FacetModeler Namespace Reference

Classes
class	Attributes2D
class	BinaryStream
class	Body
class	BulgeSeg2D
class	CachedContour2DImpl
class	CachedContour2DImplData
class	CachedSeg2D
class	CFxFacetModelerHelper
class	CommonSeg2DImpl
class	Cone
class	Contour2D
class	Contour2DTraversingReactor
class	Contour3D
class	ContourIntersector
class	Crossing
class	Cylinder
struct	DeviationParams
class	Edge
class	EdgeBodyIterator
class	EdgeFaceIterator
class	EdgeGraph
struct	EdgeImage
struct	EdgeSortForPairRegen
class	Entity
class	Face
struct	FaceData
struct	FaceImage
class	FaceIterator
class	FaceSpatialIndex
struct	FMGeGbl
struct	GraphEdgeData
class	IBulgeSeg2D
class	IContour2D
class	Intersection
class	IntersectionWithIDs
struct	LoopImage
struct	MdlTolerance
struct	PathNode
class	Profile2D
class	Profile2DBool
class	Profile2DBoundaryImpl
class	Profile3D
class	Revolution
class	Segment2D
class	SegmentMerger
class	ShadedSurface
class	SimpleContour2DImpl
class	SimpleContour2DImplData
class	SliceContour
class	SliceContourBuilder
class	SliceContourCollection
struct	SliceEdge
struct	SliceNode
class	Slicer
class	SlicerBaseImpl
struct	SpatialFaceData
class	Sphere
class	Surface
struct	TaggedData
class	TaggedDataHeap
class	TContour2DImpl
class	TListSet
class	Torus
struct	TrEdge
class	TrMeshSew
struct	TrVertex
class	Vertex
struct	VertexImage
class	VertexIterator
class	VertexSurfData
class	Wrapper3D

Typedefs
typedef OdUInt64	KeyType
typedef std::vector< LoopImage >	LoopImages
typedef std::vector< VertexImage >	VertexImages
typedef std::map< KeyType, EdgeImage >	EdgeImages
typedef std::vector< FaceImage >	FaceImages
typedef ptrdiff_t	TagType
typedef OdArray< const Face *, OdMemoryAllocator< const Face * > >	FaceConstPtrArray
typedef std::multimap< OdUInt32, SliceContour >	SliceContoursMap
typedef Profile2D	ContoursVector
typedef std::vector< OdUInt32 >	SliceNodes
typedef OdArray< Vertex *, OdMemoryAllocator< Vertex * > >	VertexIndex
typedef OdArray< Face *, OdMemoryAllocator< Face * > >	FacePtrArray

