CFx SDK Documentation  2023 SP0
Public Member Functions | List of all members
OdGeSurfaceCurve2dTo3d Class Reference

#include <GeSurfaceCurve2dTo3d.h>

Inheritance diagram for OdGeSurfaceCurve2dTo3d:
OdGeCurve3d OdGeEntity3d

Public Member Functions

 OdGeSurfaceCurve2dTo3d ()
 
 OdGeSurfaceCurve2dTo3d (const OdGeSurfaceCurve2dTo3d &source)
 
 OdGeSurfaceCurve2dTo3d (const OdGeCurve2d &uvc, const OdGeSurface &surf)
 
OdGeSurfaceCurve2dTo3d & operator= (const OdGeSurfaceCurve2dTo3d &arc)
 
void getGeomExtents (OdGeExtents3d &extents) const
 
- Public Member Functions inherited from OdGeCurve3d
void getInterval (OdGeInterval &interval) const
 
void getInterval (OdGeInterval &interval, OdGePoint3d &start, OdGePoint3d &end) const
 
OdGeCurve3d & reverseParam ()
 
OdGeCurve3d & setInterval ()
 
bool setInterval (const OdGeInterval &interval)
 
double distanceTo (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const
 
double distanceTo (const OdGeCurve3d &curve, const OdGeTol &tol=OdGeContext::gTol) const
 
OdGePoint3d closestPointTo (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const
 
OdGePoint3d closestPointTo (const OdGeCurve3d &curve, OdGePoint3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const
 
void getClosestPointTo (const OdGePoint3d &point, OdGePointOnCurve3d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const
 
void getClosestPointTo (const OdGeCurve3d &curve, OdGePointOnCurve3d &pntOnThisCrv, OdGePointOnCurve3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const
 
OdGePoint3d projClosestPointTo (const OdGePoint3d &point, const OdGeVector3d &projectDirection, const OdGeTol &tol=OdGeContext::gTol) const
 
OdGePoint3d projClosestPointTo (const OdGeCurve3d &curve, const OdGeVector3d &projectDirection, OdGePoint3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const
 
void getProjClosestPointTo (const OdGePoint3d &point, const OdGeVector3d &projectDirection, OdGePointOnCurve3d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const
 
void getProjClosestPointTo (const OdGeCurve3d &curve, const OdGeVector3d &projectDirection, OdGePointOnCurve3d &pntOnThisCrv, OdGePointOnCurve3d &pntOnOtherCrv, const OdGeTol &tol=OdGeContext::gTol) const
 
bool getNormalPoint (const OdGePoint3d &point, OdGePointOnCurve3d &pntOnCrv, const OdGeTol &tol=OdGeContext::gTol) const
 
OdGeBoundBlock3d boundBlock () const
 
OdGeBoundBlock3d boundBlock (const OdGeInterval &range) const
 
OdGeBoundBlock3d orthoBoundBlock () const
 
OdGeBoundBlock3d orthoBoundBlock (const OdGeInterval &range) const
 
OdGeEntity3d * project (const OdGePlane &projectionPlane, const OdGeVector3d &projectDirection, const OdGeTol &tol=OdGeContext::gTol) const
 
OdGeEntity3d * orthoProject (const OdGePlane &projectionPlane, const OdGeTol &tol=OdGeContext::gTol) const
 
 TD_USING (OdGeEntity3d::isOn)
 
bool isOn (const OdGePoint3d &point, double &param, const OdGeTol &tol=OdGeContext::gTol) const
 
bool isOn (double param, const OdGeTol &tol=OdGeContext::gTol) const
 
double paramOf (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const
 
void getTrimmedOffset (double distance, const OdGeVector3d &planeNormal, OdGeCurve3dPtrArray &offsetCurveList, OdGe::OffsetCrvExtType extensionType=OdGe::kFillet, const OdGeTol &tol=OdGeContext::gTol) const
 
bool isClosed (const OdGeTol &tol=OdGeContext::gTol) const
 
bool isPlanar (OdGePlane &plane, const OdGeTol &tol=OdGeContext::gTol) const
 
bool isLinear (OdGeLine3d &line, const OdGeTol &tol=OdGeContext::gTol) const
 
bool isCoplanarWith (const OdGeCurve3d &curve, OdGePlane &plane, const OdGeTol &tol=OdGeContext::gTol) const
 
bool isPeriodic (double &period) const
 
double length (double fromParam, double toParam, double tol=OdGeContext::gTol.equalPoint()) const
 
double length (double tol=OdGeContext::gTol.equalPoint()) const
 
double paramAtLength (double datumParam, double length, bool posParamDir=true, double tol=OdGeContext::gTol.equalPoint()) const
 
bool area (double startParam, double endParam, double &value, const OdGeTol &tol=OdGeContext::gTol) const
 
bool isDegenerate (OdGe::EntityId &degenerateType, const OdGeTol &tol=OdGeContext::gTol) const
 
bool isDegenerate (OdGeEntity3d *&pConvertedEntity, const OdGeTol &tol=OdGeContext::gTol) const
 
void getSplitCurves (double param, OdGeCurve3d *&piece1, OdGeCurve3d *&piece2) const
 
bool explode (OdGeCurve3dPtrArray &explodedCurves, OdGeIntArray &newExplodedCurves, const OdGeInterval *pInterval=NULL) const
 
void getLocalClosestPoints (const OdGePoint3d &point, OdGePointOnCurve3d &approxPntOnThisCrv, const OdGeInterval *pInterval1=NULL, const OdGeTol &tol=OdGeContext::gTol) const
 
