hasStartPoint (OdGePoint3d &startPoint) const

bool	hasEndPoint (OdGePoint3d &endPoint) const

OdGePoint3d	evalPoint (double param) const

OdGePoint3d	evalPoint (double param, int numDeriv, OdGeVector3dArray &derivatives) const

void	getSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray &paramArray, bool forceResampling=false) const

void	getSamplePoints (int numSample, OdGePoint3dArray &pointArray) const

void	getSamplePoints (int numSample, OdGePoint3dArray &pointArray, OdGeDoubleArray &paramArray) const

OdGeCurve3d &	operator= (const OdGeCurve3d &curve)

void	getSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray *paramArray=NULL) const

void	getSamplePoints (const OdGeInterval paramInterval, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray pParamArray=NULL) const

void	appendSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray *pParamArray=NULL) const

void	appendSamplePoints (int numSample, OdGePoint3dArray &pointArray, OdGeDoubleArray *pParamArray=NULL) const

void	appendSamplePoints (const OdGeInterval paramInterval, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray pParamArray=NULL) const

double	paramOf (const OdGePoint3d &point, const OdGeInterval *range, const OdGeTol &tol=OdGeContext::gTol) const

OdGeExtents3d	getGeomExtents (const OdGeInterval &range=OdGeInterval(), const OdGeMatrix3d *coordSystem=NULL) const

void	evaluate (double param, int numDeriv, OdGeVector3d *values) const

Public Member Functions inherited from OdGeEntity3d
	ODRX_HEAP_OPERATORS ()

	~OdGeEntity3d ()

bool	isKindOf (OdGe::EntityId entType) const

OdGe::EntityId	type () const

OdGeEntity3d *	copy () const

OdGeEntity3d &	operator= (const OdGeEntity3d &entity)

bool	operator== (const OdGeEntity3d &entity) const

bool	operator!= (const OdGeEntity3d &entity) const

bool	isEqualTo (const OdGeEntity3d &object, const OdGeTol &tol=OdGeContext::gTol) const

OdGeEntity3d &	transformBy (const OdGeMatrix3d &xfm)

OdGeEntity3d &	translateBy (const OdGeVector3d &translateVec)

OdGeEntity3d &	rotateBy (double angle, const OdGeVector3d &vect, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)

OdGeEntity3d &	mirror (const OdGePlane &plane)

OdGeEntity3d &	scaleBy (double scaleFactor, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)

bool	isOn (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const

Additional Inherited Members
Protected Member Functions inherited from OdGeCurve3d
	OdGeCurve3d ()

	OdGeCurve3d (const OdGeCurve3d &source)

Protected Member Functions inherited from OdGeEntity3d
	OdGeEntity3d ()

	OdGeEntity3d (const OdGeEntity3d &)

void	connectTo (OdGeEntity3dImpl *)

Detailed Description

This class represents composite curves in 3D space.

Remarks: Composite curves consists of pointers to any number of subcurves that are joined end to end. Each subcurve must be bounded.

The parameter at the start of the composite curve is 0.0. The parameter at any point along the composite curve is the approximate length of the composite curve up to that point.

Corresponding C++ library: TD_Ge

See also: <link ge_OdGeCompositeCurve3d.html, Working with Composite Curves>

Definition at line 53 of file GeCompositeCurve3d.h.

Constructor & Destructor Documentation

◆ OdGeCompositeCurve3d() [1/4]

OdGeCompositeCurve3d::OdGeCompositeCurve3d ( )

Parameters

curvelist	[in] Array of pointers to subcurves comprising the composite curve.
subCurves	[in] Array of the subcurves comprising the composite curve
numSubCurves	[in] Number of subcurves.
source	[in] Object to be cloned.

Remarks: The default constructor creates a composite curve that consists of a single subcurve: a line segment from (0,0,0) to (1,0,0).

◆ OdGeCompositeCurve3d() [2/4]

OdGeCompositeCurve3d::OdGeCompositeCurve3d ( const OdGeCompositeCurve3d & source )

◆ OdGeCompositeCurve3d() [3/4]

OdGeCompositeCurve3d::OdGeCompositeCurve3d ( const OdGeCurve3dPtrArray & curveList )

◆ OdGeCompositeCurve3d() [4/4]

OdGeCompositeCurve3d::OdGeCompositeCurve3d	(	const OdGeCurve3d *	subCurves,
		OdUInt32	numSubCurves
	)

Member Function Documentation

◆ getCurveList()

void OdGeCompositeCurve3d::getCurveList ( OdGeCurve3dPtrArray & curveList ) const

Returns an array of pointers to subcurves comprising the composite curve.

Parameters

curvelist [out] Receives an array of pointers to subcurves comprising the composite curve.

◆ globalToLocalParam()

double OdGeCompositeCurve3d::globalToLocalParam	(	double	param,
		int &	crvNum
	)		const

Returns the parameter on a subcurve, and the index of that subcurve, corresponding to the specified parameter on the composite curve.

Parameters

param	[in] Parameter value on composite curve.
crvNum	[out] Receives the curve number of the subcurve.

◆ localToGlobalParam()

double OdGeCompositeCurve3d::localToGlobalParam	(	double	param,
		int	crvNum
	)		const

Returns the parameter on the composite curve, corresponding to the specified parameter on the specifed subcurve.

Parameters

param	[in] Parameter value on the subcurve.
crvNum	[in] Curve number of the subcurve.

◆ operator=()

OdGeCompositeCurve3d& OdGeCompositeCurve3d::operator= ( const OdGeCompositeCurve3d & compCurve )

Remarks: All of the subcurves of the input curve are copied.

◆ setCurveList() [1/2]

OdGeCompositeCurve3d& OdGeCompositeCurve3d::setCurveList	(	const OdGeCurve3d *	subCurves,
		OdUInt32	number
	)

◆ setCurveList() [2/2]

OdGeCompositeCurve3d& OdGeCompositeCurve3d::setCurveList ( const OdGeCurve3dPtrArray & curveList )

Sets the curve list of the composite curve.

Parameters

curveList	[in] Array of pointers to subcurves comprising the composite curve.
subCurves	[in] Array of the subcurves comprising the composite curve.
numSubCurves	[in] Number of subcurves.

The documentation for this class was generated from the following file:

GeCompositeCurve3d.h

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ OdGeCompositeCurve3d() [1/4]

◆ OdGeCompositeCurve3d() [2/4]

◆ OdGeCompositeCurve3d() [3/4]

◆ OdGeCompositeCurve3d() [4/4]

Member Function Documentation

◆ getCurveList()

◆ globalToLocalParam()

◆ localToGlobalParam()

◆ operator=()

◆ setCurveList() [1/2]

◆ setCurveList() [2/2]