Enumerations
enum	Result {   erOk = 0 , erWarnings , erWarnParamBounds , erWarnPointNotOnThis ,   erWarnEmptyContour , erWarnSmallContour , erWarnImproperAreas , erWarnContourNotClosed ,   erErrors = 0x1000 , erNotImplementedYet , erInvalidIndex , erParamBounds ,   erPointNotOnThis , erInvalidTransform , erWrongSegType , erEmptyContour ,   erSingularPoints , erNoMetadata , erInvalidArgs , erContourIsTooSmall ,   erSelfIntersecting , erInvalidDirection , erContourNotClosed , erOperationNotApplicable ,   erFailedToCloseContours , erImproperRegionBounds , erImproperRegionAreas , erToleranceViolation ,   erFail , erLastError }
enum	SegmentType { estUnknown = 0 , estLine , estArc , estCoincident }
enum	Locations { elUnknown = 0 , elInside , elOutside , elOnBound }
enum	MergeFlags { emfMergeArcs = 1 , emfIgnoreMetadata = 2 , emfMergeOrigin = 4 }
enum	FilletType { eftChamfer , eftTangents , eftExtend , eftCircular }
enum	ContourImplClass { ecicUnknown = 0 , ecicSimple , ecicCached , ecicLast }
enum	SegmentImplClass { esicUnknown = 0 , esicBulgeSeg2D , esicCachedSeg2D , esicLast }
enum	BooleanOperation { eUnion = 0 , eIntersection = 1 , eDifference = 2 , eXOR = 3 }
enum	Classification {   eNo = 0 , eOn = 1 , eInner = 2 , eOuter = 3 ,   eSpanning = 4 }
enum	FaceOrientation {   efoDefault = 0x00 , efoTop = 0x01 , efoBottom = 0x02 , efoLeft = 0x04 ,   efoRight = 0x08 , efoFront = 0x10 , efoBack = 0x20 , efoDiscard = 0x80 }
enum	FaceState { kInitialFaceState , kFaceToClone , kFaceToRemove , kProcessed }
enum	Operation {   eExtrusion = 4 , eRevolution = 5 , eInsideBody = 6 , eInsideFrame = 7 ,   eCustom = 8 , eTemporaryExtensionByTwoContours = 9 , eTemporaryExtensionExtrusionByTrs = 10 , eclone = 100 ,   enegate , emergeCoincidentVertices , emergeCoplanarEntities , ecombine ,   ebox , epyramid , eextrusion1 , eextrusion2 ,   eextrusion3 , erevolution1 , erevolution2 , einsideBody ,   einsideFrame , ecustomInternal , esection , ecutWithExtrusion ,   ecutWithInfExtrusion , eextrude , eTemporary_Extension_byTwoContours , eTemporary_Extension_byTwoProfiles ,   eTemporary_Extension_extrusionByTrs }
enum	{ kExtrudeClosedPath = 1 , kExtrudeSmoothAlongPath = 2 , kExtrudeSmoothAlongProfile = 4 , kExtrudeSingleArcProfile = 8 }