void getLocalClosestPoints (const OdGeCurve3d &curve, OdGePointOnCurve3d &approxPntOnThisCrv, OdGePointOnCurve3d &approxPntOnOtherCrv, const OdGeInterval *pInterval1=NULL, const OdGeInterval *pInterval2=NULL, const OdGeTol &tol=OdGeContext::gTol) const
 
bool hasStartPoint (OdGePoint3d &startPoint) const
 
bool hasEndPoint (OdGePoint3d &endPoint) const
 
OdGePoint3d evalPoint (double param) const
 
OdGePoint3d evalPoint (double param, int numDeriv, OdGeVector3dArray &derivatives) const
 
void getSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray &paramArray, bool forceResampling=false) const
 
void getSamplePoints (int numSample, OdGePoint3dArray &pointArray) const
 
void getSamplePoints (int numSample, OdGePoint3dArray &pointArray, OdGeDoubleArray &paramArray) const
 
OdGeCurve3d & operator= (const OdGeCurve3d &curve)
 
void getSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray *paramArray=NULL) const
 
void getSamplePoints (const OdGeInterval *paramInterval, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray *pParamArray=NULL) const
 
void appendSamplePoints (double fromParam, double toParam, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray *pParamArray=NULL) const
 
void appendSamplePoints (int numSample, OdGePoint3dArray &pointArray, OdGeDoubleArray *pParamArray=NULL) const
 
void appendSamplePoints (const OdGeInterval *paramInterval, double approxEps, OdGePoint3dArray &pointArray, OdGeDoubleArray *pParamArray=NULL) const
 
double paramOf (const OdGePoint3d &point, const OdGeInterval *range, const OdGeTol &tol=OdGeContext::gTol) const
 
OdGeExtents3d getGeomExtents (const OdGeInterval &range=OdGeInterval(), const OdGeMatrix3d *coordSystem=NULL) const
 
void evaluate (double param, int numDeriv, OdGeVector3d *values) const
 
- Public Member Functions inherited from OdGeEntity3d
 ODRX_HEAP_OPERATORS ()
 
 ~OdGeEntity3d ()
 
bool isKindOf (OdGe::EntityId entType) const
 
OdGe::EntityId type () const
 
OdGeEntity3d * copy () const
 
OdGeEntity3d & operator= (const OdGeEntity3d &entity)
 
bool operator== (const OdGeEntity3d &entity) const
 
bool operator!= (const OdGeEntity3d &entity) const
 
bool isEqualTo (const OdGeEntity3d &object, const OdGeTol &tol=OdGeContext::gTol) const
 
OdGeEntity3d & transformBy (const OdGeMatrix3d &xfm)
 
OdGeEntity3d & translateBy (const OdGeVector3d &translateVec)
 
OdGeEntity3d & rotateBy (double angle, const OdGeVector3d &vect, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)
 
OdGeEntity3d & mirror (const OdGePlane &plane)
 
OdGeEntity3d & scaleBy (double scaleFactor, const OdGePoint3d &basePoint=OdGePoint3d::kOrigin)
 
bool isOn (const OdGePoint3d &point, const OdGeTol &tol=OdGeContext::gTol) const
 

Additional Inherited Members

- Protected Member Functions inherited from OdGeCurve3d
 OdGeCurve3d ()
 
 OdGeCurve3d (const OdGeCurve3d &source)
 
- Protected Member Functions inherited from OdGeEntity3d
 OdGeEntity3d ()
 
 OdGeEntity3d (const OdGeEntity3d &)
 
void connectTo (OdGeEntity3dImpl *)
 

Detailed Description

This class provides a 3D representation for curves defined in the 2D surface parameter space.

Remarks
A OdGeSurfaceCurve2dTo3d object is a 3D curve, and a point of this curve at specific parameter value can be calculated by evaluating a point of the UV-curve at the corresponding parameter value: pointCurve3d = pSurf->evalPoint(pUVCurve->evalPoint(param));

Corresponding C++ library: TD_Ge

<group OdGe_Classes>

Definition at line 45 of file GeSurfaceCurve2dTo3d.h.

Constructor & Destructor Documentation

◆ OdGeSurfaceCurve2dTo3d() [1/3]

OdGeSurfaceCurve2dTo3d::OdGeSurfaceCurve2dTo3d ( )
Parameters
source[in] The Source OdGeSurfaceCurve2dTo3d object to be cloned.
uvc[in] The 2D curve defined in parameters space of the surf surface.
surf[in] The surface that contains the uvc curve.

◆ OdGeSurfaceCurve2dTo3d() [2/3]

OdGeSurfaceCurve2dTo3d::OdGeSurfaceCurve2dTo3d ( const OdGeSurfaceCurve2dTo3d &  source)

◆ OdGeSurfaceCurve2dTo3d() [3/3]

OdGeSurfaceCurve2dTo3d::OdGeSurfaceCurve2dTo3d ( const OdGeCurve2d &  uvc,
const OdGeSurface &  surf 
)

Member Function Documentation

◆ getGeomExtents()

void OdGeSurfaceCurve2dTo3d::getGeomExtents ( OdGeExtents3d &  extents) const

Returns the geometric extents of this curve.

Parameters
extents[out] Receives the geometric extents.

◆ operator=()

OdGeSurfaceCurve2dTo3d& OdGeSurfaceCurve2dTo3d::operator= ( const OdGeSurfaceCurve2dTo3d &  arc)
The documentation for this class was generated from the following file:
Generated on Thu Feb 24 2022 15:10:58