Functions
bool	isOk (Result eRes)
bool	isWarning (Result eRes)
bool	isError (Result eRes)
FMGEOMETRY_API OdString	GetBoolOperationName (BooleanOperation eOperation)
Result FMGEOMETRY_API	GetProfileWithOffsetSegment (const Profile2D &rSrc, Profile2D &rDest, OdUInt32 uContour, OdUInt32 uSegment, double dNormalOffset)
void FMGEOMETRY_API	DrawBody (OdGiCommonDraw *pDraw, const Body &rBody, const OdGeVector3d *pViewDir=NULL, bool bUseRGBColors=false, bool bUseMappingCoords=false)
FMGEOMETRY_API void	MarkShadedSurfaces (Body &aBody, double angleTol, bool bDetectSharpEdges=false)
FMGEOMETRY_API void	ClearShadedSurfaces (Body &aBody)
void	MergeShadedSurfaces (Body &aBody, const OdArray< std::set< Surface * > > &shadedMergeData)
OdUInt32	FLAG (OdUInt32 i)
Result	worstResult (Result eRes1, Result eRes2)
FMGEOMETRY_API OdGePoint2d	FindNearestPoint (const OdGePoint2d &ptOrigin, const std::vector< Intersection > &vecPoints)
FMGEOMETRY_API OdGePoint3d	FindNearestPoint (const OdGePoint3d &ptOrigin, const std::vector< OdGePoint3d > &vecPoints)
FMGEOMETRY_API OdGePoint2d	FindFarthestPoint (const OdGePoint2d &ptOrigin, const std::vector< Intersection > &vecPoints)
FMGEOMETRY_API OdUInt32	intersect_LineLine (const IBulgeSeg2D &rLine1, const IBulgeSeg2D &rLine2, Intersection &rInt1, Intersection &rInt2, const OdGeTol &gTol=FMGeGbl::gTol)
FMGEOMETRY_API OdUInt32	intersect_ArcLine (const IBulgeSeg2D &rArc, const IBulgeSeg2D &rLine, Intersection &rInt1, Intersection &rInt2, const OdGeTol &gTol=FMGeGbl::gTol)
FMGEOMETRY_API OdUInt32	intersect_ArcArc (const IBulgeSeg2D &rArc1, const IBulgeSeg2D &rArc2, Intersection &rInt1, Intersection &rInt2, const OdGeTol &gTol=FMGeGbl::gTol)
FMGEOMETRY_API OdUInt32	intersect_PointInfLine (const OdGePoint2d &rPoint, const OdGePoint2d &ptLineOrigin, const OdGeVector2d &vLineDir, Intersection &rInt1, const OdGeTol &gTol=FMGeGbl::gTol)
FMGEOMETRY_API OdUInt32	intersect_LineInfLine (const IBulgeSeg2D &rLineSeg, const OdGePoint2d &ptLineOrigin, const OdGeVector2d &vLineDir, Intersection &rInt1, Intersection &rInt2, const OdGeTol &gTol=FMGeGbl::gTol)
FMGEOMETRY_API OdUInt32	intersect_ArcInfLine (const IBulgeSeg2D &rArcSeg, const OdGePoint2d &ptLineOrigin, const OdGeVector2d &vLineDir, Intersection &rInt1, Intersection &rInt2, const OdGeTol &gTol=FMGeGbl::gTol)
Result	fast_isSelfIntersecting (const IContour2D &rContour, const OdGeTol &gTol, bool &bIntersects)
Result	fast_isValidRegion (const IContour2D &rContour, const OdGeTol &gTol, bool &bValidRegion)
Result	fast_intersect (const IContour2D &rContA, const IContour2D &rContB, std::vector< Intersection > &vecPoints, const OdGeTol &gTol)
Result	fast_getInternalPoint (const IContour2D &rContour, OdGePoint2d &rPoint, const OdGeTol &gTol)
void	contour2d_mergeSegments (IContour2D &rContour, int iMergeFlags=0, const OdGeTol &gTol=FMGeGbl::gTol)
Attributes2D &	nullAttributesForUpdate ()
bool	operator== (const SliceContour &c1, const SliceContour &c2)
FMGEOMETRY_API void	ExtendContourStart (Contour2D &rContour)
FMGEOMETRY_API void	ExtendContourEnd (Contour2D &rContour)
FMGEOMETRY_API void	ExtendContour (Contour2D &rContour)
FMGEOMETRY_API double	FindMinimumParamA (std::vector< Intersection > &vecPoints)
FMGEOMETRY_API double	FindMaximumParamA (std::vector< Intersection > &vecPoints)
FMGEOMETRY_API bool	FindClosestIntToBaseStart (const Contour2D &cBase, const Contour2D &cCutter, Intersection &intClosest)
FMGEOMETRY_API bool	FindClosestIntToBaseEnd (const Contour2D &cBase, const Contour2D &cCutter, Intersection &intClosest)
FMGEOMETRY_API bool	FindFarthestIntFromBasePt (const Contour2D &cContour, const OdGeLine2d &lnCutter, const OdGePoint2d &ptBase, Intersection &outInt)
FMGEOMETRY_API bool	FindFarthestIntFromBasePt (const Contour2D &cContour, const Contour2D &cCutter, const OdGePoint2d &ptBase, Intersection &outInt)
FMGEOMETRY_API Intersection	FindFarthestIntFromPt (const OdGePoint2d &ptBase, const std::vector< Intersection > &vecPoints)
FMGEOMETRY_API Intersection	FindIntClosestToPt (const OdGePoint2d &ptBase, const std::vector< Intersection > &vecPoints)
FMGEOMETRY_API bool	IsIntersectionCloserToPt (const OdGePoint2d &ptBase, const Intersection &intCurrent, const Intersection &intToCheck)
FMGEOMETRY_API Body	extrude (const Profile2D &base, const DeviationParams &deviation, OdUInt32 n, const PathNode *path, OdUInt32 flags=0)
FMGEOMETRY_API void	getBaseFaces (const Profile2D &rProfile, std::vector< Profile2D > &aBaseFaces, const DeviationParams &devDeviation)

Variables
const OdUInt32	AEF = FLAG(0)
const OdUInt32	VEF = FLAG(1)
const OdUInt32	VFF = FLAG(0)
const OdUInt32	OFF = FLAG(1)
const OdUInt32	SKIP_HATCH = FLAG(18)

Detailed Description

<group TA_Geometry>

Namespace for FacetModeler's entities.

Typedef Documentation

ContoursVector

typedef Profile2D FacetModeler::ContoursVector

Definition at line 165 of file FMSliceContourBuilder.h.

EdgeImages

typedef std::map<KeyType, EdgeImage> FacetModeler::EdgeImages

Map of pointers and edge image entities.

Definition at line 116 of file FMDataSerialize.h.

FaceConstPtrArray

typedef OdArray< const Face *, OdMemoryAllocator< const Face * > > FacetModeler::FaceConstPtrArray

Array of constant Face pointers

Definition at line 413 of file FMMdlFace.h.

FaceImages

typedef std::vector<FaceImage> FacetModeler::FaceImages

Array of face image entities.

Definition at line 119 of file FMDataSerialize.h.

FacePtrArray

typedef OdArray<Face*, OdMemoryAllocator<Face*> > FacetModeler::FacePtrArray

Definition at line 184 of file FMSliceEngine.h.

KeyType

typedef OdUInt64 FacetModeler::KeyType

Key type.

Definition at line 35 of file FMDataSerialize.h.

LoopImages

typedef std::vector<LoopImage> FacetModeler::LoopImages

Array of loop image entities.

Definition at line 91 of file FMDataSerialize.h.

SliceContoursMap

typedef std::multimap<OdUInt32, SliceContour> FacetModeler::SliceContoursMap

Definition at line 147 of file FMSliceContourBuilder.h.

SliceNodes

typedef std::vector<OdUInt32> FacetModeler::SliceNodes

Definition at line 166 of file FMSliceContourBuilder.h.

TagType

typedef ptrdiff_t FacetModeler::TagType

Tag type.

Definition at line 46 of file FMMdlBase.h.

VertexImages

typedef std::vector<VertexImage> FacetModeler::VertexImages

Array of vertex image entities.

Definition at line 113 of file FMDataSerialize.h.

VertexIndex

typedef OdArray<Vertex*, OdMemoryAllocator<Vertex*> > FacetModeler::VertexIndex

Definition at line 183 of file FMSliceEngine.h.

Enumeration Type Documentation

anonymous enum

anonymous enum

Enumerator
kExtrudeClosedPath
kExtrudeSmoothAlongPath
kExtrudeSmoothAlongProfile
kExtrudeSingleArcProfile

Definition at line 49 of file FMMdlUtils.h.

BooleanOperation

enum FacetModeler::BooleanOperation

Defines types of boolean operations.

Enumerator
eUnion	Union operation.
eIntersection	Intersection operation.
eDifference	Difference operation.
eXOR	XOR operation.

Definition at line 69 of file FMGeometry.h.

Classification

enum FacetModeler::Classification

Defines classification results.

Enumerator
eNo	Unspecified.
eOn	Lies on.
eInner	Inner position.
eOuter	Outer position.
eSpanning	Spanning.

Definition at line 96 of file FMGeometry.h.

ContourImplClass

enum FacetModeler::ContourImplClass

Enumerator
ecicUnknown
ecicSimple
ecicCached
ecicLast

Definition at line 237 of file FMContoursBase.h.

FaceOrientation

enum FacetModeler::FaceOrientation

Defines face orientations.

Remarks

The default orientation is treated as efoFront. Should not be used.

Enumerator
efoDefault	Default orientation.
efoTop	Placed on the top side.
efoBottom	Placed on the bottom side.
efoLeft	Placed on the left side.
efoRight	Placed on the right side.
efoFront	Placed on the front side.
efoBack	Placed on the back side.
efoDiscard	Discarded orientation.

Definition at line 121 of file FMGeometry.h.

FaceState

enum FacetModeler::FaceState

Enumerator
kInitialFaceState
kFaceToClone
kFaceToRemove
kProcessed

Definition at line 191 of file FMSliceEngine.h.

FilletType

enum FacetModeler::FilletType

Defines gap filling strategy types for offset curve generation.

Enumerator
eftChamfer	Close gaps with straight line segments
eftTangents	Extend segments with tangential rays
eftExtend	Extend segments with tangential rays or circular arcs, depending on segment types
eftCircular	Close gaps with circular arcs

Definition at line 220 of file FMContoursBase.h.

Locations

enum FacetModeler::Locations

Defines possible object placement with respect to another object.

Enumerator
elUnknown	Unknown
elInside	Inside
elOutside	Outside
elOnBound	On bound

Definition at line 187 of file FMContoursBase.h.

MergeFlags

enum FacetModeler::MergeFlags

Defines flags for the mergeSegments method.

Enumerator
emfMergeArcs	Merge circular segments
emfIgnoreMetadata	Merge segments with different metadata
emfMergeOrigin	Merge first and last segments of a closed contour

Definition at line 205 of file FMContoursBase.h.

Operation

enum FacetModeler::Operation

Enumerator
eExtrusion
eRevolution
eInsideBody
eInsideFrame
eCustom
eTemporaryExtensionByTwoContours
eTemporaryExtensionExtrusionByTrs
eclone
enegate
emergeCoincidentVertices
emergeCoplanarEntities
ecombine
ebox
epyramid
eextrusion1
eextrusion2
eextrusion3
erevolution1
erevolution2
einsideBody
einsideFrame
ecustomInternal
esection
ecutWithExtrusion
ecutWithInfExtrusion
eextrude
eTemporary_Extension_byTwoContours
eTemporary_Extension_byTwoProfiles
eTemporary_Extension_extrusionByTrs

Definition at line 39 of file FMGeometryImpl.h.

Result

enum FacetModeler::Result

Defines possible result codes used in Contour2D and Profile2D classes.

Remarks

Warnings are in the range [erWarnings.. erErrors). Errors are greater than erErrors.

Enumerator
erOk	No error
erWarnings	Warning
erWarnParamBounds	Parameter on contour is not valid
erWarnPointNotOnThis	Input point or vector is not on this entity, but it should be
erWarnEmptyContour	Contour is empty
erWarnSmallContour	Contour is too small
erWarnImproperAreas	Region/Profile contours are not valid
erWarnContourNotClosed	A contour is not closed, but it should be
erErrors	Error
erNotImplementedYet	Not implemented
erInvalidIndex	Array/Segment index is out of range
erParamBounds	Parameter value is out of range
erPointNotOnThis	Input point or vector is not on this entity
erInvalidTransform	Invalid (singular) transformation matrix
erWrongSegType	Wrong segment type, another type expected
erEmptyContour	Contour is empty
erSingularPoints	Some points are invalid
erNoMetadata	Metadata is not available and/or can`t be updated
erInvalidArgs	Some input parameters are completely invalid
erContourIsTooSmall	Contour is too small
erSelfIntersecting	Contour or profile is self-intersecting
erInvalidDirection	Contour orientation is not applicable
erContourNotClosed	A contour is not closed, but it should be
erOperationNotApplicable	Operation is not applicable
erFailedToCloseContours	Invalid result in area operation
erImproperRegionBounds	Region/Profile is not valid in a regional operation
erImproperRegionAreas	Region/Profile is not valid in a regional operation
erToleranceViolation	Tolerance is too small, or input contours are singular
erFail	Unknown error
erLastError	Last error

Definition at line 40 of file FMContoursBase.h.

SegmentImplClass

enum FacetModeler::SegmentImplClass

Enumerator
esicUnknown
esicBulgeSeg2D
esicCachedSeg2D
esicLast

Definition at line 245 of file FMContoursBase.h.

SegmentType

enum FacetModeler::SegmentType

Defines types of segments.

Enumerator
estUnknown	Unknown type
estLine	Straight segment with length greater than 0
estArc	Arc segment with length greater than 0
estCoincident	Segment with 0 length

Definition at line 169 of file FMContoursBase.h.

Function Documentation

ClearShadedSurfaces()

FMGEOMETRY_API void FacetModeler::ClearShadedSurfaces

(

Body &

aBody

)

Deletes all the shaded surfaces for the given Body.

Parameters

aBody

[inout] Body to process.

contour2d_mergeSegments()

void FacetModeler::contour2d_mergeSegments ( IContour2D & rContour, int iMergeFlags = 0, const OdGeTol & gTol = FMGeGbl::gTol )

extern

DrawBody()

void FMGEOMETRY_API FacetModeler::DrawBody	(	OdGiCommonDraw *	pDraw,
		const Body &	rBody,
		const OdGeVector3d *	pViewDir = NULL,
		bool	bUseRGBColors = false,
		bool	bUseMappingCoords = false )

Draws the specified body to OdGiCommonDraw with the view direction specified.

Parameters

pDraw	[in/out] Object to draw on.
rBody	[in] Body to draw.
pViewDir	[in] View direction vector for calculating silhouettes as OdGeVector3d.
bUseRGBColors	[in] Defines whether the colors format of this Body is RGB (Arhitecture uses color indices)
bUseMappingCoords	[in] Defines whether mapping coordinates of vertices will be set to VertexData

ExtendContour()

FMGEOMETRY_API void FacetModeler::ExtendContour

(

Contour2D &

rContour

)

ExtendContourEnd()

FMGEOMETRY_API void FacetModeler::ExtendContourEnd

(

Contour2D &

rContour

)

ExtendContourStart()

FMGEOMETRY_API void FacetModeler::ExtendContourStart

(

Contour2D &

rContour

)

extrude()

FMGEOMETRY_API Body FacetModeler::extrude	(	const Profile2D &	base,
		const DeviationParams &	deviation,
		OdUInt32	n,
		const PathNode *	path,
		OdUInt32	flags = 0 )

fast_getInternalPoint()

Result FacetModeler::fast_getInternalPoint ( const IContour2D & rContour, OdGePoint2d & rPoint, const OdGeTol & gTol )

extern

fast_intersect()

Result FacetModeler::fast_intersect ( const IContour2D & rContA, const IContour2D & rContB, std::vector< Intersection > & vecPoints, const OdGeTol & gTol )

extern

fast_isSelfIntersecting()

Result FacetModeler::fast_isSelfIntersecting ( const IContour2D & rContour, const OdGeTol & gTol, bool & bIntersects )

extern

fast_isValidRegion()

Result FacetModeler::fast_isValidRegion ( const IContour2D & rContour, const OdGeTol & gTol, bool & bValidRegion )

extern

FindClosestIntToBaseEnd()

FMGEOMETRY_API bool FacetModeler::FindClosestIntToBaseEnd	(	const Contour2D &	cBase,
		const Contour2D &	cCutter,
		Intersection &	intClosest )

FindClosestIntToBaseStart()

FMGEOMETRY_API bool FacetModeler::FindClosestIntToBaseStart	(	const Contour2D &	cBase,
		const Contour2D &	cCutter,
		Intersection &	intClosest )

FindFarthestIntFromBasePt() [1/2]

FMGEOMETRY_API bool FacetModeler::FindFarthestIntFromBasePt	(	const Contour2D &	cContour,
		const Contour2D &	cCutter,
		const OdGePoint2d &	ptBase,
		Intersection &	outInt )

FindFarthestIntFromBasePt() [2/2]

FMGEOMETRY_API bool FacetModeler::FindFarthestIntFromBasePt	(	const Contour2D &	cContour,
		const OdGeLine2d &	lnCutter,
		const OdGePoint2d &	ptBase,
		Intersection &	outInt )

FindFarthestIntFromPt()

FMGEOMETRY_API Intersection FacetModeler::FindFarthestIntFromPt	(	const OdGePoint2d &	ptBase,
		const std::vector< Intersection > &	vecPoints )

FindFarthestPoint()

FMGEOMETRY_API OdGePoint2d FacetModeler::FindFarthestPoint	(	const OdGePoint2d &	ptOrigin,
		const std::vector< Intersection > &	vecPoints )

FindIntClosestToPt()

FMGEOMETRY_API Intersection FacetModeler::FindIntClosestToPt	(	const OdGePoint2d &	ptBase,
		const std::vector< Intersection > &	vecPoints )

FindMaximumParamA()

FMGEOMETRY_API double FacetModeler::FindMaximumParamA

(

std::vector< Intersection > &

vecPoints

)

FindMinimumParamA()

FMGEOMETRY_API double FacetModeler::FindMinimumParamA

(

std::vector< Intersection > &

vecPoints

)

FindNearestPoint() [1/2]

FMGEOMETRY_API OdGePoint2d FacetModeler::FindNearestPoint	(	const OdGePoint2d &	ptOrigin,
		const std::vector< Intersection > &	vecPoints )

FindNearestPoint() [2/2]

FMGEOMETRY_API OdGePoint3d FacetModeler::FindNearestPoint	(	const OdGePoint3d &	ptOrigin,
		const std::vector< OdGePoint3d > &	vecPoints )

FLAG()

OdUInt32 FacetModeler::FLAG ( OdUInt32 i )

inline

Gets a bit mask for the flag by its index.

Parameters

i	[in] Index of the flag.

Returns

Bit mask as an OdUInt32 value.

Definition at line 38 of file FMMdlEntity.h.

getBaseFaces()

FMGEOMETRY_API void FacetModeler::getBaseFaces	(	const Profile2D &	rProfile,
		std::vector< Profile2D > &	aBaseFaces,
		const DeviationParams &	devDeviation )

GetBoolOperationName()

FMGEOMETRY_API OdString FacetModeler::GetBoolOperationName

(

BooleanOperation

eOperation

)

Returns a name by the specified type of boolean operations.

Parameters

eOperation

[in] Boolean operation type from BooleanOperation enumeration.

Returns

Name of operation as OdString object.

GetProfileWithOffsetSegment()

Result FMGEOMETRY_API FacetModeler::GetProfileWithOffsetSegment	(	const Profile2D &	rSrc,
		Profile2D &	rDest,
		OdUInt32	uContour,
		OdUInt32	uSegment,
		double	dNormalOffset )

intersect_ArcArc()

FMGEOMETRY_API OdUInt32 FacetModeler::intersect_ArcArc	(	const IBulgeSeg2D &	rArc1,
		const IBulgeSeg2D &	rArc2,
		Intersection &	rInt1,
		Intersection &	rInt2,
		const OdGeTol &	gTol = FMGeGbl::gTol )

intersect_ArcInfLine()

FMGEOMETRY_API OdUInt32 FacetModeler::intersect_ArcInfLine	(	const IBulgeSeg2D &	rArcSeg,
		const OdGePoint2d &	ptLineOrigin,
		const OdGeVector2d &	vLineDir,
		Intersection &	rInt1,
		Intersection &	rInt2,
		const OdGeTol &	gTol = FMGeGbl::gTol )

intersect_ArcLine()

FMGEOMETRY_API OdUInt32 FacetModeler::intersect_ArcLine	(	const IBulgeSeg2D &	rArc,
		const IBulgeSeg2D &	rLine,
		Intersection &	rInt1,
		Intersection &	rInt2,
		const OdGeTol &	gTol = FMGeGbl::gTol )

intersect_LineInfLine()

FMGEOMETRY_API OdUInt32 FacetModeler::intersect_LineInfLine	(	const IBulgeSeg2D &	rLineSeg,
		const OdGePoint2d &	ptLineOrigin,
		const OdGeVector2d &	vLineDir,
		Intersection &	rInt1,
		Intersection &	rInt2,
		const OdGeTol &	gTol = FMGeGbl::gTol )

intersect_LineLine()

FMGEOMETRY_API OdUInt32 FacetModeler::intersect_LineLine	(	const IBulgeSeg2D &	rLine1,
		const IBulgeSeg2D &	rLine2,
		Intersection &	rInt1,
		Intersection &	rInt2,
		const OdGeTol &	gTol = FMGeGbl::gTol )

intersect_PointInfLine()

FMGEOMETRY_API OdUInt32 FacetModeler::intersect_PointInfLine	(	const OdGePoint2d &	rPoint,
		const OdGePoint2d &	ptLineOrigin,
		const OdGeVector2d &	vLineDir,
		Intersection &	rInt1,
		const OdGeTol &	gTol = FMGeGbl::gTol )

isError()

bool FacetModeler::isError ( Result eRes )

inline

Checks whether the result is an error.

Parameters

eRes	[in] Value to check.

Returns

true if the value is an error, or false otherwise.

Definition at line 161 of file FMContoursBase.h.

IsIntersectionCloserToPt()

FMGEOMETRY_API bool FacetModeler::IsIntersectionCloserToPt	(	const OdGePoint2d &	ptBase,
		const Intersection &	intCurrent,
		const Intersection &	intToCheck )

isOk()

bool FacetModeler::isOk ( Result eRes )

inline

Checks whether the result is an error.

Parameters

eRes	[in] Value to check.

Returns

true if the value is not an error, or false otherwise.

Definition at line 139 of file FMContoursBase.h.

isWarning()

bool FacetModeler::isWarning ( Result eRes )

inline

Checks whether the result is a warning.

Parameters

eRes	[in] Value to check.

Returns

true if the value is a warning, or false otherwise.

Definition at line 150 of file FMContoursBase.h.

MarkShadedSurfaces()

FMGEOMETRY_API void FacetModeler::MarkShadedSurfaces	(	Body &	aBody,
		double	angleTol,
		bool	bDetectSharpEdges = false )

Creates shaded surfaces for the given Body.

Parameters

aBody	[inout] Body to process.
angleTol	[in] The angle to detect the crease between faces.
bDetectSharpEdges	[in] The flag to perform additional sharp edges detection for better quality.

Remarks

Shaded surfaces allow to calculate vertex normals for shaded rendering of the Body. This function finds 'smooth' areas of the Body and marks them with the common shaded surface.

MergeShadedSurfaces()

void FacetModeler::MergeShadedSurfaces	(	Body &	aBody,
		const OdArray< std::set< Surface * > > &	shadedMergeData )

Merges together different shaded surfaces of the given Body. Replaces surfaces from the set with the first surface.

Parameters

aBody	[inout] Body to process.
shadedMergeData	[in] The set of surfaces to be merged.

nullAttributesForUpdate()

Attributes2D & FacetModeler::nullAttributesForUpdate ( )

extern

operator==()

bool FacetModeler::operator==	(	const SliceContour &	c1,
		const SliceContour &	c2 )

worstResult()

Result FacetModeler::worstResult ( Result eRes1, Result eRes2 )

inline

Definition at line 32 of file FMContoursBaseImp.h.

Variable Documentation

AEF

const OdUInt32 FacetModeler::AEF = FLAG(0)

Silhouette edge flag

Definition at line 33 of file FMMdlEdge.h.

OFF

const OdUInt32 FacetModeler::OFF = FLAG(1)

OFF flag

Definition at line 35 of file FMMdlFace.h.

SKIP_HATCH

const OdUInt32 FacetModeler::SKIP_HATCH = FLAG(18)

Show or hide surface hatch

Definition at line 37 of file FMMdlFace.h.

VEF

const OdUInt32 FacetModeler::VEF = FLAG(1)

Invisible edge flag

Definition at line 35 of file FMMdlEdge.h.

VFF

const OdUInt32 FacetModeler::VFF = FLAG(0)

Visibility flag

Definition at line 33 of file FMMdlFace.h.